http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비정상 해석을 이용한 노즐-로터 축간극 거리에 따른 초음속 터빈 내의 성능특성 연구
정수인(Sooin Jeong),최병익(Byoung-ik Choi),김귀순(Kuisoon Kim) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
본 연구에서는 초음속 충동형 터빈의 노즐과 1단 로터 사이 축 간극 거리를 달리하며 3차원 비정상 유동해석을 수행하고 초음속 터빈의 성능 특성을 분석하였다. 수치계산은 로터 블레이드 높이의 약 6%, 10%, 20%, 30%에 해당하는 터빈의 축 방향 간극 총 네 가지 경우에 대하여 이루어졌다. 3차원 비정상 Navier-Stokes 유동해석에는 상용코드인 FLUENT를 사용하였다. 계산결과는 기존의 초음속 터빈효율 경향과 잘 일치하였으며 특정 축 간극 구간에서 효율의 급격한 감소를 보이고 그 이후에는 큰 변화가 없는 구간이 존재함을 확인하였다. In this study, three-dimensional URANS simulation has been performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations are conducted for four axial gap cases using flow analysis program, FLUENTTM. The results show a good agreement with previous studies and have been found that the turbine efficiency decreases drastically in certain range.
노즐-로터 축간극 거리에 따른 초음속 터빈 내의 성능특성에 대한 수치적 연구
정수인(Sooin Jeong),최병익(Byoung-ik Choi),김귀순(Kuisoon Kim) 한국추진공학회 2015 한국추진공학회지 Vol.19 No.3
In this study, 3-dimensional URANS simulation was performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations were conducted for four different axial gap cases corresponding to about 6%, 10%, 20% and 30% of the blade height, respectively. The results show a good agreement with previous studies and the turbine efficiency decreases drastically in certain range. It is examined that the turbine performance characteristics could change depending on the influence of leading edge shock to the nozzle outlet. It is also found that the entropy rise distributions along the span differ from each other.
대향류 매니폴드 내의 튜브 라운드 적용에 따른 고온 고압 열교환기의 성능특성에 관한 수치적 연구
김상조(Sangjo Kim),최병익(Byoung-ik Choi),김귀순(Kuisoon Kim),손창민(Changmin Son),하만영(Man Young Ha),정지환(Ji Hwan Jeong),고정상(Jeong Sang Go) 한국추진공학회 2011 한국추진공학회지 Vol.15 No.6
The present paper deals with numerical analysis to investigate the effect of rounded tube on the pressure drop and heat transfer in a compact tubular heat exchanger designed for high temperature and high pressure system. The pressure drop and heat transfer in the tubular heat exchanger greatly depend on the location of rounded tubes. The effect of locations of the rounded tubes was also analyzed. Three different locations which were tube inlet, tube outlet, and inlet&outlet were considered. In this paper, the tube with a rounded inlet&outlet showed the minimum pressure drop with decreased heat transfer while the tube with a rounded outlet showed better characteristics of pressure drop and heat transfer compared with the results of original model.