http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노태호(Taeho Rho),이원복(Wonbok Lee),조원만(Wonman Cho) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
지상연소시험을 통해 이중펄스모타 성능을 입증하였다. 이중펄스를 구현하기위해 고체로켓모타 내부에 격벽형 펄스분리장치와 독립적인 점화기를 설치하였다. 주요 개발목표는 세부분으로 나뉘어진다. 첫째, 이중펄스 추진기관의 총역적은 동일형상 및 무게를 갖는 고체로켓모타에 비해 총역적이 90% 이상이어야 한다. 둘째, 1단 펄스 종료 후 1 ~ 60초 중 임의의 시간 후 2단 펄스를 점화시킬 수 있어야 한다. 마지막으로, 펄스분리장치는 1단 펄스 작동압력에서 견디며 2단 작동압력의 30% 이하에서 파열되어야 한다. 지상연소시험 결과 이러한 개발목표를 달성하는 것을 확인하였다. The ground tests of the dual pulse solid rocket motors(SRM) were performed to prove the performance of the developed dual pulse solid rocket motors. To achieve dual pulse, pulse seperation device(PSD) and independent ignition systems were installed between the 1st pulse motor and the 2nd pulse motor. The three major development goals are as follow. First, the total impulse of the dual pulse SRM must be over 90% of the single SRM which has same envelopment and weight. Second, the ignition of the 2nd pulse motor can be started at any time between 0 and 60 seconds after termination of the 1st pulse motor. Last, the rupture disk of PSD must not be broken at the 1st pulse pressure, but be broken at below 30% of the 2nd pulse operating pressure. The results of the ground tests satisfied the development goals.
권태훈(Taehoon Kwon),노태호(Taeho Rho),김병훈(Byunghun Kim),조인현(Inhyun Cho) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.11
고체 모터의 연소 중 피치, 요 축의 추력 제어를 위해 플렉시블 씰을 사용하였다. 수압시험장치는 챔버, 구동기, 카운터포텐시어미터 등을 이용한다. 압력별 구동 토크 측정 및 축방향 밀림량 측정을 수행하여 구동 성능을 평가한다. 시험 결과 플렉시블 씰의 성능은 설계 조건을 만족하며 수압시험장치가 정상적으로 작동하는 것을 확인하였다. 본 연구에서는 플렉시블 씰의 성능을 측정하기 위한 수압시험 장치의 구성, 작동 방법, 성능 검증 방법을 정리하였다. Movable nozzle with a flexible seal have been used for Thrust Vector Control of the Solid Rocket Motor. The Hydraulic Testing Machine is consisted of Chamber, Actuator, Counterpotentiometer, and evaluates performance of Flexible seal for spring torque and axial compression. The qualification test of Flexible seal was conducted on design condition. A study fix up method of formulation, operation, inspection on Hydraulic testing machine.
230mm급 고체 추진기관의 연소불안정 거동 현상 분석
권태훈(Taehoon Kwon),노태호(Taeho Rho),서혁(Hyuk Suh) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
직경 대 길이비(L/D)의 값이 큰 고체 추진기관에서는 축방향 연소불안정 현상이 발생할 가능성이 높다. 일반적으로 이러한 현상을 억제하기 위해 추진제에 금속입자를 포함시키거나 그레인 설계시 축방향 압력 진동을 억제할 수 있도록 형상을 고안한다. Slotted-Tube형 그레인을 적용한 고체 추진기관은 연소시 Slot의 영향으로 인해 축방향 압력진동이 억제되나 Slot의 길이가 짧을 경우 연소 중반이후부터 실린더부의 영향으로 축방향 압력진동이 증폭될 수 있다. 본 연구에서는 230mm급 고체 추진기관의 연소 시험 결과 중 압력에 대해 스펙트럼 분석 및 음향모드 해석을 수행하여 축방향 압력 진동 현상을 분석하였다. A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. If slot length is shot, pressure oscillation of longitudinal mode is amplified by cylinder part after middle phase of total burn time. A study has analyzed pressure oscillation of longitudinal mode at spectrum and acoustic modal analysis at pressure of result on static firing test.
국내외 Sounding Rocket 개발현황 및 발전방향
김진용(Jinyong Kim),노태호(Taeho Rho),이원복(Wonbok Lee),서혁(Hyuk Suh),이영우(Youngwoo Rhee) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
본 논문에서는 관측 장치와 송신기를 탑재하여 발사되는 관측로켓의 국내외 개발 현황에 대해 서술하였다. 국외 연구의 경우, 미국은 NASA에서 가장 활발히 진행되며 탑재량 38~680 kg을 고도 88~1500 km까지 올릴 수 있고, 현재에도 매년 20-30기의 로켓을 발사하고 있다. 유럽은 ESA을 중심으로 연구 중이고 매년 4-5기의 로켓을 발사하고 있다. 국내 연구의 경우, 고체 추진기관 KSR-Ⅰ,Ⅱ와 액체 추진기관 KSR-Ⅲ를 성공적으로 발사하였으나, 우주발사체 개발 기술은 타 산업에 비해 낙후 되어 있는 것이 현실이며 이러한 발사체 개발 분야는 적극적인 지원 및 선진 기술 습득을 통하여 활성화 시켜야할 것이다. 따라서 본 연구를 통하여 한국형 관측로켓 개발에 대한 필요성 및 발전방향을 제시하고자 한다. This paper presents development status of sounding rockets containing scientific payload and telemetry at home and abroad. The case of outside, United States is launching sounding rockets in 20-30 flights per year by the NASA program which offers to carry payload weights of 38-680 kg and altitude of 88-1500 km. Europe is launching in 4-5 flights per year by the ESA program. The case of Korean sounding rockets was successful with the launch of three times(KSR-Ⅰ,Ⅱ,Ⅲ), but Korea lags far behind the advanced countries in the field of development technologies for space launch vehicle. We expect that our scientific and industrial technologies will be improved through the research and development of sounding rockets. In this study we proposed necessity and future direction of development in domestic sounding rockets.
Fabric/EPDM계 고무의 제작 공정에 따른 삭마 특성
김진용(Jinyong Kim),노태호(Taeho Rho),이원복(Wonbok Lee),조원만(Wonman Cho),이영우(Youngwoo Rhee) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.5
격벽형 펄스분리장치를 갖는 이중펄스 로켓모타의 경우 2단 모타 추진제 연소시 1단 모타 연소실 내부에 높은 강도의 가스흐름이 발생하므로 1단 모타 연소관 내열재 설계가 중요한 변수들 중의 하나이다. 본 논문에서는 이러한 높은 강도의 가스흐름으로부터 연소실 내부를 보호하기 위하여 fabric을 삽입한 EPDM계 고무의 제작 공정을 확립하였으며 높은 강도의 가스흐름을 유발하도록 설계된 모사모타에 적용하여 삭마 특성을 분석하였다. The dual pulse rocket motor is a pressure vessel containing two pulse grains separated by a pulse separation device such as a fragile bulkhead. One of the important things in this systems is case insulation design using the excellent materials in the 1st stage pulse motor. We investigated manufacturing process of fabric/EPDM chamber insulations in order to protect the 1st stage pulse motor case with high intensity gas flow. Simulation motor connected with extension tube having FRP disc was designed to study ablation characteristics of insulation.
반안장형 Fuel Tank의 Slosh Noise 저감을 위한 유동해석 연구
김광섭(Gwangsueb Kim),노태호(Taeho Rho) 한국자동차공학회 2012 한국자동차공학회 학술대회 및 전시회 Vol.2012 No.11
Fuel sloshing in a vehicle fuel tank generates a reluctant low frequency noise, called slosh noise. To reduce slosh noise, while many approaches have used the Computational Fluid Dynamics method in a fuel tank, This paper applies the Star CCM+ . It is to find the fuel flow pattern under without baffle condition. Next, It is to analysis the fuel flow pattern using baffles. The test results showed that impact of baffles to reduction slosh noise.
이준호(Junho Lee),노태호(Taeho Rho),최성한(Sunghan Choi),서혁(Hyuk Suh) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.5
고체 추진기관 설계에는 고체 추진제 연소속도, 요구 추력, 연소관 압력, 연소시간, 탄의 직경, 길이, 무게, 최대 가속도와 같은 많은 설계요소 및 제약이 존재한다. 이러한 요소 및 제약의 최적화를 위해 내탄도/외탄도 해석을 위한 통합 설계 프로그램을 개발하였고 고체 로켓 모터의 시험을 통해 그 유용성을 확인하였다. There exist a lot of factors and restrictions for the design of solid rocket motors like burning rate, of solid propellant, demanded thrust, chamber pressure, diameter, length, weight and acceleration. For the optimization of these factors and restrictions, integrated design software for internal/external ballistic analysis was developed and verified by the performance test of solid rocket motors.