http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송면규,한중호,이종녕,양규식 한국정보통신학회 1999 한국정보통신학회논문지 Vol.3 No.2
일반적인 인쇄회로형 안테나는 사용가능 주파수 대역폭이 협소하여 여러 가지 복잡한 과정을 거쳐 대역폭 확장을 위한 대책을 강구하고 있으나, 기존의 실린더형 폴디드 다이폴 안테나의 특성이 단일 다이폴 보다 우수함을 이용하여 이를 인쇄회로형 폴디드 안테나로 개량함으로서 기존의 일반적인 인쇄회로형 보다 넓은 대역폭을 간단한 구조에서 실현할 수 있었다. 급전선로로서는 최근 관심의 대상이 되고 있는 코플레나 도파관(CPW)의 장점을 활용하기 위하여 CPW 선로를 이용하여 급전하도록 하였으나, 인쇄회로형 폴디드 다이폴 안테나의 경우 CPW 선로를 이용할 경우 급전이 복잡하게 때문에, 폴디드 다이폴을 폴디드 슬롯 형태로 바꾸어 설계를 하고, 바비넷 원리를 이용하여 설계 데이타를 간단히 대치할 수 있는 방법을 활용하였다. 설계하고 제작된 CPW급전 폴디드 슬롯 안테나의 특성을 측정한 결과 주파수 대역폭은 약 20% 정도로 기존의 일반적인 형태의 인쇄회로형 안테나보다 현저히 개선됨을 확인할 수 있었다. In general, printed antennas have a narrow bandwidth characteristic and many people want to find out the method of bandwidth improvement through complicated procedures. So we want to reform the conventional printed antenna characteristic by using the folded dipole's superiority to unit dipole. But it is hard to feed the printed folded dipole antenna, we use the CPW, which is widely used in microwave IC or MMIC applications and have many advantages to the conventional microstrip line, to feed the printed folded slot antenna. It is confirmed that the improvement in the bandwidth characteristic of CPW fed folded slot antenna, as much as 20%, through the measurement of designed and implemented antenna.
프린트형 안테나의 접지면 크기에 따른 안테나 특성 변화에 관한 연구
송면규,양규식 한국정보통신학회 2000 한국정보통신학회논문지 Vol.4 No.2
본 논문에서는 접지면의 크기가 안테나의 성능에 미치는 영향을 분석하기 위하여 기존의 프린트형 안테나의 특성 개선 요구에 부응한 안테나를 설계ㆍ제작하여 프린트형 안테나의 접지면의 크기에 따른 특성을 측정, 분석하여 최적의 접지면 크기를 산출하였다. 폴디드 안테나의 특성에 미치는 접지면 효과를 알아보기 위해 동박판을 잘라 기존의 폴디드 슬롯 안테나의 접지면을 확장시켰을 때 임피던스 및 방사 특성의 변화를 조사한 결과 임피던스 특성에는 별로 영향을 주지 않았으나, 방사 특성에는 많은 영향을 미치고 있음을 확인 할 수 있었다. 접지면의 크기를 고려한 엄격한 설계를 위해서는 복잡한 과정을 거쳐야 하지만, 접지면의 효과를 무시할 수 있는 적당한 크기를 산정하여 제작한다면 좀더 간단하게 안테나를 제작할 수 있을 것이다. In this dissertation, in order to analyze the ground plane size which will affect the antenna characteristic, the appropriate antenna was designed and produced in compliance with the needs that the existing antenna should be improved, and then the optimum ground plane size was calculated. It was proved it affected the radiation characteristic greatly but didn't affect the impedance characteristic nearly when ground plane size of the existing folded slot antenna was enlarged with using the copper e cut in some size. Though it require the complicate procedure by the strict design in order to calculate exactly, if it is made of the antenna of the appropriate size that the effect of ground plane can be taken no account, it can be made easily.
송면규,유형열,이헌택,김기문 한국정보통신학회 1999 한국정보통신학회논문지 Vol.3 No.1
In this paper, we analyzed the trends and activities of DGPS facilities and operations in the advanced countries, evaluated requisitions in its relevant part, and proposed preparations to the KORA's policies for estimation the efficiency of KORA's investments in promotions to the DGPS market by introduction of DGPS system in domestic. 본 연구에서는 DGPS 시스템의 국내 도입에 따라 한국무선국사업단에서 시스템을 활용한 수익성 방안을 제시하기 위하여, 이미 실용화되어 있는 선진 각국의 제도 및 체계의 현황을 비교 분석하고 국내 관련사업의 수요를 예측하여, 사업추진에 따른 정책방향과 제반 준비사항들을 제시함으로서 사업의 타당성 여부를 결정하는 기초자료를 도출하였다
900MHz대 FDD방식을 이용한 선내용 Tranceiver에 관한 연구
송면규,조학현,김정년 한국정보통신학회 1998 한국정보통신학회논문지 Vol.2 No.3
The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO & RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather, Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation, and partly modified 900MHz band cordless phone circuit.
증착 기판 온도 제어에 따른 Zn-Mg 박막의 치밀도 및 내식성 향상에 관한 연구
송면규(Myeon-Kyu Song),라정현(Joung-Hyun La),김회근(Hoe-Kun Kim),이상율(Sang-Yul Lee) 한국표면공학회 2017 한국표면공학회지 Vol.50 No.4
In this study, the corrosion resistance of Zn-3wt.%Mg coating was enhanced by controlling the density of coating. During the deposition the substrate temperature was controlled via an intermittent deposition process, resulting in the improvement of coating density. The maximum substrate temperature during this intermittent deposition process could be controlled from 200 ℃ to 80 ℃, depending upon the number of coating layer. The density of Zn-3 wt.%Mg coating increased from 76.1 % to 95.8 % as the substrate temperature was controlled. The salt spray test results revealed that the corrosion resistance of Zn-Mg coated steel could increase 3 times by increasing the density in coatings, while adhesion strength of coating was not changed significantly during 0-T bending test.