http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mechanical properties of CO2/MIG welded structural rolled steel and stainless steel
임종영,윤명진,김상윤,신현승,김태규 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.1
To accomplish long-term use of specific parts of steel, welding technology is widely applied. In this study, to compare the efficiency inimproving mechanical properties, rolled steel (SS400) was welded with stainless steel (STS304) by both CO2 welding method and MIG(metal inert gas) welding method, respectively. Multi-tests were conducted on the welded specimen, such as X-ray irradiation, Vickers’Hardness, tensile test, fatigue test and fatigue crack growth test. Based on the fatigue crack growth test performed by two different methods,the relationship of da/dN was analyzed. Although the hardness by the two methods was similar, tensile test and fatigue properties ofMIG welded specimen are superior to CO2 welded one.
구조용 압연강재와 스테인리스강재의 CO<sub>2</sub> 용접에 대한 기계적 특성연구
임종영,윤명진,김태현,김상윤,김태규,Lim, Jong Young,Yoon, Myung Jin,Kim, Tae Hyun,Kim, Sang Youn,Kim, Tae Gyu 한국결정성장학회 2013 韓國結晶成長學會誌 Vol.23 No.4
산업시설에는 용접된 구조물에 반복 하중이 발생하여 피로파괴가 발생하고 있는데 이 피로파괴를 줄이기 위해 일반구조용압연강재(SS400)와 스테인리스강(STS304)을 $CO_2$ 용접하여 기계적 특성 분석을 하였다. X-ray 촬영을 하여 결함검사를 하고 용접부에 결함이 없는 시험편으로 경도, 인장, 피로 시험을 하였다. 경도는 SS400과 STS304가 용접된 시험편이 SS304만 용접된 시험편보다 높게 나타났다. 그리고 인장강도와 항복강도는 반대로 SS304만 용접된 시험편이 높았으며 피로한도 또한 마찬가지였다. 따라서 $CO_2$ 용접을 할 경우 융점이 낮고 용접성이 좋은 SS400만으로 용접할 때 더 좋은 성능을 보여준다. It is well known that fatigue failure occur on welded structures in industrial application due to the repetitive load force. In order to decrease the fatigue failure, we analysed the mechanical properties based on their structural aspect, roll steel (SS 400) welded onto stainless steels (STS 304) by $CO_2$ gas as well as structure roll steel welded onto itself. We compared the hardness, tensile and fatigue properties with two kinds of samples which had no defects on the welding part observed by X-ray topographic analysis. It was recognized that the tensile and fatigue strength of SS 400 welded onto itself by $CO_2$ gas was higher than that of SS 400 welded onto STS 304.
감마선 조사법을 이용한 전기방사 나노/마이크로섬유 지지체의 표면 기능화
임종영,신영민,최종배,정진오,권희정,정성인,박종석,임윤묵 한국방사선산업학회 2013 방사선산업학회지 Vol.7 No.1
In tissue engineering application, a fibrous structure of scaffolds has been issued as analternative system to regulate cell survival and tissue regeneration, and electrospinning techniquehas been popularly used to generate fibrous meshes or sheets mimicking the structure of nativeextracellular matrix (ECM). However, recent strategy in the scaffold development is expanded toprovide the structural property as well as a biological property of native ECM, a variety of surfacemodification techniques have been used to introduce biological property. In this study, we developedbiomimetic poly(L-lactide-co-ε-caprolactone) (PLCL) nano- and micro-fibrous scaffolds as aunique platform with structural and biological properties with native ECM using electrospinningmethod and gamma-ray irradiation. Surface morphology of the scaffolds was observed by scanningelectron microscopy, and alteration of surface property was evaluated with toluidine blue O staining,water contact angle measurement and ATR-FTIR analysis.
林鍾永 朝鮮大學校 法政大學 經商學會 學生會 1964 經商論集 Vol.1 No.1
우리나라의 상업교육은 국내실업진흥책의 일환으로서 실과계7 인문계3의 비율로 실업교육에 치중하기 위하여 인문중고등학교의 교과과정에 필수과목으로 상업, 농업, 공업, 수산 등을 과하는 동시에 실업고등학교(예 상업고등학교 등)를 두어 상업실적분야를 교육시키고 있으며 고등교육기관으로서는 선진제국가와 같이 종합대학교의 규모는 아니나 기개의 단과대학(상과대학)을 설치하여 근대적인 상업제학을 교수하고 있어 사학의 발전을 위하여 기대된바가 크다하겠다. 특히 전술한 바와 같이 근래에 미국의 배급론(Marketing)이 전래되어 기업계에서나 또는 학계에서 마케팅의 문제를 본격적으로 연구된 것 같다. 앞으로 상업경영학과 더불어 마케팅을 중심으로 연구발전시켜 전근대적 경영상태를 불면하고 있는 한국상업경영을 과학화하고 근대화하고 또한 합리화 하는 것이 요청되는 것이다. 본 논문은 서두에서 말한바와 같이 상업계에 대하여 학구적인 내용이라기 보다 다만 상업에 대한 학문의 발전과정을 대략적으로 제시하는데에 불과하였다. 철학을 연구하는데에 하나의 참고가 되리라 믿는다.