http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김원 ( Won Kim ),김영용 ( Young Yong Kim ),손정선 ( Jung Sun Son ),윤두수 ( Doo Soo Yun ),한철 ( Chul Han ),최재곤 ( Jae Kon Choi ),조병욱 ( Byung Wook Jo ) 한국고무학회 2002 엘라스토머 및 콤포지트 Vol.37 No.4
주사슬에 나프탈렌고리와 테트라메틸렌 및 헥사메틸렌 유연격자를 가지면서 트라이어드 메소겐을 갖는 새로운 열방성 방향족 액정 폴리에스테르(TLCP)를 용액중합법에 의하여 합성하였다. TLCP의 함량을 달리하는 TLCP/PEN in situ 복합재료를 용융방사하여 연신비가 각각 다른 단섬유를 제조하고 그들의 열적, 기계적 특성 및 모폴로지를 조사하였다. 합성된 TLCP는 네마틱 액정중합체였으며 고체상에서 액정상으로의 전이 온도는 249 ℃였다. 블렌드내의 TLCP 도메인들은 매트릭스 고분자인 PEN에 잘 분산 되었으며 어떠한 거대 상 분리 현상도 보여 주지 않았다. TLCP 함량의 증가에 따른 블렌드내 PEN의 cold crystallization 온도가 낮아진 것으로 보아서 TLCP가 PEN에 대한 조핵제 역할을 하였음을 알 수 있었다. 블렌드 섬유내의 TLCP의 도메인 크기는 대략 40 ~ 50 nm정도의 미세한 크기였으며 매트릭스와의 사이에 좋은 계면접착력을 보였다. 또한 cold 및 hot-drawing 과정을 거친 낮은 draw ratio(DR)에서는 거의 fibril이 형성되지 않았지만, 높은 DR에서는 잘 발달된 fibril들을 보여 주었다. TLCP의 강화효과로 인하여 10 wt% TLCP/ PEN 블렌드 섬유의 초기 모듈러스는 270 %, 인장강도는 235 %의 증가를 보여주었다. 반면에 신장률은 DR의 증가와 함께 감소 하였다. A thermotropic liquid crystalline polymer(TLCP) which has flexible butylene/hexylene spacers in the main chain and a triad aromatic ester type mesogenic unit containing a naphthyl group was prepared by solution polycondensation. The in-situ composites based on poly(ethylene 2,6-naphthalate)(PEN) and a thermotropic liquid crystalline polymer(TLCP) were prepared and melt spun at different TLCP contents and different draw ratios to produce monofilaments. Blends of the TLCP with PEN were investigated in terms of thermal, mechanical properties and morphology. The TLCP synthesized showed nematic mesophasic behavior and its transition temperature to isotropic melt from mesophase was 249℃. The blends showed well dispersed TLCP phases in the PEN matrix without macroscopic phase separation. Inclusion of TLCP in theblends decreased the cold crystallization temperature of PEN in the blend, therefore, the TLCP acts as a nucleating agent in the blend and showed good interfacial adhesion between the dispersed LCP phases and PEN matrix with domain sizes 40~50 nm in diameter and well developed fibrillation in the monofilaments. The TLCP acted effectively as a reinforcing material in the PEN matrix at the 10wt% level, it led to an increase of initial modulus up to 270% and tensile strength by 235%, while the elongation rate increasing with higher draw ratios.
카복실레이트 유기염을 포함하고 있는 폴리(스타이렌-co-메타크릴레이트) 아이오노머의 성질
나연화,윤두수,이법원,김준섭,최재곤,유지강 조선대학교 생산기술연구소 1999 生産技術硏究 Vol.21 No.1
The dynamic mechanical properties of polyfstyrene-co-sodium methacrylate) ionomer (3.4 mol% of ions) blended with three low-molecular-weight carboxylate organic salts. i.e. sodium benzoate, sodium isophthalata, and sodium benzenetetrabenzoate, were studied. When organic salts were added to ionomers to make 1:1 and 1:2 ratio of mole of caboxylate groups of ionomer/organic salts, it was found that the ionic modulus increased, but that cluster Tg shifted to lower temperature. Thus, it was suggested that part of organic salts participate in the multiplets with ionic groups of the ionomer, resulting in lowering cluster Tg, and that the rest of salts reside in matrix and form ionic aggregates, which act as filler. However. in a 1:8 blend, very weak clustering was found. This means that the ionic groups of ionomer start to form ionic aggregates with any ionic groups in their proximity; thus the number density of chains surrounding multiplets drops drastically, esulting in a very small amount of clusters.