http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
불규칙파중 다점계류중인 부유식 해양구조물의 계류력 및 운동응답특성 추정
김옥석,오우준,김도정,이경우 한국항해항만학회 2012 한국항해항만학회 학술대회논문집 Vol.2012 No.추계
본 연구는 선형이론에 기반한 상용코드를 이용하여 불규칙파중에서 다점계류중인 해양구조물의 계류력과 운동응답특성을 추정하였다. 경험적인 실험에 의존했던 방법의 병행하여 해를 갖을 필요성을 인식하지만 초기설계단계에서 계류력의 추정과 설치해역의 자연환경조건에서 해양구조물의 생명주기에 대한 추정을 하는 것은 충분한 의미를 가질 수 있다. 설치해역은 연안해역의 환경조건을 적용하였으며 해석대상은 길이 200미터, 폭 30미터 높이 10미터의 강구조물에 대해서 선정하였다. 해석결과 대형구조물의 운동응답은 계류삭과 현수선의 의존도가 높게 나타났다. 불규칙 파랑하중에 대한 종횡강도에 대한 추가연구가 필요하다.
On Flow Charactistics around Special Rudders by PIV Measurement; Flapped and Water-blowing Rudder
김옥석 해양환경안전학회 2017 海洋環境安全學會誌 Vol.23 No.2
The purpose in having a control surface on ships is to control the motion of the ship. The control surface may be composed entirely of a single movable surface or of a combination of fixed and movable portions. A control surface has one sole function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of this rotation and angle of attack then determine the manoeuvring characteristics of the ship. In this paper, two-dimensional flow characteristics of a flapped rudder and a water-blowing control rudder were accomplished respectively by PIV method in a circulating water channel. Model test has been carried out with different angles of attack of main foil (NACA 0012) and flap's deflection angles to predict the performance of the flapped rudder and the water-blowing control rudder. The 2-frame particle tracking method has been used to obtain the velocity distribution in the flow field. Re≒3.0×10⁴ has been used during the whole experiments and measured results have been compared with each other.
제어봉 부착에 따른 원형실린더 근접 후류 유동제어에 관한 실험적 연구
김옥석,이경우,Gim, Ok-Sok,Lee, Gyoung-Woo 한국항해항만학회 2008 한국항해항만학회지 Vol. No.
원형실린더에 크기가 다른 제어봉을 부착하여 2차원 단면 유통특성에 대해서 시간평균유동장을 계측하여 근접후류 제어에 관하여 PIV기법을 적용하여 연구를 수행하였다. 모델시험은 각각 크기가 다른 제어봉을 적용하였으며($d/D=0.1{\sim}d/D=0.5$) 레이놀즈수는 원형실린더의 직경을 기준으로 Re=15,000으로 적용하였다. 유동장의 속도분포론 획득하기 위해 2프레임 상호상관법을 이용하였다. 실험에 적용된 원형실린더(D=50mm)에 제어봉을 부착한 결과를 상호 비교함으로서 시간평균속도분포와 제어봉에 의한 유동제어 효과를 알 수 있었다. Flow characteristics of the control-rod-attached 2-dimensional circular cylinder was accomplished using by PIV techniques. model tests had been carried out with different diameters of control rods(d/D=0.1 through d/D=0.5). and the Reynolds number Re=15,000 based on the cylinder diameter(D=50mm) to predict the performance of the model and the two-frame grey-level cross-correlation method had been used to obtain the velocity distribution in the flow field. 50mm circular cylinder had been used during the whole experiments and measured results had been compared with each other. The measured results have been compared with each case. therefore this article identifies not only the mean velocity profiles but also the control effects of the control rods.
김옥석,오우준,이경우,손창배 한국항해항만학회 2010 한국항해항만학회지 Vol.34 No.6
A very good seakeeping vessel is able to operate effectively even in high sea states and also the passengers and the cargos are ensured in good conditions. The motions of a high speed boats are highly influenced by speed and dynamic forces even in encounter frequencies so that the assessment of seakeeping ability of the design craft in an early stage needs to be calculated for all three motions and for all ralative wave headings. In this paper, it concludes that RAO and RMS values of the catamaran’s 3 motion are calculated according as the variation of Beafort scales and ship’s speed. The ship motion response of the catamaran based on the RAO and RMS by encounter angles and speed was calculated. 내항성능이 우수한 선체는 나쁜 해상상태에서도 효과적으로 운항이 가능하고, 여객과 화물을 안정된 상태로 유지시키게 된다. 이러한 선체의 운동은 선속과 파도의 조우주파수와 밀접한 관계를 가지고 있다. 운동응답에 대한 평가는 입사파에 대하여 3자유도 운동에 대한 계산이 수행되어야 한다. 따라서 본 연구에서는 카타마란형 레저보트의 선형설계를 수행하여 이에 대한 운동성능을 고찰하고자 하였다. 조우각과 선속의 변화에 따른 카타마란의 3자유도에 대한 RAO 및 RMS 값의 반복적인 평가를 통하여 양호한 운동응답을 보였다.