http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반도체 웨이퍼 가공(FAD) 공정에서의 교육용 컴퓨터 모델 구축
전동훈(Donghoon Jeon),이칠기(Chilgee Lee) 한국정보과학회 2000 정보과학회 컴퓨팅의 실제 논문지 Vol.6 No.3
본 연구는 복잡하고 다양한 반도체 웨이퍼 가공 (FAB) 공정의 전체적인 흐름을 컴퓨터 모델로 구축하고 이를 Device 단면도를 나타내는 프리젠테이션 툴과 연동시키는 교육 모델의 개발을 목적으로 하였다. 급변하는 세계 반도체 시장에서 국내 반도체 업체는 지속적인 기술 개발과 더불어 효율적인 생산관리에 대응할 수 있도록 하여 국제 경쟁력을 키워야 할 것이다. 따라서 본 연구에서 다루어진 공정의 흐름과 각 단위공정의 특성을 바탕으로 설립된 모델은 서울대학교 반도체 공동 연구소를 대상으로 구현되었으나 앞으로 생산 관리를 담당할 국내 반도체 업체들의 신입사원과 현장기술자의 질적 향상을 위한 시청각 교육용 자료로의 활용 시 상당한 효과를 거둘 것이라 예상된다. 이는 생산업체에 국한되어지는 것만은 아니며 반도체 공정에 관련된 대학 학과목에서도 활용되어지리라 생각된다. 또한 확장성과 변화에 유연한 모델을 개발함으로써 반도체 생산 업체들은 구성된 표준 모델을 이용하여 각 회사의 실정에 맞추어 자사에 대한 시뮬레이션을 손쉽게 수행함으로써 많은 교육 효과와 이에 따른 원가 절감의 효과까지 거둘 수 있을 것이다. The importance of the semiconductor industry in Korea has been growing, but the manufacturers are experiencing two major problems: poor optimization of production and low localization ratio of production equipments. Due to the complex manufacturing processes and special features such as OTD (On Time Delivery) and LIPAS (Line Item Performance Against Schedule) possibilities, several attempts to apply MRP or spreadsheet have been failed to meet the expectations. This paper describes the computer modeling technique as the solutions to analyze the problem, to formalize the semiconductor manufacturing process, and to build an advanced manufacturing environments. The computer simulation models are built referring the FAB facilities of the National Inter - University Semiconductor Research Center to show the FAB processes and the functions of each process.
직류 배전망 전력변화장치용 전해 캐패시터의 용량 추정에 관한 연구
하동혁(Donghyuk Ha),전동훈(Donghoon Jeon),최준호(Junho Choi) 대한전기학회 2018 대한전기학회 학술대회 논문집 Vol.2018 No.11
본 논문에서는 기존의 전력변환회로의 구성을 이용하여 추가적인 전류센서, 필터 및 신호주입을 사용하지 않고 스위칭 주파수 성분을 근간으로 알루미늄 전해 캐패시터의 용량을 추정하고자 한다. 본 방식은 알루미늄 전해 캐패시터의 열화상태를 진단하기 위해 FFT를 이용해 스위칭 주파수에 따른 전해 캐패시터 충전전류 및 전압리플의 스위칭 주파수 대역에서의 특성을 분석하여 알루미늄 전해 캐패시터의 용량를 추정하고, 추정된 캐패시턴스의 변화량을 통해 알루미늄 전해 캐패시터의 열화정도를 진단하는 방식이며, 제안된 알루미늄 전해 캐패시터의 열화진단 알고리즘은 시뮬레이션과 모의실험을 통해 성능과 유용성을 검증하였다.
오태곤(Taegon Oh),임진택(Jintaek Lim),최재석(Jaeseok Choi),전동훈(Donghoon Jeon),서철수(Chulsoo Seo),최진산(Jinsan Choi) 대한전기학회 2011 대한전기학회 학술대회 논문집 Vol.2011 No.10
In recent, the importance and necessity of some studies on reliability evaluation of transmission system comes from the recent black-out accidents occurred in the world. This paper evaluates the probabilistic reliability of transmission system which is reflected in the 5th power supply and demand plan in Korea. In order to evaluate the transmission system reliability, Transmission Reliability Evaluation for Large-Scale Systems(TRELSS) is used in this paper.
박정제(Jeongje Park),오태곤(Taegon Oh),조경희(Kyeonghee Cho),최재석(Jaeseok Choi),전동훈(Donghoon Jeon),박영신(Youngshin Park) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
This paper presents the contingency analysis of power system using Transmission Reliability Evaluation for Large-Scale Systems (TRELSS) program. The characteristics of the TRELSSS program are illustrated briefly and the contingencies causing system problem are analyzed using the results from TRELSS program.
박정제(Jeongje Park),오태곤(Taegon Oh),조경희(Kyeonghee Cho),최재석(Jaeseok Choi),전동훈(Donghoon Jeon),박영신(Youngshin Park) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
The quantity evaluation of transmission system reliability is very important under competitive electricity environment. The reason is that the successful operation of electric power under the deregulated electricity market depends on transmission system reliability management. This paper introduces the comparative analysis in reliability assessment of Transmission Reliability Evaluation for Large-Scale Systems(TRELSS) and Power System Simulator for Engineering(PSS/E) for the evaluation of transmission system reliability.