http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
램프-적분을 이용한 용량차-시간차 변환기 및 디지털 습도 조절기에의 응용
朴志晩(Ji Mann Park),鄭元燮(Won sup Chung) 大韓電子工學會 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.12
새로운 램프-적분을 이용한 용량차-시간차 변환기를 제안했다. 제안된 회로는 상하대칭으로 두 개의 전류 미러, 두 개의 슈미트 트리거, 그리고 제어 논리-회로로 구성된다. 전체 회로를 개별 소자들로 꾸며, 실험한 결과, 제안된 변환기의 센서 커패시터가 295㎊에서 375㎊까지의 커패시턴스 변화에서 1%보다 작은 시간 간격(펄스 폭)의 선형 오차를 가진다는 것을 알았다. 제안된 변환기가 335㎊의 센서 커패시턴스를 가질 때, 측정된 용량차와 시간차는 각각 40㎊와 0.2 ㎳이었다. 이 시간차를 빠르고 안정된 클럭으로 카운트함으로써 고 분해능을 제공한다는 것을 알았다. 새로운 램프-적분을 이용한 용량차-시간차변환기를 사용하여 디지털 습도 조절기를 설계하고 실험하였다. 제안된 회로는 전원 전압이나 온도 변화에도 불구하고 용량차에는 거의 영향을 받지 않는다. 또한 제한된 회로는 적은 수의 MOS 소자로 실현되므로, 작은 칩 면적 위에 집적화 할 수 있는 특징을 갖는다. 따라서 이 회로는 온-칩(on-chip) 인터페이스 회로로 적합하다. A novel capacitance deviation-to-time interval converter based on ramp-integration is presented. It consists of two current mirrors, two schmitt triggers, and control digital circuits by the upper and lower sides, symmetrically. Total circuit has been with discrete components. The results show that the proposed converter has a linearity error of less than 1% at the time interval(pulse width) over a capacitance deviation from 295 ㎊ to 375 ㎊. A capacitance deviation of 40 ㎊ and time interval of 0.2 ㎳ was measured for sensor capacitance of 335 ㎊. Therefore, the high-resolution can be known by counting the fast and stable clock pulses gated into a counter for time interval. The application of a novel capacitance deviation-to-time interval converter to a digital humidity controller is also presented. The presented circuit is insensitive to the capacitance difference in disregard of voltage source or temperature deviation. Besides the accuracy, it features the small MOS device count integrable onto a small chip area. The circuit is thus particularly suitable for the on-chip interface.
문턱 레벨과 포화 레벨을 전류로 제어할 수 있는 OTA-R 슈미트 트리거
김건,박지만,정원섭,Kim, Kun,Park, Ji-Mann,Chung, Won-Sup 대한전자공학회 1996 전자공학회논문지-B Vol.b33 No.10
A current-controlled OTA-R schemitt trigger circuit is described. It consists of two OTA's and two resistors. The output level of the circuit is determined by one OTA and one resistor, and the threshold level by the other OtA and resistor. The theory of operation is presented and computer simulation results and experimental results using CMOS arrays are used to verify theoretical predictions. The results show close agreement between predicted behaviour and experimental performance.
RFID를 위한 내장형 비접촉(Type-B) 프로토콜 지원 모듈 설계 및 구현
전용성,박지만,주홍일,전성익,Jeon, Yong-Sung,Park, Ji-Mann,Ju, Hong-Il,Jun, Sung-Ik 한국정보처리학회 2003 정보처리학회논문지 A Vol.10 No.3
RFID의 대표적 예인 비접촉식 IC 카드는 현재 교통 및 출입 통제 시스템 등에 널리 사용되고 있으며, RF 기술의 발달과 사용자 편의성 요구의 증대로 인해 점점 더 보편화되는 추세에 있다. 본 논문은 비접촉 IC 카드를 구현하기 위해 필요한 내장형 비접촉 프로토콜 처리용 하드웨어 모듈에 관한 것으로서 아날로그 회로부와 특화된 디지털 로직부로 구성된다. 그리고 비접촉 IC 카드 설계시 아날로그 회로, 디지털 로직, 그리고 소프트웨어가 담당한 기능을 잘 구분하여 설계할 수 있는 방법을 제시한다. In recent, as a typical example of RFID, the contactless IC card is widely used in traffic, access control system and so forth. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process embedded contactless protocol for implementation contactless IC card. And the hardware module consists of analog circuits and specific digital logic circuits. This paper also describes more effective design method of contactless IC card, which method separates into analog circuit parts, digital logic circuit part, and software parts according to the role of the design parts.