http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 진석홍(Seuk Hong Jin) (검색결과 4 건)
- 무료
- 기관 내 무료
- 유료
-
진영복,진석홍,문용식,Jin, Young Bok,Jin, Seuk Hong,Moon, Yong Sig 한국압력기기공학회 2011 한국압력기기공학회 논문집 Vol.7 No.4
Pressurized Water Reactor Owners Group(PWROG) proposed and applied a risk-informed inservice inspection(RI-ISI) program to alternate existing ASME Section XI periodic inspections. The RI-ISI programs enhance overall safety by focusing inspections of piping at high safety significant(HSS) and locations where failure mechanisms are likely to be present, and by improving the effectiveness on inspection of components because the examination methods are based on the postulated failure mode and the configuration of the piping structural element. The RI-ISI programs can reduce NDE, man-rem exposure, costs of engineering analysis, outage duration and chance of complicating plant operations etc. RI-ISI methods of piping inservice inspection were applied on 3 units(KSNP : Korea Standard Nuclear Power Plant) and are scheduled to apply on the other units. In this paper, we compared and showed the results of the 2 units and we concluded that the RI-ISI application could enhance and maintain plant safety and give unquantifiable benefits.
-
이상훈,진석홍,김인철,Lee, Sang-Hoon,Jin, Seuk-Hong,Kim, In-chul 한국압력기기공학회 2010 한국압력기기공학회 논문집 Vol.6 No.1
The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.
-
이상훈,진석홍,문균영,Lee, Sang-Hoon,Jin, Seuk-Hong,Moon, Gyoon-Young 한국압력기기공학회 2010 한국압력기기공학회 논문집 Vol.6 No.1
During the period of reinforcement work for the licensing renewal of CANDU NPP, the fuel channels, Calandria tubes and feeders of CANDU Reactor are replaced. The remote visual inspection of Calandria internal is also performed during the period of reinforcement work. This period is a unique opportunity to inspect the inside of the Calandria. The visual inspection for the Calandria vessel and its internals of Wolsong NPP Unit 1 was performed by Nuclear Engineering & Technology Institute(NETEC) of KHNP. To perform this inspection, NETEC developed equipment applied new technology such as the synchronization of 3D CAD, automatic alignment and control system. The inspection confirmed that the Calandria integrity of Wolsong NPP Unit 1 is perfect.
-
주경문(Kyung Mun Joo),진석홍(Seuk Hong Jin),문용식(Yong Sig Moon) 한국비파괴검사학회 2010 한국비파괴검사학회지 Vol.30 No.4
원자력발전소 탄소강 배관의 유체가속부식은 주요 경년열화 현상이며 발전소의 성능 및 안전성을 저해할 수 있다. 유체가속부식 검사는 보온재 제거 및 설치로 상당한 비용이 수반되므로 최근에 보온재 제거가 필요 없고 원거리 검사가 가능한 유도초음파에 대한 관심이 점점 증가되고 있다. 유체가속부식 검출에 유도초음파 적용이 가능하다면 검사 비용 절감이 예상된다. 본 연구의 목적은 유체가속부식 손상 유무를 확인하고 결함 검출능을 결정하기 위함이다. 본 연구에서는, 실제 유체가속부식 손상 시험편의 엘보우 첫 번째 용접부와 두 번째 용접부의 진폭 감쇄비를 측정하기 위하여 3가지 검사 기법을 사용하였다. 연구 결과, 유체가속부식 손상을 검출하기 위한 최적의 검사 기법과 최소 결함 검출능을 도출하였다. Flow accelerated corrosion(FAC) of carbon steel pipes in nuclear power plants has been known as one of the major degradation mechanisms. It could have bad influence on the plant reliability and safety. Also detection of FAC is a significant cost to the nuclear power plant because of the need to remove and replace insulation. Recently, the interest of the guided wave testing(GWT) has grown because it allows long range inspection without removing insulation of the pipe except at the probe position. If GWT can be applied to detection of FAC damages, it will can significantly reduce the cost for the inspection of the pipes. The objective of this study was to determine the capability of GWT to identify location of FAC damages. In this paper, three kinds of techniques were used to measure the amplitude ratio between the first and the second welds at the elbow area of mock-ups that contain real FAC damages. As a result, optimal inspection technique and minimum detectability to detect FAC damages drew a conclusion.
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
