http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최동익,최목균,Choi, Dong-Ik,Choie, Mok-Kyun 대한심미치과학회 1995 Journal of the Korean Academy of Esthetic Dentistr Vol.3 No.1
Ni-Ti alloy has excellent corrosion resistance, biocompatibility, shape memory effect and superelasticity, so it has been used widely in biomedical fields. But it has difficulty in casting due to its high melting temperature and oxygen affinity at high temperature. Recently it has been attempted to cast Ni-Ti alloy using new casting machine and investment. The purpose of this study was to examine the superelastic behavior of cast shape memory Ni-Ti alloy and to compare the mechanical properties of the cast shape memory alloy with those of commercial alloys for removable partial denture framework. Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was cast with dental argon-arc pressure casting machine and Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy, pure titanium were cast as reference. Experimental cast Ni-Ti alloy was treated with heat($500{\pm}2^{\circ}C$) in muffle furnace for 1 hour. Transformation temperature range of cast Ni-Ti alloy was measured with differential scanning calorimetry. The superelastic behavior and mechanical properties of cat Ni-Ti alloy were observed and evaluated by three point bending test, ultimate tensile test, Vickers microhardness test and scanning electron microscope. The results were as follows : 1. Cast Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was found to have superelastic behavior. 2. Stiffness of cast Ni-Ti alloy was considerably lesser than that of commercial alloys for removable partial denture. 3. Permanent deformation was observed in commercial alloys for removable partial denture framework at three point bending test over proportional limit(1.5mm deflection), but was not nearly observed in cast Ni-Ti alloy. 4. On the mechanical properties of ultimate tensile strength, elongation and Vickers microhardness number, cast Ni-Ti alloy was similiar to Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy and pure titanium. With these results, cast Ni-Ti alloy had superelastic behavior and low stiffness. Therefore, it is suggested that cast Ni-Ti alloy may be applicated to base metal alloy for removable partial denture framework.
한국인 정상교합자의 악태모형위에서의 안와평면과 상악견치 사이의 거리
이수인(Soo-In Lee),최목균(Mok-Kyun Choi),김광현(Kwang-Hyun Kim) 대한치과교정학회 1975 대한치과교정학회지 Vol.5 No.1
In orthodontic field, the study on gnathostatic model is very important to the diagnosis and analysis of malocclusion. The purpose of this study is to observe that relation of orbital plane and upper canine in Koreans. We selected 230 cases with normal occlusion, 124 male and 106 female cases aged from 12 years to 25 years, to prepare 230 gnathostatic models, and measured the distance from midpoint of mesio-distal distance of upper canine to orbital plane in gnathostatic model. The results obtained were as follows: 1) The mean value of the distance from upper canine to orbital plane showed no significant change with age. 2) The mean value of the distance from the upper canine to orbital plane was -3.11mm in male and -3.84mm in female. 3) The orbital plane passed through the upper canine in normal occlusion of Koreans.