http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중형 유조선의 프로펠러 추력변동이 축 거동에 미치는 영향 연구
김정렬(Jeong-Ryul Kim),이재웅(Jae-ung Lee) 한국동력기계공학회 2021 동력시스템공학회지 Vol.25 No.6
The movement of the propeller shaft shows different changes in each condition, such as static, dynamic, and transient, mainly based on changes in propeller eccentricity due to changes in engine load. In general, this contributes to changing the bearing load of the shaft at the after stern tube bearing, and in severe cases causes damage to the stern tube bearing. To prevent this, various research regarding pragmatic designing on shafting system has been carried out focusing on optimize the relative inclination and retain the oil film thickness between the shaft and the stern tube bearing. However, in order to secure the integrity of the support bearing from damage, it is necessary to additionally consider dynamic conditions including transient conditions such as sudden alteration in the stern wake-field. In this context, this study cross validated the effect of propeller shaft movement during starboard turning of a medium range oil tanker at full laden draft using the strain gauge and displacement sensor. As a result of the analysis, it was confirmed that the propeller thrust fluctuation temporarily increased the load on the stern tube bearing.
김정렬(Jeong Ryul Kim),김태윤(Tae Yun Kim),노현종(Hyun Jong Nho) 한국정책학회 1998 한국정책학회보 Vol.7 No.3
올해부터 시행에 들어간 행정규제기본법은 불필요한 규제의 신설(강화)을 초기 단계에서부터 억제하고 합리적인 규제의 입안과 집행을 목적으로 규제영향분석제도를 도입하고 있다. 본고는 규제영향분석제도의 심사체계, 심사대상, 규제영향분석서 작성지침에 초점을 맞추어 우리 나라 규제영향분석제도의 성공적 정착을 위한 조건과 과제를 논구하였다. 대안 도출을 위한 일반적인 원칙과 실행전략의 개발을 위하여 OECD의 권고안을 준거로 삼아, 우리 현실을 고려하여 재해석하였다. 본고가 규제영향분석제도의 성공적 정착을 위해 제기한 조건과 과제를 요약하면 다음과 같다. 심사지침과 관련하여서는, 우선 예상 준수율에 대한 규제입안자의 판단을 분석서에 요구하는 방안을 제시하였고, 비용편익분석기법의 효과적 적용을 위한 몇 가지 방안을 제안하였다. 한편 심사체계와 관련하여서는 사전검토제 도입과 외부평가체계의 마련을 제도 성공의 조건과 과제로 제시하였다. 마지막으로 심사대상과 관련하여서는 중요규제 분류기준의 확장과 기존규제정비에 대해서도 규제영향분석을 적용할 것을 제안하였다.
유한요소법을 이용한 극저온 미니어쳐 글로브 밸브의 구조설계에 관한 연구
정호승(Ho-Seung Jeong),김영환(Young-Hwan Kim),조종래(Jong-Rae Cho),김정환(Jeong-Hwan Kim),김정렬(Jung-Ryul Kim),박재현(Jae-Hyoun Park) 한국마린엔지니어링학회 2007 한국마린엔지니어링학회지 Vol.31 No.4
This cryogenic miniature globe valve is used to transfer the liquified natural gas which temperature is -169℃, supplied pressure is 30bar(3.0㎫). In the present work the temperature distribution and thermal deformation is calculated numerical the FE method is useful to predict the thermal matter of cryogenic miniature globe valve. For this reason, to optimum design of the cryogenic miniature globe valve, the analysis of the parameter about bonnet has been studied. It‘s used 3-D modeling to analyze cryogenic globe valve, which is 1/2. Numerical study used 3-D modeling makes a decision of efficient process of product before producing in the factory. A commercial software(ANSYS 10.0) is used in the structural analysis for cryogenic globe valve.
해석 프로그램을 이용한 72W급 LED 등기구의 광분석과 열해석
고제현(Je-Hyun Ko),박재현(Jae-hyoun Park),김현종(Hyun-jong Kim),김현지(Hyun-ji Kim),김정환(Jung-hwan Kim),김범석(Bum-suk Kim),김정렬(Jeong-ryul Kim),오세준(Sea-June Oh),김진구(Jin-Gu Kim) 대한기계학회 2014 대한기계학회 춘추학술대회 Vol.2014 No.11
In recently, LED light device is used for various purposes according to the efficiency and performance of the respective accessories. Among the LED light devices using in marine are satisfied with the inadequate condition of circumstances more than that of land. For example, the tests of sea water, electromagnetic wave and explosion proof should be taken. So this study deal with the basic analysis of heat and optic on the LED light device to satisfy the KS standard.