http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
분위기 조건이 직접분사식 인젝터의 미립화에 미치는 영향
신영진(Young-jin Sin),이중순(Joong-soon Lee),윤수한(Soo-han Yoon),정성식(Sung-sik Cheong),하종률(Jong-yul Ha) 한국자동차공학회 2001 한국자동차공학회 지부 학술대회 논문집 Vol.- No.-
Several efforts to meet the exhaust gas regulation have been undertaken by many researchers in recent years. Main researches are on development of design techniques of intake port and combustion chamber, atomization of fuel and precise control of air-fuel ratio, post-treatment of exhaust gas and so on. Engine technology is changed from PFI to GDI to correspond with exhaust gas regulation. GDI technique makes it possible to preserve lean air-fuel ratio and control accurate air-fuel ratio. Nevertheless, It is not cleared that information of spray characteristics and atomization process are very dependent on fluctuation of pressure and change of temperature in intake stroke. In this study, a constant volume combustion chamber is manufactured to investigate various fluctuations of in-cylinder pressure for injection duration. It is taken photographs of injection process of conventional GDI injector using PMAS. Then, it was verified experimently that ambient conditions as temperature and pressure of combustion chamber have effects on process of spray growth and atomization of fuel.<br/>
李龍浩,姜鉉植,高錫梵,李國行,신영진,梁東翊,朴鎭夏,黃在順,이종명 全北大學校 1983 論文集 Vol.25 No.-
Some physical and chemical properties of liquid quenched Fe_75-χ Cr_χB_15Si_10(0≤χ≤6) and Fe_5Co_70-χ Cr_χB_15Si_10(0≤χ≤9) amorphous alloys are investigated. The χ dependencies of saturation magnetization B_s, coercive force H_c, magnetostriction λ, Young's modulus E, resistivity ρ and magnetoresistance ρ_mρ_m are measured with varying tension σand magnetic field H. When χ increases, B_s, H_c, λ and ρ_m decrease monotonically, while E and ρ increase monotonically. Effective moments of Cr and B_15Si_10 are estimated about -5 and -1∼-0.5 Bohr magneton respectively. Uniaxial Anisotropy of Fe_75B_15Si_10 is about 2.2×10^4 erg/c.c by thermodynamical calculation. Magnetoresitance is closely related to magnetostriction, and shows maximum value about 0.13% at magnetic saturation and no stress in Fe riched alloy. Giant ΔE effect of Fe_75B_15Si_10 alloy is about 70% by static tension experiment. Effect of the amount of Cr on the corrosion behavior of amorphous Fe_5Co70-χ Cr_χ B_15Si_10 alloys are compared by immersion tests. The addition of Cr to this alloys lowers the corrosion rate in 1N HCl, but it has a little effect in 1N H_2SO_4.