http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
액정 폴리에스테르와 폴리 ( 에틸렌 테레프탈레이트 ) 의 복합재료 연구
최재곤,방문수,한철 ( Jae Kon Choi,Moon Soo Bang,Chul Han ) 한국공업화학회 1997 공업화학 Vol.8 No.1
열방성 액정고분자(TLCP)와 폴리(에틸렌 테레프탈레이트)를 혼합용매 중에서 블렌딩하였으며, 이들 블랜드는 capillary rheometer die를 통하여 287℃에서 섬유상 압출물로 가공되었다. 블렌드와 제조된 복합재료의 열적 성질, 기계적 성질, 모폴로지는 DSC, 편광현미경, SEM 및 인장시험에 의하여 조사되었다. 블렌드의 결정화 동력학은 등온 DSC방법에 의하여 측정된 데이타로부터 Avrami식을 이용하여 결정화 속도 및 결정성장 메카니즘에 대한 정보를 얻었다. 블렌드내의 액정상은 가공온도조건하에서 거대상분리나 열분해현상을 보이지 않았으며, 액체질소 속에서 절단된 섬유 단면의 SEM 관찰에 의하면, 섬유내 TLCP domain은 0.1㎛에서 0.2㎛ 정도의 크기로 분산되었고, 두 상 계면에서의 접착은 잘 되어있음을 알 수 있었다. TLCP/PET in-situ 섬유상 복합재료의 인장강도와 모듈러스는 TLCP 함량이 많을수록, draw ratio가 높을수록 증가됨을 알 수 있었다. Blends of thermotropic liquid crystalline polymer(TLCP) with poly(ethylene terephthalate)(PET) were prepared by the coprecipitation from a common solvent. The blends were processed through a capillary die at 287℃ to produce a monofilament. Morphology and mechanical, thermal properties of blends and composites were examined by differential scanning calorimetry(DSC), tensile test, optical microscopy and scanning electron microscopy. Crystallization kinetics of the blends were investigated by the isothermal DSC method. The Avrami analyses were applied to obtain the information on the crystal growth geometry and factors controlling the rate of crystallization. In the blends, liquid crystalline phase did not reveal any significant macrophase separation and thermal degradation at the processing temperature. From scanning electron micrographs of cryogenic fracture surfaces of extruded fibers, the TLCP domains were found to be more or less finely dispersed with 0.l㎛ to 0.2㎛ in size. Interfacial adhesion betweentheTLCP and matrix polymer was excellent. Tensile strength and modulus of TLCP/PET in-situ fiber composites were enhanced with increasing draw ratio and LCP content.
도시정비사업 활성화를 위한 사전타당성검토 개선방안 연구
최재곤,강정규 한국주거환경학회 2022 주거환경(한국주거환경학회논문집) Vol.20 No.3
부산광역시는 2019년 12월에 발표한 「2030 부산광역시 도시·주거환경정비기본계획」을 통해 신규로 정비예정구역의 지정 없이 주거정비지수를 활용하는 사전타당성검토제도를 도입하였다. 2년이 경과된 시점에 사전타당성검토제도에 대한 문제점과 개선방안을 제시하고자 연구를 진행하게 되었다. 이에 사업자를 보호하고 공공성이 훼손되지 않도록 사례분석과 전문가 심층면접(In-Depth Interview)을 통해 문제점과 개선방안을 도출하였다. 분석결과 개선되어야 할 문제점의 중요도 순위로 1순위 사전타당성검토 권리산정기준일의 변경, 2순위 사전타당성검토 및 정비구역지정 결합하여 절차 이행. 3순위는 사전타당성검토 업무대행업체 자격요건 지정. 4순위는 추진 주체 구성요건 및 업무 범위의 명문화. 5순위 정비사업통합지원단 신설. 이러한 제도개선을 통해 조합의 권리와 사익을 보호하고 공공의 공익이 훼손되지 않고 확대되는 방향으로 도시정비사업이 활성화되어야 한다.
열방성 블록 코폴리에스테르와 poly ( ethylene 2,6- naphthalate ) 의 복합재료 연구 (Ⅰ)
최재곤 ( Jae Kon Choi ) 한국공업화학회 1997 공업화학 Vol.8 No.3
새로운 poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) 블록과 poly (butylene 2,6-naphthalate)(PBN) 블록으로 구성된 열방성 블록공중합체(TLCP-b-PBN)를 용액중합에 의하여 합성하였고, in-situ 복합재료를 제조하기 위해서 poly (ethylene 2,6-naphthalate) (PEN)과 용융블렌드하였다. TLCP domain은 용융상태에서 네마틱 상을 보여 주었다. 블록공중합체는 DSC 열곡선에서 PBN과 TLCP-domain에 해당되는 두 개의 뚜렷한 용융전이점을 보여 주었다. 블렌드내의 PEN의 유리전이온도 (T_g)는 TLCP-b-PBN의 함량에 따라 감소하였으며, TLCP-b-PBN은 매트릭스 고분자에 대한 기핵제로 작용하였다. 편광현미경 관찰결과 20% TLCP-b-PBN 블렌드 경우 PEN의 용융점이상 온도에서 잘 배향된 TLCP fibril을 볼 수 있었다. 압출된 블렌드를 액체질소내에서 절단하여 전자현미경을 이용하여 모폴로지를 관찰한 결과 TLCP domain은 0.15㎛에서 0.2㎛ 크기로 균일하게 분포되어 있음을 확인하였다. 매트릭스 고분자와 TLCP와의 계면접착력은 비교적 좋았으며, 매트릭스 고분자내의 TLCP domain은 중앙에서는 구형의 모양을, 표면에서는 가늘게 배향된 섬유 모양을 보였다. Thermotropic block copolyester(TLCP-b-PBN) based on poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) and poly(butylene 2,6-naphthalate)(PBN) was synthesized by solution polycondensation and melt-blended with poly(ethylene 2,6-naphthalate)(PEN) for in-situ composites. The TLCP domains showed nematic behavior in melt. The composition of block copolymer was determined from ¹H-NMR spectroscopy. The DSC thermogram of block copolymer revealed the presence of two major melting transitions, corresponding to the separate melting of PBN and TLCP domains. The glass transition temperature(Tg) of the PEN in the blends decreased with increasing the content of TLCP-b-PBN and the TLCP-b-PBN acted as a nucleating agent for the matrix polymers. In the 20% TLCP-b-PBN blend, well oriented TLCP fibriles were observed at temperature above the melting point of the PEN by optical microscopy. By scanning electron micrographs of cryogenically fractured surfaces of extruded blends, the TLCP domains were found to be finely uniformely dispersed in 0.15㎛ to 0.2㎛ size. Interfacial adhesion between the TLCP and matrix polymer was seemed to be good. Under certain condition TLCP formed a fiber structure in the PEN matrix, with thin oriented TLCP fibril in the skin region and spherical TLCP domains in the core.