http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문홍열(Hong-Youl Moon),박상호(Sangho Park) 한국항공우주학회 2018 韓國航空宇宙學會誌 Vol.46 No.7
본 논문에서는 하나의 큰 태양전지판 전개시험을 위해 새로운 전개시험장치를 제안하였다. 지상에서 전개시험을 수행하기 위해서는 궤도에서와 유사한 무중력 환경을 만들기 위해 중력 보상을 고려한 장치를 사용해야 한다. 기존에 주로 사용되는 전개시험장치를 시험하고자 하는 태양전지판 전개에 적용 가능한지 판단하기 위해 간단한 개념설계, 해석 그리고 시험 등을 통해 장단점을 분석하였다. 지상 시험의 문제점인 공기저항 문제를 해결하기 위해 더미 프레임을 제안하였으며 중력축과의 정렬 문제를 해결하기 위해 전개 장치에 자동조심 베어링 및 조절나사를 적용하였다. 그리고 테잎 스프링 힌지축의 변화를 보상하기 위해 반지름 방향 이동을 위한 수평 이동 베어링이 적용되었다. 이로부터 본 논문에서 전개하고자 하는 태양전지판에 특성화된 새로운 전개시험장치를 개발하고 검증함으로써 기존 전개시험장치의 문제점을 해결하였다. In this paper, we propose a new deployment test equipment that is characterized for the deployment test of single large solar panel with tape spring hinge. To perform the deployment test on ground, a device that takes gravity compensation into account should be used to create a zero gravity environment similar to that in orbit. We analyzed the advantages and disadvantages of the most commonly used deployment test equipment in the past through simple conceptual design, analysis, and tests to judge whether it is applicable to the deployment of the solar panel to be tested. A dummy frame was proposed to reduce the air drag effect during on-ground test and a self-aligning ball bearing and adjusting screws were applied to the deployment test equipment to solve the alignment problem with the gravity axis. And a horizontal bearing for radial movement applied to compensate for the change of the axis of the tape spring hinge. From these, we solved the problems of the conventional deployment test equipment by developing and verifying the new deployment test equipment characterized for the solar panel to be deployed in this paper.
문홍열(Moon Hong-You),김진희(Kim Jin-Hee),우성현(Woo Sung-Hyun),조창래(Cho Chang-Lae) 한국항공우주연구원 2010 항공우주산업기술동향 Vol.8 No.2
질량이 크고 정밀한 정렬이 요구되는 전개형 영상 레이더를 장착하기 위해서는 일반적으로 위성을 수평상태로 놓고 조립을 수행하게 된다. 이는 전개형 안테나의 회전축을 중력축과 일치시키고 전개형 안테나를 중력방향과 반대로 질량을 보상함으로써 무중력 상태를 만들어 회전축에 무리한 힘을 가하지 않기 위함이다. 이러한 전개형 영상 레이더를 장착하기 위해서는 위성이 수평 상태로 놓이더라도 위성체 처짐이 없는 수직상태와 동일한 형상을 만들어 주어야 한다. 처짐이 발생한 위성체에 안테나를 장착하고 수직상태로 변경하면 처짐이 발생한 부분이 강제적으로 원상복귀하려는 힘으로 인해 안테나 정렬이 틀어질 수 있기 때문이다. 본 논문에서는 수평상태에서 위성의 처짐값을 확인하기 위한 방안을 찾고 처짐 보상을 위한 Reaction Force 값을 어떻게 구할 것인지를 보여주고 있다. Satellites are generally put in horizontal configuration to install a weighty, large and deploying SAR antenna which is required precise alignment. It is not to damage an antenna deployment mechanism from impellent strength as SAR antenna rotation axis is aligned with the gravity axis and SAR antenna is put in a zero gravity condition. In order to install such a deploying antenna, satellite should be a same condition of the vertical configuration without the deflection of satellite when it is rotated horizontally. In this paper, it is shown how to measure the deflection of satellite and how to get a reaction force value for compensating the deflection.
레이저 트래커를 이용한 태양전지판 전개시험장치의 중력축 정렬
문홍열(Hong-Youl Moon),박상호(Sangho Park) (사)한국CDE학회 2018 한국CDE학회 논문집 Vol.23 No.3
In this paper, a gravity-axis alignment method is proposed for the deployment test whose equipment consists of a deployable solar panel, tape spring hinges, a deployment fixture, and a rotational structure with a zero-G device. If the deployment test equipment is not precisely aligned to the gravity axis, disturbances induced by its misalignment give critical impacts to the onground deployment test capability. In order to align the test equipment with the gravity axis, the exact gravity axis is identified prior to the alignment activity. We propose a method to align the laser tracker precisely to the gravity axis using an inclination sensor and achieve the alignment accuracy of laser tracker with 10<SUP>-4</SUP> orders of magnitude in degree. If the exact gravity axis is acquired with the laser tracker, the deployment test equipment is aligned with the laser tracker. The proposed equipment has four compartments which are aligned and compensated with respect to the gravity axis; a deployment fixture, a rotation axis module, a horizontal shaft module, and the rotation axis of the solar panel. For each item, a new method for aligning with the gravity axis is proposed in this study. As a result, it is verified through test activities that the deployment test equipment is aligned with an accuracy with 10-3 orders of magnitude in degree.