http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전희(Hee Chun),최영준(Young-Jun Choi),최영하(Young-Ha Choi),김학주(Hark-Joo Kim),이시영(Si-Young Lee),정두석(Du-Seok Jeong),신용습(Yong-Seub Shin),최충돈(Chung-Don Choi) (사)한국생물환경조절학회 2007 생물환경조절학회지 Vol.16 No.2
피복자재별로 전광선투과율은 차이가 거의 없었으나, 물방울과 먼지의 부착량이 적은 J-2에서 시설 내 광투과율은 78.2%로 가장 높았다. 자외선 투과율이 완전히 차단된 필름은 J-2이었고, 나머지의 자외선 투과율은 62~76% 정도이었다. 무가온 참외재배시기에 터널 안이 노지보다 기온은 15~21℃, 지온은 20~25℃정도 높았다. 피복자재별로 기온은 6℃, 지온이 5℃ 정도 차이가 나타났으며 기온과 지온 모두 J-2에서 가장 높았다. There was no difference in total light transmissivity of covering materials. But the light transmittance of J-2 in greenhouse was by 78.25 which was higher than any other film. The high light transmittance of J-2 was come from low water condensation and dust attached in film surface. The ultraviolet light of J-3 was completely intercepted. The ultraviolet transmittance rate of others was from 62 to 76%. In no heating oriental melon cultivation, the air temperature in tunnel was 15 to 21℃ higher than outer, and the soil temperature in tunnel was 20 to 25℃ higher than outer. Air temperature and soil temperature of J-2 were higher than any other film.
전희(Hee Chun),최영하(Young-ha Choi),김학주(Hark-joo Kim),이시영(Si-young Lee),염성현(Sung-hyun Yum),강윤임(Yun-im Kang),정두석(Du-seok Jeong) 한국원예학회 2006 원예과학기술지 Vol.24 No.4
피복자재의 투광률을 개선하기 위하여 플라스토머 필름을 비닐하우스에 피복하였다. 시설 내 환경과 풋고추 생육을 조사한 결과, 플라스토머 필름의 표면에 부착된 물방울은 안정적으로 폴리에틸렌 필름보다 4.5-8.9배 적은 양이 측정되었다. 반면에 폴리에틸렌 필름에서는 피복 후 3주간 2,131㎎ 100㎝⁻²에서 199㎎ 100㎝⁻²로 급격한 감소를 보였다. 시설 내 투광률은 플라스토머 필름이 4.2% 높았다. 플라스토머 필름에서 풋고추의 착과율은 15.7% 높고, 과중은 35% 무거워 2005년 5월 20일부터 7월 10일까지의 수량은 156.6kg/10a 많았으며, 수확 과실의 곡과율은 5.2% 낮았다. To improve the transmittance of covering materials in greenhouses, the plastomer film was introduced. The amount of pending water on the surface of plastomer film was stabilized below 97 ㎎ㆍ100 ㎝⁻², which was 4.5 to 8.9 times lower than that of PE film, while that on the PE film was exponentially decreased from 2,131 to 199 ㎎ㆍ100 ㎝⁻² for 3 weeks after covering. The transmittance in the plastomer film house was 4.2% higher compared to that in the PE film house. The fruit setting rate, fruit curved rate, and fruit weight in the plastomer film house were 15.7% higher, 5.2% lower, and 156.6 g per plant heavier than those in the PE film house, respectively.