http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기계적 교반유동층에서 미세입자의 최소유동화속도에 미치는 교반속도와 온도의 영향
배달희,류호정,선도원,진경태,이동규,최정후 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.2
응집성이 있는 Geldart 분류 C 입자계의 최소유동화속도에 미치는 교반속도와 온도의 영향을 고찰하기 위해 층물질로 벤토나이트 입자(평균입경 3.7㎛, 입자밀도 1,681㎏/㎥)를 사용한 고온교반유동층(내경 0.05m, 높이 1.31m)에서 교반속도(rpm)와 층온도의 변화에 따른 층내압력강하 및 압력요동신호를 측정하여 최소채널링속도 또는 최소유동화속도를 측정 및 고찰하였다. 기계적 교반이 없는 경우에는 채널링이 일어났으며 교반에 의해 미세입자의 유동화가 가능하였다. 측정된 최소 채널링속도와 최소유동화속도는 온도가 증가함에 따라 증가하는 경향을 나타내었으며 교반속도가 증가함에 따라 감소한 후 다시 증가하는 경향을 나타내었다. 기존의 최소유동화속도 상관식을 수정하여 본 실험에서 측정된 온도변화에 따른 최소유동화속도의 변화경향을 예측할 수 있는 상관식을 제시하였다. To interpret the effects of agitation speed and temperature on the minimum fluidization velocity, bed and distributor pressure drop and pressure fluctuation signal have been measured in a high temperature mechanically agitated fluidized bed(0.05m i.d. and 1.31m high) using bentonite(mean particle diameter: 3.7㎛, apparent density: 1,681㎏/㎥) as bed material. Fluidization of very fine cohesive powder is possible if mechanical energy is introduced into the bed by agitation. Measured minimum channeling velocity and minimum fluidization velocity increased with increasing bed temperature, however, increased after an initial decrease with increasing agitation speed. The empirical correlation, considering the temperature effect but no effects of agglomerate size and density, on the minimum fluidization velocity of cohesive particles has been proposed on the basis of the experimental data of present study.
배달희,조성호,선도원,문영섭 한국에너지학회 2007 에너지공학 Vol.16 No.1
석탄 열분해 공정은 석탄의 종류와 산지에 따른 변화가 커서 반응특성을 석탄의 모든 종류에 일반화시키기는 어려우며, 열분해, 가스화 및 연소현상이 동시에 발생하므로 석탄의 종류에 따라 운전조건을 변화시켜 실험장치로부터 최적의 반응 조건을 찾는 것이 중요하다. 본 연구에서는 키데코탄을 대상으로 압력 2 kgf/cm2 온도 735~831oC의 가압유동층 반응기에서 가스화 반응을 수행하였으며 스팀공급량, 석탄공급량, 공기공급량 등 실험 변수에 따른 가스화 반응의 변화를 관찰하였다. 또한 여러 실험변수들의 변화에 따른 생성가스 성분의 변화를 정량적으로 분석하고, 생성가스 중 H2와 CO의 농도를 기준으로 최적의 반응 조건을 결정하였다. 본 실험에서의 최적의 반응 조건은 공기/석탄 비 4.45, 스팀/석탄 비 0.21이었다. 가스화 반응보다 연소반응이 활발하게 일어나면 반응온도가 급격히 증가하므로 안정적인 가스화를 위하여 석탄과 스팀의 주입속도 조절이 매우 중요하였다. 연속운전을 위한 안정적인 운전조건에서 생산되는 발생가스의 CO의 농도는 약 18%, H2의 농도는 약 17%였다.
고정층과 순환유동층에서 CaSO_4의 환원반응에 대한 온도와 CO농도의 영향
배달희,류호정,박재현,이창근,선도원,이동규 한국화학공학회 2003 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.41 No.1
순환유동층 석탄연소로에서 석회석에 의한 찰황반응에 영향을 미치는 CaSO_4의 환원반응에 의한 SO-2 재배출을 실험적으로 확인하고 SO_2의 재배출에 미치는 온도와 CO 농도의 영향에대해 상용 순환유동층에 적용할 수 있는 기초자료를 확보하기 위해 고정층과 순환유동층에서 층물질로 석회석과 상용 순롼 유동층 하부회를 이용하여 환원실험을 수행하였으며 CaSO_4의 환원반응에 미치는 온도와 CO의 영향을 측정 및 해석하였다. 고온조건에서 CO가 환원제로 작용하여 C_aSO_4로부터 SO_2가 재배출되는 현상을 확인하였으며 CaSO_4로부터 SO_2의 재배출은 온도와 CO농도가 증가함에 따라 증가하였다. 본 실험의 결과에 의해 온도가 증가함에 따라 석회석에 의한 탈황율이 감소하는 현상을 환원이론으로 설명할 수 있다는 것이 확인되었다. For qualitative understanding of the sulphur capture process in a circulating fluidized bed fumace, the effects of temperature and CO concentration on the reactivity of partially sulfated CaO were experimentally examined. The tests were performed in a fixed bed reactor and lab-scale circulating fluidized bed reactor. The materials used were partially sulfated domestic limestone and bottom ash drained from commercial circulating fluidized bed furnaces. The re-emission of SO_2 from partially sulfated limestone and bottom ash increases with temperature as well as with concentration of the reducing agent CO. From the results of this study, the temperature dependence of sulfation could be explained by reduction theory.
Hydrodynamics of a hybrid circulating fluidized bed reactor with a partitioned loop seal system
배달희,Minyoung Yun,문종호,진경태,선도원,Chan Seung Park,Joseph M. Norbeck 한국화학공학회 2015 Korean Journal of Chemical Engineering Vol.32 No.7
A circulating fluidized bed (CFB) with a hybrid design has been developed and optimized for steam hydrogasification. The hybrid CFB is composed of a bubbling fluidized bed (BFB) type combustor and a fast fluidized bed (FB) type gasifier. Char is burnt in the combustor and the generated heat is supplied to the gasifier along with the bed materials. Two different types of fluidized beds are connected to each other with a newly developed partitioned loop seal to avoid direct contact between two separate gas streams flowing in each fluidized bed. Gas mixing tests were carried out with Air and Argon in a cold model hybrid CFB to test the loop seal efficiency. Increase in solid inventory in the loop seal can improve the gas separation efficiency. It can be realized at higher gas velocity in fast bed and with higher solid inventory in the loop seal system. In addition, bed hydrodynamics was investigated with varying gas flow conditions and particle sizes in order to obtain a full understanding of changes of solid holdup in the FB. The solid holdup in the FB increased with increasing gas velocity in the BFB. Conversely, increase in gas velocity in the FB contributed to reducing the solid holdup in the FB. It was observed that changing the particle size of bed material does not have a big impact on hydrodynamic parameters.