http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기체 중심 스월 동축형 분사기의 불안정성 분무 현상과 연소기 설계
박구정(Gujeong Park),배진현(Jinhyun Bae),이수지(Suji Lee),이정호(Jungho Lee),윤영빈(Youngbin Yoon) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
한국형발사체 개발 이후 우리나라도 더 높은 효율을 가진 액체 로켓 엔진 개발이 필요하다. 이에 따라서 가스 발생기 엔진보다 높은 효율을 가진 다단 연소 사이클 엔진의 분사기에 대한 연구가 필요하고 주로 사용되는 기체 중심 스월 동축형 분사기에 대한 분무 불안정성 연구를 진행하였다. 또한 이 분사기를 이용하여 추후 연소불안정성에 대한 연구를 위하여 모형 연소기 설계 및 연구 계획을 설명하였다. After the development of KSLV-Ⅱ, We need to higher efficiency engines than KSLV-Ⅱ. The study for staged combustion cycle engine which has higher efficiency than the gas generator cycle engine is required. We conducted the research about gas-centered swirl coaxial injector which usually used in the staged combustion cycle engine. Also, using the gas centered swirl coaxial injector, design and research plan of a model combustor were explained for experiment about the combustion instability.
토모그래피 기법을 이용한 스월 인젝터의 분무 분포 계측
박구정(Gujeong Park),조성호(Seongho Cho),정재묵(Jaemook Chung),김태성(Taesung Kim),윤영빈(Youngbin Yoon) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
고압의 주위 압력 영역에서 토모그래피 기법을 이용하여 분무의 단면을 구성하였다. 구성된 분무 단면은 Indirect Photography method를 이용한 이미지와 함께 비교되어 분무 단면의 크기를 확인하였고 토모그래피에 의해 재구성된 단면의 경계를 설정할 수 있었다. 이를 통해 고압의 주위 압력 영역에서도 토모그래피를 적용하여 분무를 구성할 수 있다는 것을 확인하였다. This study constructed the spray distribution by the Tomography method at high pressure condition. The constructed spray distribution was compared with the images by Indirect Photography method so that the spray size was confirmed and took the boundary of the distribution. It was confirmed that the Tomography applies to construct the distribution at high pressure.
운동량 비 변화에 따른 기체 중심 스월 동축형 분사기의 분무 특성 변화
박구정(Gujeong Park),이정호(Jungho Lee),이인규(Inkyu Lee),윤영빈(Youngbin Yoon) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.5
기체 중심 스월 동축형 분사기에서 기체-액체 운동량 비에 따른 분무 특성을 파악하였다. 운동량비가 증가하면 기체의 운동량이 액체 운동량보다 커지게 되고 기체의 축 방향 운동량이 분무에 큰 영향을 미친다. 이에 따라 운동량 비가 커지면 분무각은 감소한다. 또한 리세스 길이가 길어지게 되면 기체-액체의 혼합영역이 증가하게 되어 기체의 영향이 증가하게 되고 분무각은 감소한다. The objective of this work was to investigate the spray characteristics of gas centered swirl coaxial injectors according to the gas-liquid momentum flux ratio which is the key parameter of coaxial injectors. The results showed that the spray angle decreased as the momentum flux ratio increased. At the low liquid differential pressure and high gas velocity, the variation of spray angle increased larger than the condition at the high liquid differential pressure and low gas velocity. As the recess length increased, that is the mixing area of gas and liquid, the spray angle decreased because the effect of gas became larger.
기체 중심 스월 동축형 분사기에서 갭 두께 변화에 따른 분무 특성 연구
박구정(Gujeong Park),이정호(Jungho Lee),윤영빈(Youngbin Yoon) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
기체 중심 스월 동축형 분사기에서 갭 두께의 변화에 따른 분무특성을 평균 액막 두께와 분무각을 통하여 파악하였다. 기체-액체 운동량 플럭스 비가 증가함에 따라 액막 두께와 분무각은 감소하는 경향을 보였다. 갭 두께가 증가했을 때 갭 공간에 액막이 가득히 차지 않는 경우가 발생하여 일정 두께 이상의 액막이 형성되지 않는 것을 확인할 수 있었다. The spray characteristics on gap thickness were investigated by the average film thickness and spray angle in the gas-centered swirl coaxial injectors. The film thickness and spray angle had generally decreasing tendency as the momentum flux ratio increased. although the gap thickness was large, the gap was not filled with water so that the film was not formed over certain thickness.
조성호(Seongho Cho),박구정(Gujeong Park),길태옥(Taeock Khil),윤영빈(Youngbin Yoon) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.4
액체 질소를 이용하여 극저온 단일 제트 유동의 특성을 관찰하였다. 고압 챔버 내부에 액체 질소를 분사하여 단일 제트를 생성, 주위기체압력을 변화시킴으로써 아임계 조건부터 초임계 조건의 주위 환경에 따른 제트의 특성 변화를 확인하였다. 또한 분사기의 길이 대 직경비 및 분사기 내부 형상의 변화에 따른 제트의 특성 변화를 파악하였다. 유동 가시화를 통하여 극저온 제트의 형상 및 액주의 지름을 측정하였으며, 이로부터 액주의 확산각을 계산하여 이전 연구 결과와 비교하였다. 아임계 조건 및 초임계 조건에서의 제트의 형상 변화를 관찰하였으며, 주위기체압력이 대기압과 동일할 경우 제트 유동에서 불안정이 발생함을 확인하였다. 또한 주위기체합력이 증가함에 따라 액주의 확산각이 점차 증가하다가 일정 압력 이상에서 거의 일정하게 유지됨을 확인하였다. Characteristics of cryogenic single jet flow were investigated. Liquid nitrogen was injected into a high-pressure chamber and formed single jet. Ambient condition around jet was changed from subcritical to superctirical condition of nitrogen. Injector geometries also were changed. A shape of the jet and core diameter were measured by flow visualization technique, and core spreading angle was calculated. Flow instability was found at atmospheric pressure condition. As ambient pressure increased, core spreading angle was increased and maintained after certain pressure.
기체 중심 동축형 분사기의 갭 두께 변화에 따른 액체 가진 연구
오석일(Sukil Oh),박구정(Gujeong Park),김성주(Seongju Kim),이형원(Hyeongwon Lee),윤영빈(Youngbin Yoon) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
액체 로켓엔진에서 연소불안정 연구는 연소효율 저감 및 연소실 파괴를 예방하기 위해 중요하다. 이러한 연소불안정 현상을 해결하고자 단일 분사기의 액체 가진을 통한 연구들이 진행되어왔다. 하지만 실제 로켓 엔진에서는 동축형 분사기가 사용되기 때문에 동축형 분사기에서의 액체 가진 연구가 필수적이다. 본 연구에서는 기체 중심 스월 동축형 분사기에서 갭 두께의 변화를 통해 동특성을 파악하였다. It is important to study on the combustion instability to develop liquid rocket engines for preventing lower combustion efficiency and destruction of combustion chamber . There are many researches on simplex injector with liquid pulsation to solve this problem. In real rocket engine system, however, they use coaxial injectors. Therefore, research on coaxial injector with liquid pulsation is essential. In this study, we investigate dynamic characteristics of gas centered swirl coaxial injector varying gap thickness.
리세스 길이 변화에 따른 기체 중심 스월 동축형 분사기의 기체 가진 동특성 연구
이정호(Jungho Lee),박구정(Gujeong Park),윤영빈(Youngbin Yoon) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
액체로켓 엔진에서 연소불안정 현상의 해결은 필수적이다. 세계적으로 이러한 연소불안정 현상을 해결하고자 하는 다양한 연구들이 존재해왔다. 본 연구에서는 연소불안정을 억제하고자 하는 노력의 일환으로써 분사기가 일종의 완충장치의 역할을 하여 공급라인에서부터 들어오는 교란을 억제할 수 있는 설계를 찾고자 한다. 기체 중심 스월 동축형 분사기에서 기체 추진제가 유동의 교란을 가진 상태로 공급되는 상황을 모사하여 분사기 리세스 길이, 기체-액체 운동량 플럭스 비를 변화시켜가며 주파수 별로 액막의 응답특성이 어떻게 변화하는지를 확인하였다. Combustion instability is critical problem in developing liquid rocket engine. There have been many efforts to solve this problem. In this study, we want to find the optimal design of injector for suppressing propellant oscillation which can cause combustion instability. Especially we target at gas propellant oscillation in gas-centered swirl coaxial injector. Recess length and gas-liquid momentum flux ratio are changed at various frequency oscillation to find the response characteristics of liquid film and spray.
기체 중심 동축형 분사기의 접선방향 유입구 지름 변화에 따른 액체 가진 연구
오석일 ( Sukil Oh ),박구정 ( Gujeong Park ),김성주 ( Seongju Kim ),이형원 ( Hyeongwon Lee ),윤영빈 ( Youngbin Yoon ),최정열 ( Jeong-yeol Choi ) 한국액체미립화학회 2017 한국액체미립화학회지 Vol.22 No.2
It is important to study on the combustion instability to develop liquid rocket engines for preventing lower combustion effi-ciency and destruction of combustion chamber. There are many researches on simplex injector with liquid pulsation to solve this problem. In real rocket engine system, however, they use coaxial injectors. Therefore, research on coaxial injector with liquid pulsation is essential. In this study, we investigate dynamic characteristics of gas centered swirl coaxial injector varying tangential inlet diameter. A mechanical pulsator was used to generate an excitation in the liquid flow, and the response char-acteristics of the injector were confirmed. As tangential inlet diameter increased, mass flow rates increased and spray angle decreased. As tangential inlet diamter decreased, gain decreased because the pressure fluctuation in the injector manifold rarely passed through the inlet. Additionally, it was confirmed that a sufficiently small tangential inlet served as a damper.
운동량 플럭스 비의 변화에 따른 기체 중심 스월 동축형분사기의 기체 가진 동특성 연구
이정호 ( Jungho Lee ),박구정 ( Gujeong Park ),윤영빈 ( Youngbin Yoon ) 한국액체미립화학회 2015 한국액체미립화학회지 Vol.20 No.3
Combustion instability is critical problem in developing liquid rocket engine. There have been many efforts to solve this problem. In this study, the method was sought through the injector as part of these efforts to suppress combustion instability. If the injector can suppress the disturbance coming from the supply line as a kind of buffer it will serve to reduce combustion instability. Especially we target at gas propellant oscillation in gas-centered swirl coaxial injector. The phenomenon is simulated with acoustic excitation of speaker. The film thickness response at injector exit was measured by using a liquid film electrode. Also the response of spray to the disturbance was observed by high-speed photography. Gas-liquid momentum flux ratio and the frequency of feeding gas oscillation were changed to investigate the effect of these experimental parameters. The trend of response by varying these parameters and the cause of weak points was studied to suggest the better design of injector for suppressing combustion instability.