http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자속구속형 초전도 사고전류 제한기의 직렬연결을 통한 동시 퀜치 특성 향상
임성훈,Lim, Sung-Hun 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.8
본 논문에서는 자속구속형 초전도 사고전류제한기의 전압등급증대를 위한 방안으로 하나의 철심을 매개로 직렬로 연결된 자속구속형 초전도 사고전류제한기를 제안하고 이의 사고전류제한 특성을 분석하였다. 직렬 연결된 각각의 자속구속형 초전도 사고전류제한기의 구조는 두 개의 코일이 하나의 철심을 매개로 병렬로 연결되며 초전도 소자가 두 코일중 하나의 코일과 직렬로 연결된 구조를 가진다. 하나의 철심을 매개로 공유된 내부자속은 직렬연결된 각각의 자속구속형 초전도 사고전류제한기를 구성하는 초전도 소자들의 임계전류차이로 인한 불균일한 전력분담을 균일하게 유지시켜 주는 것을 실험을 통해 확인하였다. To apply the flux-lock type superconducting fault current limiter(SFCL) into power system, its current and voltage ratings are required to increase. Especially, in case of series connection of SFCLs, the countermeasure for simultaneous quenches must be considered. The structure, which each flux-lock type SFCL unit was wound in series on the same iron core, can induce the simultaneous quench of superconducting elements. Through the fault current limiting experiment for the suggested structure, it was confirmed that the even voltage burden among the superconducting elements comprising SFCLs could be made.
두 개의 자기경로 철심을 갖는 코일의 자기결합을 이용한 초전도 전류제한기의 히스테리시스 특성
임성훈,Lim, Sung-Hun 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.12
The iron core, which comprises the superconducting fault current limiter (SFCL) using magnetic coupling of coils, can be operated in the saturation region, especially at the initial fault period. This operation of the iron core in the saturation region deteriorates the fault current limiting operation of the SFCL. To solve the saturation problem of the SFCL using magnetic coupling of coils, the iron core with two magnetic paths, which has an air-gap in one of them, was adopted. In this paper, the hysteresis characteristics of SFCL using magnetic coupling of coils, which were wound in the iron core with two magnetic paths, were analyzed. Through comparative analysis on the hysteresis characteristics of the iron core comprising SFCL, the hysteresis characteristics of the iron core with two magnetic paths were confirmed to be kept in the non-saturation region during the fault period and thus, the effective fault current limiting operation of the SFCL using the magnetic coupling of coils could be performed.
전력계통의 중성선에 적용된 초전도한류기의 대칭고장전류 저감방안 분석
임성훈,Lim, Sung-Hun 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.2
The superconducting fault current limiter (SFCL) applied into the neural line of a power system, which can limit the unsymmetrical fault current from the single-line ground fault or the double-line ground fault, was reported to be the effective application location of the SFCL in a power system. However, the limiting operation for the symmetrical fault current like the triple line-ground fault is not effective because of properties of the balanced three-phase system. In this paper, the limiting method of the symmetrical fault current in a power system with a SFCL applied into neutral line was suggested. Through the short-circuit experiments of the three-phase fault types for the suggested method, the fault current limiting and recovery characteristics of the SFCL in the neutral line were analyzed and the effectiveness of the suggested method was described.
Deinococcus geothermalis의 Xylan 최적 분해조건 및 분해산물 분석
임성훈,조민호,정선욱,임상용,송현파,김동호,Im, Seong-Hun,Joe, Min-Ho,Jung, Sun-Wook,Lim, Sang-Yong,Song, Hyun-Pa,Kim, Dong-Ho 한국미생물학회 2010 미생물학회지 Vol.46 No.3
Deinococcus geothermalis is a moderate thermophillic radiation resistant bacterium producing greater abundance of sugar metabolism enzymes than other Deinococcus species. In this study, optimal condition for xylanolytic activity of D. geothermalis was determined and xylooligosaccharides from oat spelt, beechwood, and birchwood xylan hydrolysates by this organism were analyzed through HPLC. Reducing sugar yield was increased in the order of beechwood, birchwood, and oat spelt xylan. D. geothermalis displayed maximal xylanolytic activity at $40^{\circ}C$ and pH 8.0. Magnesium ion increased xylanolytic activity upto 7.5 fold. Six kinds of xylooligosaccharides (xylose, xylobios, xylotriose, xylotetraose, xylopentaose, and xylohexalose) were detected from beechwood and birchwood xylan reaction products. Among them, xylose was the major product. However, only three kinds of xylooligosaccharides (xylose, xylopentaose, and xylohexalose) were clearly detected from oat spelt xylan. Gamma-ray (50 kGy) treatment of beechwood xylan, birchwood xylan and oat spelt xylan increased xylanolytic activity of D. geothermalis. The results indicate that D. geothermalis and pretreatment of radiation is useful for xylooligosaccharides production. 대표적인 중호열성 방사선저항성 미생물인 Deinococcus geothermalis에는 다른 Deinococcus 속과 비교해 당대사 작용에 관여하는 유전자가 풍부하게 존재하는 특징이 있다. 본 연구에서는 D. geothermalis를 이용하여 xylan의 최적 분해조건을 확인하였고, beechwood xylan, birchwood xylan 및 oat spelt xylan의 최종 분해산물을 HPLC를 이용하여 분석하였다. 기질의 종류에 따른 당화율을 비교한 결과 beechwood xylan, birchwood xylan 그리고 oat spelt xylan 순서로 당화율이 높게 나타났다. D. geothermalis를 이용한 xylan의 최적 분해조건인 $40^{\circ}C$, pH 8.0 그리고 마그네슘 이온을 첨가하였을 때 당화율이 7.5배 증가하였다. Beechwood xylan과 birchwood xylan의 최종 분해산물은 xylose, xylobios, xylotriose, xylotetraose, xylopentaose, 그리고 xylohexalose였으며, xylose의 함량이 가장 높았다. 또한 oat seplt xylan의 최종 분해산물은 xylose, xylopentaose 그리고 xylohexalose가 생성되었다. Xylan의 효율적인 당화를 위하여 전처리 방법으로서 방사선조사를 하였고, 방사선조사 후 D. geothermalis에 의한 beechwood xylan, birchwood xylan 그리고 oat spelt xylan의 당화율이 증가하였다. 본 연구를 통하여 D. geothermalis 및 방사선을 이용한 전처리 방법이 xylooligosaccharides를 생산하는데 유용함을 확인하였다.
임성훈,Lim, Sung-Hun 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.2
The transformer is expected to be an essential component of a superconducting fault current limiter (SFCL) for both the increase of its voltage ratings and the simultaneous quench due to different critical current between high-$T_C$ superconducting (HTSC) elements comprising the SFCL. However, in order to perform the effective current limiting operation of the SFCL, the design for the SFCL considering the hysteresis characteristics of the iron core is required. In this paper, the influence of the hysteresis characteristics of the iron core comprising the transformer type SFCL on its current limiting characteristics was investigated. Through the comparative analysis on the hysteresis curves due to the ratio of the turn number between the 1st and the 2nd windings of the transformer, the proper design condition for the ratio of the turn number to achieve the effective current limiting operation of the transformer type SFCL could be obtained.
션트리액터의 자기결합을 이용한 초전도전류제한기를 구성하는 초전도소자들의 전력부담 분석
임성훈,Lim, Sung-Hun 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.1
The power burden of high-$T_c$ superconducting (HTSC) elements comprising superconducting fault current limiter (SFCL) using magnetic coupling of shunt reactors was analyzed. The magnetically coupled shunt reactors play a role in distributing the even power burden between HTSC elements comprising the SFCL, which contributes to the effective current limiting and recovery characteristics of the SFCL. It was confirmed through the comparative analysis on the SFCLs with both the magnetically coupled and the magnetically uncoupled shunt reactors that the magnetically coupled shunt reactors could improve the SFCL's performance by equalizing the power burden of HTSC elements.
용융온도와 유지시간이 용융법으로 제작한 고온초전도체의 임계특성에 미치는 영향
임성훈,한태희,박경국,임성우,조동언,한병성,Lim, Sung-Hun,Han, Tae-Hee,Park, Kyung-Kuk,Yim, Seong-Woo,Cho, Dong-Eon,Han, Byoung-Sung 한국전기전자재료학회 1998 전기전자재료학회논문지 Vol.11 No.2
The effects of melting temperature and holding time on the critical current density($J_c$) of $YBa_2Cu_3O_x$ based superconducting bulk fabricated by MPMG process were investigated. The amount of the formed $Y_2BaCuO_5$ phases increased with the melting temperature. However, the value of critical current density was highest at 1120 $^{\circ}C$. With this proper melting temperature, the effect of holding time on the critical characteristics was also investigated. In the case of Ag addition, the volume of the formed $Y_2BaCuO_5$ phase when the amount of Ag addition was 10 wt% and 20 wt% was observed to be highest at 20 minute and 40 minute respectively. But in the specimen without Ag, volume of $Y_2BaCuO_5$ phase increased as the holding time increased. The proper melting temperature and the holding time obtained were 1120 $^{\circ}C$ and 20 minute. The long holding time was not effective for the $J_c$ improvement as well as the formation of $Y_2BaCuO_5$.
철심의 자화특성을 고려한 자속구속형 초전도 사고전류제한기의 특성 분석
임성훈,Lim, Sung-Hun 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.11
We investigated the characteristics of a flux-lock type superconducting fault current limiter(SFCL) considering magnetization characteristic of iron core. The flux-lock type SFCL, like other types of SFCLs using the iron core, undergoes the saturation of the iron core during the initial fault time. Therefore, if the design to prevent the saturation of the iron core is considered, the effective fault current limiting operation can be achieved. Through the analysis for its equivalent circuit including the magnetization characteristic of the iron core, the limiting impedance of the flux-lock type SFCL was drawn. The magnetization currents and the limited currents of SFCL, which were dependent on the winding direction and the turns' ratio between two coils, were investigated from the short circuit experiment. It was confirmed that their experimental results agreed with the analysis ones.