http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
NTC thermistor를 사용한 voltage divider 회로에서 divider resistance결정
구자훈(Ja-Hun Ku),김종대(Jong-Dae Kim),이완연(Wan-Yeon Lee),박찬영(Chan-Young Park),김유섭(Yu-Seop Kim),송혜정(Hae-Jung Song) 한국정보과학회 2010 한국정보과학회 학술발표논문집 Vol.37 No.1C
본 연구에서는 제한된 온도 영역에서 보통 정밀 온도 측정 소자로 많이 쓰이는 NTC 써미스터를 사용하여 전압 분배 회로(voltage divider circuits)를 구성하였다. 분압 저항이 온도측정 해상도에 미치는 영향을 분석하고, 회로의 분압 저항을 결정하는 방법으로서 측정하고자 하는 온도 구간의 최대 온도와 최저 온도의 NTC 써미스터 저항 값을 조화평균을 사용하여 분압 저항(divider resistance)으로 사용하였다. 선택한 분압 저항이 이상적인 저항인지에 대하여 조화평균으로 계산한 분압 저항과 대조군 저항으로 전압 분배회로를 병렬로 구성하였다. 센서들을 항온조 넣어 설정온도(50℃, 70℃, 90℃)에서 각각의 온도를 측정한 후 측정 데이터의 표준편차를 구하여 평균 온도 분해능을 비교 하는 실험을 하였다. 실험결과 측정온도 구간의 최대 온도와 최소 온도에서의 NTC 써미스터 저항 값을 조화평균으로 계산한 분압 저항 값이 대조군 저항에 비해 설정온도에서 보다 높은 평균 온도 분해능(sensing resolution)을 보였다.
구자훈(Ja-Hun Ku),김종대(Jong-Dae Kim),임호정(Ho-Jung Lim),김종원(Jongwon Kim) 한국정보기술학회 2011 한국정보기술학회논문지 Vol.9 No.8
A new PCB-based PCR chip with its efficient control system is presented. The temperature of the chip is controlled by a heater patterned on the PCB and a fan. And it is measured using the SMD (surface-mounted device) type thermistor attached onto the PCB. The chamber is constructed on the PCB with slide glass, double-sided adhesive tape, and polyethylene terephthalate film. The chip control functions and their partitioning into the host computer and the local system are qualitatively analyzed. In results, most functions can be resided in the host computer to deliver benefits such as reduction of developing period and system cost, and easy maintenance. The control system was implemented with PC as the host and the local system was connected by USB interface, obtaining superior environment in development and GUI design. The proposed system was tested for amplification of Human Papoilloma Virus DNA, and it was successfully operated.
PET/Nylon66/Clay 나노복합재료의 열적물성 및 표면특성
이민호 ( Min Ho Lee ),구자훈 ( Ja Hun Ku ),민병훈 ( Byung Hun Min ),김정호 ( Jeong Ho Kim ) 한국공업화학회 2011 공업화학 Vol.22 No.5
본 연구에서는 PET와 Nylon66의 블렌드에 몬모릴로나이트(PM) 또는 유기화제로 개질된 clay (Cloisite 25A 또는 15A)를 첨가하여 PET/Nylon66/clay 나노복합재료를 제조하였다. 나노복합재료는 용융삽입법을 이용하여 제조하였고 DSC 측정을 이용하여 분석한 결과 clay의 첨가로 인해 PET/Nylon66 블렌드의 결정화특성이 변화되는 것을 확인하였다. 특히 C25A가 PET/Nylon66 블렌드와의 상호작용이 가장 커서 결정화온도를 가장 크게 변화시키는 것으로 나타났다. 나노복합재료의 표면을 AFM으로 관찰한 결과에서도 C25A를 이용한 나노복합재료가 가장 표면의 굴곡이 적어서 상대적으로 표면이 균일한 것으로 나타났고 기계적 물성측정에서도 전반적으로 C25A를 이용한 나노복합재료가 우수한 물성을 나타내는 것으로 관찰되었다. 각 나노복합재료의 표면 극성도를 조사하기 위하여 접촉각 측정을 하였는데 유기화 정도가 클수록 표면의 접촉각이 커져서 극성이 낮아지는 것을 확인하였다. Nanocomposites of blends of polyethyleneterephthalate (PET) and polyamide66 (Nylon66) containing natural and organically modified montmorillonite clays (PM, Cloisite((R)) 25A and 15A) were prepared by melt mixing. DSC results showed that the addition of clay changed the crystallization behavior of PET/Nylon66 nanocomposites. Clay C25A was observed to most significantly change the crystallization temperature than other clays in blends of PET and Nylon66, which may be caused by the difference in interaction with matrix polymers. AFM results also showed that the lowest value of surface roughness was observed for nanocomposites containing C25A indicating the smooth and relatively homogenous surface. Mechanical properties measurement showed the similar results. Contact angle was measured to study the difference in hydrophobicity. An increase in contact angle was observed for nanocomposites with C25A or C15A due to the increased hydrophobicity.