http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
쿼드트리 구조와 SATD를 이용한 HEVC 인코더의 고속 인트라 예측 방식
김영조(Youngjo Kim),김재석(Jaeseok Kim) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.3
본 논문은 HEVC(high efficiency video coding) 인코더의 인코딩 시간을 줄이기 위한 고속 인트라 예측 방식을 제안한다. 제안하는 고속 인트라 예측 방식은 쿼드트리 구조와 SATD(Sum of Absolute Transformed Differences)를 사용한다. HEVC는 8×8 이상의 블록에서 SATD 값을 구하기 위해 8×8 hadamard 변환을 이용한 8×8 SATD 값을 사용한다. 제안하는 방식은 16×16 이상의 블록에서 각각의 8×8 SATD 결과를 이용해서 최적 SATD 값을 산출한다. 그 후, RDO를 위한 후보 모드의 SATD와 산출된 최적 SATD의 비교를 기반으로 후보 모드를 제거한다. 후보 모드를 제거함으로써 제안하는 방식은 RDO의 연산을 줄이고 전체 인코딩 시간을 줄이게 된다. 제안하는 방식은 8×8 블록에서는 추가로 4×4 SATD를 사용하여 최적 SATD를 구한다. 실험 결과 제안하는 방식은 거의 압축 성능 손실 없이 HM 12.1에 비해 5.33%의 인코딩 시간 감소 효과를 얻을 수 있었다. This paper proposes a fast intra prediction method to reduce encoding time for the HEVC(high-efficiency video coding) encoder. The proposed fast Intra prediction method uses quadtree structure and SATD(Sum of Absolute Transformed Differences). In HEVC, a 8×8 SATD value using 8×8 hadamard transform is used to calculate a SATD value for 8×8 or larger blocks. The proposed method calculates the best SATD value by using each 8×8 SATD result in 16×16 or larger blocks. After that, the proposed method removes a candidate mode for RDO(Rate-Distortion Optimization) based on comparing SATD of the candidate mode and the best SATD. By removing candidate modes, the proposed method reduces the operation of RDO and reduces total encoding time. In 8×8 block, the proposed method uses additional 4×4 SATD to calculat the best SATD. The experimental results show that the proposed method achieved 5.08% reduction in encoding time compared to the HEVC test model 12.1 encoder with almost no loss in compression performance.
HEVC의 Transform Skip Mode를 위한 Rough Mode Decision 알고리즘
김영조(Youngjo Kim),김재석(Jaeseok Kim) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.8
HEVC(high efficiency video coding) 표준에서 사용되는 기존의 rough mode decision(RMD) 알고리즘은 transform skip mode(TSM)와는 연관성이 낮은 DCT를 기반으로 하는 모드 선택 방법을 이용하고 있다. 따라서 기존 RMD의 결과로 구한 후보 모드가 TSM에서 사용될 때, 압축 효율이 손실되고 인코딩 시간을 낭비하게 된다. 본 논문은 HEVC에서의 TSM을 위한 새로운 RMD를 제안한다. 우리가 제안한 RMD 알고리즘은 TSM에서 최선의 모드를 선택할 확률을 높이는 새로운 비용 함수를 제안하여 코딩 효율을 향상시킨다. 또한, 제안하는 알고리즘은 새롭게 제안한 임계값을 기준으로 선택 가능성이 거의 없는TSM의 인코딩 과정을 생략하여 인코딩 시간을 줄인다. 실험 결과 제안하는 방식은 HEVC 표준에 비해서 10%의 인코딩 시간을 줄이며 스크린 콘텐츠에 대해서 0.3%의 압축률을 향상시킨다. The existing rough mode decision (RMD) algorithm, used in HEVC standard loses the coding efficiency and wastes encoding time when encoding using transform skip mode (TSM) because the RMD algorithm in HEVC uses a selection method that is designed for DCT, not for TSM. This paper proposes a new RMD algorithm for TSM in HEVC. Our proposed RMD algorithm enhances the coding efficiency by employing a new cost function to increase the probability of selecting the best intra prediction mode for TSM. In addition, it reduces the encoding time by skipping the encoding process of least feasible TSM based on a newly proposed threshold value. The experiment results show that the proposed method achieves coding gains of ?0.3% for screen contents with a 10% reduction in encoding time compared to those of the HEVC standard.
방열 특성에 따른 집광형 태양전지의 광전변환효율 변화에 관한 실험적 연구
김강호(Kangho Kim),정상현(Sang Hyun Jung),김영조(Youngjo Kim),김창주(Chang Zoo Kim),전동환(Dong Hwan Jun),신현범(Hyun-Beom Shin),이재진(Jaejin Lee),강호관(Ho Kwan Kang) 한국태양광발전학회 2014 Current Photovoltaic Research Vol.2 No.4
Under concentrated illuminations, the solar cells show higher efficiencies mainly due to an increase of the open circuit voltage. In this study, InGaP/InGaAs/Ge triple-junction solar cells have been grown by a low pressure metalorganic chemical vapor deposition. Photovoltaic characteristics of the fabricated solar cells are investigated with a class A solar simulator under concentrated illuminations from 1 to 100 suns. Ideally, the open circuit voltage should increase with the current level when maintained at the same temperature. However, the fabricated solar cells show degraded open circuit voltages under high concentrations around 100 suns. This means that the heat sink design is not optimized to keep the cell temperature at 25°C. To demonstrate the thermal degradation, changes of the device performance are investigated with different bonding conditions and heat sink materials.
InGaP/GaAs 이중접합 기반의 고효율 플렉시블 태양전지 제조기술 연구
문승필(Seungpil Moon),김영조(Youngjo Kim),김강호(Kangho Kim),김창주(Chang Zoo Kim),정상현(Sang Hyun Jung),신현범(Hyun-Beom Shin),박경호(Kyung Ho Park),박원규(Won-Kyu Park),안연식(Yeon-Shik Ahn),강호관(Ho Kwan Kang) 한국태양광발전학회 2016 Current Photovoltaic Research Vol.4 No.3
III-V compound semiconductor based thin film solar cells promise relatively higher power conversion efficiencies and better device reliability. In general, the thin film III-V solar cells are fabricated by an epitaxial lift-off process, which requires an AlxGa1-xAs (x≥0.8) sacrificial layer and an inverted solar cell structure. However, the device performance of the inversely grown solar cell could be degraded due to the different internal diffusion conditions. In this study, InGaP/GaAs double-junction solar cells are inversely grown by MOCVD on GaAs (100) substrates. The thickness of the GaAs base layer is reduced to minimize the thermal budget during the growth. A wide band gap p-AlGaAs/n-InGaP tunnel junction structure is employed to connect the two subcells with minimal electrical loss. The solar cell structures are transferred on to thin metal films formed by Au electroplating. An AlAs layer with a thickness of 20 nm is used as a sacrificial layer, which is removed by a HF:Acetone (1:1) solution during the epitaxial lift-off process. As a result, the flexible InGaP/GaAs solar cell was fabricated successfully with an efficiency of 27.79% under AM1.5G illumination. The efficiency was kept at almost the same value after bending tests of 1,000 cycles with a radius of curvature of 10 mm.
황종선(Hwang jongsun),이달형(Lee dalhyung),김영조(Kim youngjo),이상진(Lee sangjin),김재준(Kim jaejoon) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.4
1970년대부터 극저주파전자계가 인체건강에 유해한지에 대한 궁금증이 중가하고 있는 실정이다. 또한 그 시기로부터 중요한 이슈에 대한 해결방안과 향후 연구방향에 대한 지표설정을 위해 많은 연구가 행해져 왔다. 본 고에서는 세계보건기구(WHO)가 2007년 극저주파전자계와 인체건강의 관계 검토를 마무리한 공식보고서(Fact sheet No.322) 결과를 고찰해보고자 한다.