http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양부열,김성현,최승건,최웅걸,장영주,윤태현,백승엽,Yang, Bu-Yeol,Kim, Seong-Hyun,Choi, Seung-Gun,Choi, Ung-Geol,Jang, Young-Ju,Yoon, Tae-Hyun,Baek, Seung-Yub 한국금형공학회 2015 한국금형공학회지 Vol.9 No.3
Although demand for non-metalic materials, acrylic and metal plate material is increased. The complex processing equipment that can machine it at the same time is extremely limited. In case of existing manual multiple routers, it is no substantial demand due to the difficulty in use and low efficiency. In this study, the CNC multiple router was designed. The structural analysis was carried out according to the structure of the bed as a basic step for the development of multiple CNC router system that can guarantee the increase in yield while optimizing the manufacturing process. CNC router added a dummy was carried out about weight analysis and load analysis. Development of a CNC router system will be progressed on the basis of the analysis result.
펄스전해가공을 이용한 인바 박판의 가공 형상 및 Overcutting 현상에 관한 연구
양부열(Bu-Yeol Yang),김성현(Seong-Hyun Kim),최승건(Seung-Geon Choi),최웅걸(Woong-Hirl Choi),전광호(Kwang-Ho Chun),이은상(Eun-Sang Lee) 한국생산제조학회 2015 한국생산제조학회지 Vol.24 No.3
Invar is a compound metal of Fe-Ni system contained 36.5% Ni. The characteristic of invar is that the coefficient of thermal expansion is 1.0×10<SUP>-6</SUP> cm/°C. It is approximately 10 times smaller than series of steel. Because of this low thermal expansion characteristic of Invar, it is used to shadow mask of display device such as UHDTV or OLED TV. In this study, pulse current from pulse generator instead of DC current is used to overcome the disadvantages of the conventional electrochemical machining. Pulsed current with different duty factor in PECM affect the precise geometry. Pulse electrochemical machining is conducted to machine the micro hole to the invar sheet with different duty factor. The machined shape and overcut of invar sheet with different duty factor is observed by optical microscope and scanning electron microscope (SEM).
백승엽(Seung-Yup Baek),윤태현(Tae-Hyun Yoon),양부열(Bu-Yeol Yang),김성현(Seong-Hyun Kim),최승건(Seung-Geon Choi),최웅걸(Woong-Kirl Choi),전광호(Kwang-Ho Chun),진다솜(Da-Som Jin) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
기존 판형 사인에서 고급 입체 사인물의 수요 변화로 아크릴 및 비금속 소재와 판형 금속 소재의 가공 수요는 증가하고 있지만, 이를 동시에 가공할 수 있는 복합 장비는 극히 제한적인 수준이다. 또한, 기존의 수동 복합기의 경우 사용상의 어려움 및 낮은 효율성으로 실질적인 수요가 없는 편이다. 본 논문에서는 가공 공정을 최적화하면서 수익률 증가를 보장할 수 있는 CNC 라우터 복합 시스템의 개발을 위해 기초 단계로서 베드의 구조에 따른 구조해석을 진행하였다. 베드의 스크류의 개수 및 위치에 따른 하중 해석을 진행하였으며, 해석 결과를 바탕으로 CNC 라우터 시스템의 개발을 진행할 것이다.