RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        다중회귀분석을 통한 경남 지방도로 절취사면의 안정성평가

        강태승 ( Tae Seung Kang ),엄정기 ( Jeong Gi Um ) 대한지질공학회 2007 지질공학 Vol.17 No.3

        본 연구는 절리암반사면의 현장상태 및 위험도에 대한 현장조사를 기초로 사면의 상대적 위험도를 판단 할 수 있는 토대를 마련하기 위하여 개별요인이 사면안정성에 미치는 영향을 고찰하였으며 사면붕괴에 영향을 미치는 요인들에 대한 통계적 분석을 수행하였다. 사면의 붕괴요인으로는 기존에 제시된 인장균열, 지반변형, 구조물 변형, 붕괴발생규모, 절리주향, 절리경사, 절리상태, 사면경사, 강우 및 지하수위, 절취상태, 배수조건, 보호보강상태 등 12가지 항목을 고려하였다. 본 연구를 위한 조사지역은 경상남도 지방도로에 위치한 절취사면 중 붕괴 이력이 있거나 다소 불안감을 보이는 위험 절개지 233개소이다. 조사지역의 사면안정성평가는 각각의 평가요인(붕괴요인)에 따른 사면의 결함지수와 사면위험등급에 의해 수행되었다. 조사된 총 233개소의 사면 중 토사사면을 제외한 암반사면 126개소를 선별하여, 각각의 붕괴요인들과 사면위험등급과의 통계적 연관성분석을 실시하였다. 또한, 다중회귀분석을 수행하고 적용성을 고찰하여 사면결함지수와 위험등급을 예측할 수 있는 통계모형을 제시하였다. The purpose of this study is to capture the essentials in survey and evaluation scheme which are able to assess the hazard of a rock slope systematically. Statistical analysis are performed on slope instability parameters related to failure of the rock slope. As the slope instability parameters, twelve survey items are considered such as tension crack, surface deformation, deformation of retaining structures, volume of existing failures, angles between strike of discontinuity and strike of cut slope face, angles between dip of discontinuity and dip of cut slope face, discontinuity condition, cut slope angle, rainfall or ground water level, excavation condition, drainage condition, reinforcement. A total of 233 road cut slopes located in Gyeongnam were considered. The stability of the road cut slopes were evaluated by estimating the slope instability index(SII) and corresponding stability rank. 126 rock slopes were selected to analyze statistical relation between SII and slope instability parameters. The multiple regression analysis was applied to derive statistical models which are able to predict the SII and corresponding slope stability rank. Also, its applicability was explored to predict the slope failures using the variables of slope instability parameters. The results obtained in this study clearly show that the methodology given in this paper have strong capabilities to evaluate the failures of the road cut slope effectively.

      • KCI등재

        Rock Slope Stability Investigations Conducted on the Road Cut in Samrangjin-Miryang Area

        엄정기,강태승,황진연,Um Jeong-Gi,Kang Taeseung,Hwang Jin Yeon The Korean Society of Economic and Environmental G 2005 자원환경지질 Vol.38 No.3

        본 연구는 도로 절취사면에 대한 사면안정 연구로서 삼량진과 밀양을 연결하는 1022호 지방도 중 천태산 부근에 위치한 약 4km의 연속적인 절취사면에서 수행되었다. 연구지역은 유문암질 회류응회암, 강하응회암, 유문암 및 안산암 등의 백악기 화산암류로 구성되어 있으며, 거의 전 구간에 걸쳐 $70^{\circ}$이상의 사면각으로 형성된 절취암반은 높은 빈도의 불연속면을 포함하고 있다. 암반사면의 불안정 요인으로 작용하는 불연속면의 기하학적 분포특성을 파악하기 위하여 8개 지점에서 선형조사선 조사를 실시하였으며, 조사 자료에 대하여 운동학적 해석 및 블록이론해석을 적용하여 대상 도로절취사면의 안정성을 검토하였다. 각각의 선형조사선에서 조사된 개별 불연속면에 대한 중력 재하의 평면 파괴, 쐐기 파괴, 및 전도 파괴 등에 대한 최대안전사면각을 산정한 결과, 평면파괴에 대한 최대안전사면각은 대부분의 개별 불연속면에서 $65^{\circ}$이상으로 나타났으며, 쐐기파괴에 대한 최대안전사면각은 $45^{\circ}$이상으로 산정되었다. 또한, 전도파괴에 대해서는 대부분의 개별 불연속면에서 $80^{\circ}$이상으로 산정되었다. 블록이론을 적용한 결과 SL4, SL5, SL6 및 SL8 지점에 존재하는 잠재적 키블록(Type II)을 확인하였다. 블록이론에 의해 구분된 잠재적 키블록에 대하여 한계평형해석을 수행한 결과 중력재하에서는 1보다 큰 안전율이 확보되었으나 집중호우 시 나타날 수 있는 간극수압과 같은 외적 사면 불안정 요인에 따라 안전율이 크게 저하될 수 있음을 도출하였다. 또한, 한계평형해석 시 적용되는 Mohr-Coulomb 및 Barton 등의 전단강도 기준식에 따른 안전율의 변화를 제시하였다. This study addresses the preliminary results of rock slope stability analyses including hazard assessments for slope failure conducted on the selected sections of rural road cut slope which are about 4 km long. The study area is located in the Mt. Chuntae northeast of Busan and mainly composed of Cretaceous rhyolitic ash-flow tuff', fallout tuff, rhyolitc and andesite. The volcanic rock mass in the area has a number of discontinuities that produce a potentially unstable slope, as the present cut slope is more than 70 degrees in most of the slope sections. Discontinuity geometry data were collected at selected 8 scanline sections and analyzed to estimate important discontinuity geometry parameters to perform rock slope kinematic and block theory analyses. Kinematic analysis for plane sliding has resulted in maximum safe slope angles greater than $65^{\circ}$ for most of the discontinuities. For most of the wedges, maximum safe cut slope angles greater than $45^{\circ}$ were obtained. Maximum safe slope angles greater than 80" were obtained fur most of the discontinuities in the toppling case. The block theory analysis resulted in the identification of potential key blocks (type II) in the SL4, SL5, SL6 and SL8 sections. The chance of sliding taking place through a type ll block under a combined gravitational and external loading is quite high in the investigated area. The results support in-field observations of a potentially unstable slope that could become hazardous under external forces. The results obtained through limit equilibrium slope stability analyses show how a stable slope can become an unstable slope as the water pressure acting on joints increases and how a stable slope under Barton's shear strength criterion can fail as the worst case scenario of using Mohr-Coulomb criterion.

      • KCI등재

        삼량진-밀양 지역에 위치한 도로 절취사면에 대한 사면안정 연구

        엄정기(Jeong-Gi Um),강태승(Taeseung Kang),황진연(Jin Yeon Hwang) 대한자원환경지질학회 2005 자원환경지질 Vol.38 No.3

        본 연구는 도로 절취사면에 대한 사면안정 연구로서 삼량진과 밀양을 연결하는 1022호 지방도 중 천태산 부근에 위치한 약 4 km의 연속적인 절취사면에서 수행되었다. 연구지역은 유문암질 회류응회암, 강하응회암, 유문암 및 안산암 등의 백악기 화산암류로 구성되어 있으며, 거의 전 구간에 걸쳐 70 o 이상의 사면각으로 형성된 절취암반은 높은 빈도의 불연속면을 포함하고 있다. 암반사면의 불안정 요인으로 작용하는 불연속면의 기하학적 분포특성을 파악하기 위하여 8개 지점에서 선형조사선 조사를 실시하였으며, 조사 자료에 대하여 운동학적 해석 및 블록이론해석을 적용하여 대상 도로 절취사면의 안정성을 검토하였다. 각각의 선형조사선에서 조사된 개별 불연속면에 대한 중력 재하의 평면 파괴, 쐐기 파괴, 및 전도 파괴 등에 대한 최대안전사면각을 산정한 결과, 평면파괴에 대한 최대안전사면각은 대부분의 개별 불연속면 에서 65 o 이상으로 나타났으며, 쐐기파괴에 대한 최대안전사면각은 45 o 이상으로 산정되었다. 또한, 전도파괴에 대해서는 대부분의 개별 불연속면에서 80 o 이상으로 산정되었다. 블록이론을 적용한 결과 SL4, SL5, SL6 및 SL8 지점에 존재하는 잠재적 키블록(Type II)을 확인하였다. 블록이론에 의해 구분된 잠재적 키블록에 대하여 한계평형해석을 수행한 결과 중력재하에서는 1보다 큰 안전율이 확보되었으나 집중호우 시 나타날 수 있는 간극수압과 같은 외적 사면 불안정 요인에 따라 안전율이 크게 저하될 수 있음을 도출하였다. 또한, 한계평형해석 시 적용되는 Mohr-Coulomb 및 Barton 등의 전단강도 기준식에 따른 안전율의 변화를 제시하였다. This study addresses the preliminary results of rock slope stability analyses including hazard assessments for slope failure conducted on the selected sections of rural road cut slope which are about 4 km long. The study area is located in the Mt. Chuntae northeast of Busan and mainly composed of Cretaceous rhyolitic ash-flow tuff, fallout tuff, rhyolite and andesite. The volcanic rock mass in the area has a number of discontinuities that produce a potentially unstable slope, as the present cut slope is more than 70 degrees in most of the slope sections. Discontinuity geometry data were collected at selected 8 scanline sections and analyzed to estimate important discontinuity geometry parameters to perform rock slope kinematic and block theory analyses. Kinematic analysis for plane sliding has resulted in maximum safe slope angles greater than 65 o for most of the discontinuities. For most of the wedges, maximum safe cut slope angles greater than 45 o were obtained. Maximum safe slope angles greater than 80 o were obtained for most of the discontinuities in the toppling case. The block theory analysis resulted in the identification of potential key blocks (type II) in the SL4, SL5, SL6 and SL8 sections. The chance of sliding taking place through a type II block under a combined gravitational and external loading is quite high in the investigated area. The results support in-field observations of a potentially unstable slope that could become hazardous under external forces. The results obtained through limit equilibrium slope stability analyses show how a stable slope can become an unstable slope as the water pressure acting on joints increases and how a stable slope under Barton s shear strength criterion can fail as the worst case scenario of using Mohr-Coulomb c

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼