http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김동혁(Dong Hyeok Kim),금민하(Min Ha Keum),오세문(Se Moon Oh),이상훈(Sang Hoon Lee),모하마드 라키불 이슬람(Mohammad Rakibul Islam),김진상(Jin Sang Kim),조원경(Won Kyung Cho) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.10
본 논문은 유선으로 연결된 다양한 센서들의 제어와 센서들 간의 호환성을 보장하는 IEEE 1451.2 표준을 적용한 센서 네트워크 시스템 구현에 대한 연구이다. 제안된 시스템은 IEEE 1451.0에서 기술된 네트워크 수용 가능한 응용 프로세서(NCAP-Network Capable Application Processor)와 IEEE 1451.2에서 기술된 변환기 독립 인터페이스(TII-Transducer Independent Interface), 변환기 전자 데이터 시트(TEDS-Transducer Electronic Data Sheet)와 아날로그 디지털 변환기를 포함한 송수신기 부분으로 구성된다. 본 시스템은 추후 반도체 집적회로 설계에 용이할 수 있돌고 시스템의 소형화와 최적화를 목표로 구현되었다. 네트워크 수용 가능한 응용 프로세서는 개인용 컴퓨터상에서 C언어로 구현하였고 변환기 독립 인터페이스는 개인용 컴퓨터의 병렬포트와 FPGA(Field-Programmable Gate Array) 응용보드의 확장포트를 이용하였고, 송수신기는 FPGA 응용보드를 이용하여 Verilog로 구현하였다. 표준에 근거한 실험을 수행하여 제안된 구조의 검증을 수행하였다. This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.
오세문(Se-moon Oh),금민하(Min-ha Keum),김동혁(Dong-hyeok Kim),김진상(Jin-sang Kim),조원경(Won-kyung Cho) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.12A
본 논문은 최근 표준화가 완성된 IEEE 1451.5 표준을 적용한 네트워크 접속가능한 응용프로세서(NCAP: network capable application processor)와 무선 트랜듀서 접속 모듈(WTIM:wireless transducer interface module)의 구현에 대한 연구이다. PC와 무선통신 모듈로 구성되는 NCAP부와, FPGA, 센서 보드, 무선 통신모듈로 구성되는 WTIM 부로 구성된다. NCAP부의 구현에는 C++ 언어가 사용되었고 WTIM 구현에는 FPGA를 이용하여 Verilog-HDL이 사용되었으며 NCAP과 WTIM과의 무선통신은 Zigbee를 이용하였으며 Zigbee의 기능구현을 위하여 nesC를 이용하였다. 본 논문에서는 NCAP과 WTIM은 IEEE 1451.0와 IEEE 1451.5 표준을 통하여 서로 통신하도록 구현하였으며 표준에 근거하여 두 가지 실험을 실시하였다. 실험을 통하여 제안된 구조가 IEEE 1451.5 표준의 기능적인 부분을 효과적으로 수행하는 것을 검증하였다. This paper presents an implementation of the Network Capable Application Processor (NCAP) and the Wireless Transducer Interface Module (WTIM) architectures based on the new IEEE P1451.5 standard. Proposed architecture is implemented using a computer for NCAP, an FPGA board, a sensor board and two radio modules, which communicate through the ZigBee wireless communication technology between the NCAP and the WTIM based on the IEEE 1451.0 and the IEEE 1451.5 interfaces. In this paper, two experiments has been done to verify operations of proposed architecture. From the experimental results, we verify that the proposed architecture performs the wireless sensor communication functions efficiently.
이상훈(Lee Sang-Hoon),금민하(Keum Min-Ha),김진상(Kim Jinsang),조원경(Won-Kyung Cho) 한국정보기술학회 2009 한국정보기술학회논문지 Vol.7 No.1
In this paper, we propose a reconfigurable coprocessor for multimedia mobile devices. Mobile multimedia devices need to process many wireless communication signal processing kernels. Most of these signal processing kernels requires very complex computations such as vector multiplication, matrix multiplication, convolution and block based matching algorithm. The proposed architecture can perform high speed signal processing of the kernels with ability of hardware reconfiguration. Proposed architecture consist of reconfigurable computing cells and ASM (auto sequencing memory for input, output data flow). Matrix multiplication and block matching algorithm are performed for verification of the proposed architecture.