http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Improving the performance of pure sulfide Cu(InGa)S2 solar cells via injection annealing system
권일영,Nagai Takehiko,Ishizuka Shogo,Tampo Hitoshi,Shibata Hajime,김신호,김양도 한국물리학회 2021 Current Applied Physics Vol.22 No.-
In this study, we present an effective method of improving the performance of pure sulfide Cu(InGa)S2 (CIGS) solar cells via injection annealing system. The injection annealing system can perform annealing at desired temperatures, and therefore, the CIGS thin film passed over the temperature range in which secondary phases occurs. Via the injection annealing system, secondary phase InSx was effectively removed from the surface of the CIGS thin films at the temperatures over 550◦C. This resulted in the formation of good-quality P–N junction CIGS devices, thereby improving significantly the performance of the CIGS solar cell. In addition, the open-circuitvoltage (VOC) and fill factor (FF) of the CIGS devices increased gradually with increasing annealing temperature in the range of 550–640◦C. It is speculated that the bulk defects were decreased as the annealing temperature increased. Finally, via injection annealing system, a pure sulfide CIGS solar cell with an efficiency of 12.16% was achieved.
유진선 ( Jin-sun You ),권일영 ( Il-young Kwon ),박철 ( Chul Park ),양정호 ( Jung-ho Yang ),박순용 ( Soon-yong Park ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
이 기술은 CCTV 의 본연의 목적인 범죄 예방을 좀 더 효과적이고 효율적으로 하기 위해 개발하였다. 먼저 사용 공간에 제약을 줄이기 위해 와이파이 기반의 CCTV 를 사용하기로 하였다. 그리고 단순히 영상을 수집하는 것이 아니라 아래와 같은 알고리즘을 영상에 적용하여 범죄 예방을 위한 판단을 좀 더 빠르고 정확하게 할 수 있도록 하였다. 첫 번째로 배경에서 객체들을 분리한 뒤 각각의 객체들을 labeling 하여 서로를 구분하였다. 그 후 특징점을 이용해 각 객체들을 추적한 뒤 객체마다 적당한 관심영역을 설정한다. 관심영역에서 색을 이용한 외부인 침입 감지기능과 객체의 속도와 방향을 이용한 폭력적인 행동 감지기능을 적용하였다. 더 나아가 사용자의 편의를 위해 서버/클라이언트 모델을 사용하여 외부인 침입이나 폭력이 감지되면 서버가 클라이언트에게 경고 메시지와 함께 현재 상태를 이미지로 보낼 수 있도록 하였고 클라이언트가 원한다면 언제든지 실시간 영상도 볼 수 있도록 하였다.
Sol-Gel법을 이용한 Cu<sub>x</sub>Co<sub>3-x</sub>O<sub>4</sub> 산소 발생 촉매의 합성 및 전기화학 특성 분석
박유세,정창욱,김치호,구태우,석창규,권일영,김양도,Park, Yoo Sei,Jung, Changwook,Kim, Chiho,Koo, Taewoo,Seok, Changgyu,Kwon, Ilyeong,Kim, Yangdo 한국재료학회 2019 한국재료학회지 Vol.29 No.2
Transition metal oxide is widely used as a water electrolysis catalyst to substitute for a noble metal catalyst such as $IrO_2$ and $RuO_2$. In this study, the sol-gel method is used to synthesize the $Cu_xCo_{3-x}O_4$ catalyst for the oxygen evolution reaction (OER),. The CuxCo3-xO4 is synthesized at various calcination temperatures from $250^{\circ}C$ to $400^{\circ}C$ for 4 h. The $Cu_xCo_{3-x}O_4$ synthesized at $300^{\circ}C$ has a perfect spinel structure without residues of the precursor and secondary phases, such as CuO. The particle size of $Cu_xCo_{3-x}O_4$ increases with an increase in calcination temperature. Amongst all the samples studied, $Cu_xCo_{3-x}O_4$, which is synthesized at 300?, has the highest activity for the OER. Its onset potential for the OER is 370 mV and the overpotential at $10mA/cm^2$ is 438 mV. The tafel slope of $Cu_xCo_{3-x}O_4$ synthesized at $300^{\circ}C$ has a low value of 58 mV/dec. These results are mainly explained by the increase in the available active surface area of the $Cu_xCo_{3-x}O_4$ catalyst.