http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
물결형 슬릿핀이 장착된 핀-관 열교환기의 습표면 성능 실험
김내현,김정식,조진표,윤재호,백종현,이순구,남승백,권형진,Kim, N.H.,Kim, J.S.,Cho, J.P.,Yun, J.H.,Peck, J.H.,Lee, S.G.,Nam, S.B.,Kwon, H.J. 대한설비공학회 1997 설비공학 논문집 Vol.9 No.2
In this study, the wet surface heat transfer coefficients and friction factors of the heat exchanger with slit-wavy fin were measured. Four sample cores of two or three row with fins of 12 fpi or 16 fpi were tested. Tests were conducted in a closed loop wind tunnel, where the heat exchanger was mounted at 45 degree inclination angle. The wet surface heat transfer coefficient was reduced following the procedure given in ARI 420-81. During the course, new definitions of the $\varepsilon$-NTU applicable to enthalpy driving system were introduced. The wet surface heat transfer coefficients were approximately equal to the dry surface values. However, the friction factors were approximately 120% to 170% higher than those of the dry surface. Both the heat transfer coefficient and the friction factor of the wet surface increased as the relative humidity increased, fin pitch decreased, and the number of row decreased, although the difference was not large.
김내현(N.H. Kim),김정식(J.S.Kim),조진표(J.P.Cho),윤재호(J.H. Youn),백종현(J.H. Baek),이순구(S.G. Lee),남승백(S.B. Nam),권형진(H.J. Kwon) 대한설비공학회 1996 대한설비공학회 학술발표대회논문집 Vol.1996 No.11
본 연구에서는 물결형 슬릿핀이 장착된 핀-관 열교환기의 습표면 열전달계수와 마찰계수가 측정되었다. 열교환기 샘플은 12 fpi와 16 fpi의 2열과 3열, 모두 네 종류로 구성되었다. 시험은 순환형 풍동에서 수행되었고 열교환기는 시험부 내에 45도로 기울게 장착되었다. 습표면 열전달계수는 ARI 410-81에 제시된 절차에 따라 구해졌는데 그 과정 중 엔탈피 구동 씨스템에 적용가능한 ε-NTU의 정의가 새롭게 도입되었다. 습표면 열전달계수는 건표면의 값과 유사하였고 마찰계수는 건표면보다 120% - 170% 증가하였다. 습표면 열전달계수와 마찰계수 모두 큰 차이나지는 않지만 상대습도가 증가할수록, 핀핏치가 감소할수록 그리고 열수가 감소할수록 증가하였다.