http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
용존산소 측정을 위한 평면형 Whalen-type 센서 제작 및 특성 평가
남윤경(Yoonkyung Nam),박정일(Jungil Park),박정호(Jungho Pak) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문에서는 세포의 산소 호흡량을 측정하기 위해 Whalen-type의 평면형 센서를 제안하였고, cellulose acetate (CA) 농도와 작업전극 면적에 따른 Whalen-type 센서의 특성을 분석하였다. 제안된 Whalen-type 센서는 작업전극 위에 CA 멤브레인이 코팅되어 있는 구조이고, 작업전극은 0.4 ㎜, 0.6 ㎜, 0.8 ㎜, 1.12 ㎜, 1.6 ㎜의 직경으로 설계되었다. 멤브레인 코팅에 사용된 CA는 tetrahydrofuran을 용매로 사용하여 3%, 5%, 7% 농도로 제작하고, Ti/Au를 패터닝하고 polyimide로 passivation한 유리기판 위에 CA를 스핀코팅하여 Whalen-type 센서를 제작하였다. Cyclic voltammetry를 이용하여 0.2 V~ -1.0 V 범위로 scan rate을 100 ㎷/s로 하여 0.1 M KCl 전해질에서 제작된 Whalen-type 센서의 특성을 분석하였다. 작업전극 직경이 1.6 ㎜에 코팅된 CA 농도가 3% 에서 7%로 증가함에 따라 용존산소의 환원 전류값은 2.17 ± 0.172 ㎂ (평균 ± 표준편차)에서 1.76 ± 0.194 ㎂으로 감소하였고, 다른 작업전극에서도 환원 전류값이 감소하는 경향을 보였다. 또한 CA 농도 3%가 코팅된 작업전극의 직경이 0.4 ㎜에서 1.6 ㎜로 증가함에 따라 환원 전류값이 0.17 ± 0.015 ㎂에서 2.17 ±0.172 ㎂로 선형적으로 증가하였으며, 다른 CA 농도에서도 환원 전류 값이 선형적으로 증가하였다. CA 농도 3%, 5%, 7%가 코팅된 직경 1.6 ㎜인 Whalen-type 센서에서 각각 0.6초, 1.4초 1.6초의 90% 반응시간을 보였다.
주조용 Al-Si-Cu 알루미늄 합금의 기계가공 및 주조된 표면에서의 양극산화피막 형성
문성모(Sungmo Moon),남윤경(Yoonkyung Nam),양철남(Cheolnam Yang),정용수(Yongsoo Jeong) 한국표면공학회 2009 한국표면공학회지 Vol.42 No.6
The anodic oxidation behaviour of a cast component of AC2A Al alloy with machined surface and ascast surface was investigated in sulfuric acid solution. The anodized specimen showed relatively uniform and thick anodic oxide films on the as-cast surface, while non-uniform and very thin oxide films were formed on the machined surface. Non-anodized as-cast surface was observed to be covered with thick oxide scales and showed a number of second-phase particles containing Si, while non-anodized machined surface showed no oxide scales and relatively very small number of Si particles. Thus, the very limited growth of anodic oxide films on the as-cast surface was attributed to the presence of thick oxide scales and Si-containing second-phase particles on its surface.