http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박성현(Sung-Hyun Park),천진녕(Jin-Nyeong Cheon),범용원(Yong-Won Beom),이창진(Chang-Jin Lee),이승찬(Seung-Chan Lee) 한국철도학회 2014 한국철도학회 학술발표대회논문집 Vol.2014 No.5
도시형 자기부상철도는 철제 및 고무차륜 철도시스템과 열차의 주행 및 안내방식이 서로 상이하다. 자기부상철도는 차륜과 레일의 비접촉에 기인한 소음·진동 저감효과가 우수한 친환경적 철도시스템이며, 궤도재료에 대한 유지보수가 상대적으로 적어 타 경량전철시스템과 견주어 환경성 및 유지보수 측면에서 우수성을 지니고 있다. 현재 자기부상철도 실용화 사업과 관련한 연구사업은 대전과학관 노선을 시점으로 하여 인천공항 시범노선의 개통을 앞두고 있으며, 향후 상용화 추진을 위해 선로 및 시설물의 최적화와 관련한 연구사업이 진행 중에 있다. 선로구조물은 자기부상철도 전체 사업비의 약 40~60% 차지하고 있어, 자기부상철도 상용화를 위해서는 타 경전철 시스템과 대비하여 안전성과 경제성이 확보된 선로구조물 최적화 방안이 반드시 필요하다. 본 논문은 자기부상철도 상용화를 위한 경쟁력 확보방안으로 차량제원 및 인천시범노선 성능평가에 근거한 자기부상철도의 선로설계기준 개선방안을 제시하고자 한다. Urban maglev system is a method of propulsion that uses magnetic levitation to propel vehicle with magnets, rather than with wheel, axles and bearing. Maglev trains move more quietly smooth than wheeled mass transit systems without any wheels contacting the rail surfaces. This system offers many attractive benefits, including the ability to operate with steep grades and tight turns, low maintenance and noise, environment friendly. Thus, urban maglev is considered competitive with light railway transit. It is necessary to reduce the cost of Maglev guideway system through that improving the urban Maglev demonstration line in Incheon International Airports. In this paper, in order to optimize the Maglev guideway transit, track design criteria based on quantitative analysis of general design criteria is proposed.
박성현(Sung-Hyun Park),천진녕(Jin-Nyeong Cheon),범용원(Yong-Won Beom),이창진(Chang-Jin Lee),홍희석(Hee-Seok Hong),이승찬(Seung-Chan Lee) 한국철도학회 2014 한국철도학회 학술발표대회논문집 Vol.2014 No.10
현재 자기부상철도 실용화 사업으로 인천공항시범노선에 적용된 레일이음매는 그 형상이 일본의 리니모에 적용된 레일유간장치와 유사하며, 그 기능은 레일과 교량의 신축변위에 대한 궤도구조의 안전성 확보 및 차량분야에서 요구하고 있는 연속적인 갭센서 대향면 형성으로 열차주행 안정성을 확보하는 기능적 특징을 보이고 있다. 그러나 시범노선에 적용된 레일이음매의 경우 신축허용량을 최대 80mm로 제한하고 있으며, 이에 따른 상부구조의 연속화를 통한 구조물 슬림화에 많은 제약이 발생된다. 따라서 본 연구는 레일 및 교량 단부에서 발생되는 신축 허용량이 80mm 이상 발생시 신축에 대한 궤도 안전성은 물론 열차주행 안정성에 문제가 없는 레일이음매의 형식과 형상을 제안하고자 하며, 유한요소해석(FEM)을 통한 구조적 안정성에 대해 검증하였다. Rail expansion joint applied to the IIA"s demonstration line has similar feature to the shape that is rail expansion joint of the Japan"s LINIMO, It can secure running-stability of train as the formation of opposite surface of continuous gap sensor, and ensure track structure stability about displacement by expansion-contraction of bridge. However, the rail expansion joint has limitations to slim structure through the continuous of superstructure because the maximum displacement is limited to 80mm. Therefore, this study propose a shape of rail expansion joint which can secure the stability when expansion or contraction at bridge deck ends and rail ends occurred more than 80mm, and the structural stability was verified through the finite-element method analysis.
이기승(Lee Ki-Seung),천진녕(Cheon Jin-Nyeong),김성칠(Kim Sung-Chil),권순섭(Kweon Soon-Sub) 한국철도학회 2002 한국철도학회 학술발표대회논문집 Vol.- No.-
The transition between bridge or tunnel and plain track has different rail pressure and distributed stress on formation. This paper shows distribution of rail pressure on transition at which spring stiffness are changed. By this study, it is revealed that the changing into relatively high stiffness causes increased rail pressure visibly and draw up dynamic track force. A medium stiffness structure and reinforced rail could be effective for reducing track force on the transition.
박성현(Sung-Hyun Park),문지호(Ji-Ho Moon),천진녕(Jin-Nyeong Cheon),이창진(Chang-Jin Lee) 한국철도학회 2016 한국철도학회 학술발표대회논문집 Vol.2016 No.10
현재 추진 중에 있는 한국형 산악철도 시스템 개발은 자연환경 훼손 최소화를 고려하여 철도전용 선로가 아닌 기존 산악도로를 활용하는 방식으로 철도와 자동차를 공용 운행토록 계획하고 있다. 이에 따른 산악도로의 급경사(180‰), 급곡선(R=10m)구간에서도 운행이 가능한 Rack&Pinion 추진시스템이 도입된 무가선 트램(Tram)차량과 도로에 매립하는 콘크리트 궤도구조 시스템을 개발 중에 있다. 하지만 한국형 산악철도의 개발에 있어서 산악철도가 전용 선로가 아닌 기존의 산악 도로를 활용하고 철도차량이 Rack&Pinion에 의하여 추진되므로 이를 고려한 설계기준 정립이 필요하였다. 따라서 본 논문에서는 산악철도 개발차량의 성능 및 제원을 근간으로 기존의 도로설계기준과 철도설계기준을 만족하는 산악철도 선로설계기준을 제안하고자 한다. Development of mountain railway system is leverage existing mountain road are planned to be used with railway vehicle and car. For this reason, able to operate at mountain railway on steep slope 180‰ and sharp curve R=10m, developing wireless tram and precast embedded rail track system. But, mountain rail system development is, leveraging existing mountain road and rail vehicles are operated by rack & pinion. Therefore, in this paper, based on the performance and specifications of the mountain railway vehicle, we propose the design criteria of mountain railway tracks satisfying the existing road design criteria and railway design criteria.