http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강현춘,강진영,류성필,김태윤,허목 유기성자원학회 2009 유기물자원화 Vol.17 No.1
Analysis of collection factor was studied to compare various parameters such as collection time, transport time, amount of collection and number of man power by on-the-spot survey at one municipal area and one rural area in Jeju-do. Results showed that the amount of man and time to collect 1 ton of waste of rural area(5.853 man・hour per time) was four times as much as that of municipal area(1.527 man・hour per time). In case of a transport time, rural area(11.08 per km/hr) has similar value to municipal area(11.07 per km/hr) and has half or one third value to the restaurant(36.7km/hr), an apartment area(33.0km/hr) and a detached area(22.4km/hr). 본 연구는 제주도의 폐기물의 수거에 소요되는 인력과 장비 및 소요시간과 수집차량의 운반속도 등의 수거 시스템을 분석하기위하여 1개 시와 1개 군을 대상으로 수거체계를 분석하고 현장조사를 실시하여 다음과 같은 결론을 얻었다. 군지역의 폐기물 1톤당 인력시간 소요량은 전체평균 5.835 인・시/톤을 보여 전체평균 1.527 인・시/톤을 나타낸 시 지역 보다 4배 정도의 인력과 시간이 소요되는 것으로 나타났다 이는 군지역이 시지역보다 지리적인 여건으로 인하여 소요 인력과 시간이 많이 필요하기 때문으로 판단된다. 운반속도에서는 군 지역과 시지역이 11.08km/시와 10.07 km/시로서 비슷한 수치를 나타내었으며 타 지역 시도의 음식업소(36.7km/시), 아파트(33.0km/시), 단독주택(22.4km/시)보다 1/2에서 1/3로 운반속도가 낮게 나타났음을 알 수 있다.
제4급 암모늄염을 이용한 과염소산 이온선택성 PVC막 전극
안형환,김용렬,강현춘,이한섭,이병철,강안수 한국막학회 1993 멤브레인 Vol.3 No.3
감응물질로 제4급 암모늄염을 사용하여 PVC를 지지체로 과염소산이온의 농도 10-6M까지 측정가능한 이온 선택성 전극을 제작하였다. 감응물질의 화학적 구조와 함량, 가소제의 종류 및 막 두께에 따른 선형응답 범위와 Nernst의 기울기 등 전극특성을 검토하여, 최적 막조건을 구한 다음 측정가능 pH범위와 여러 방해이온에 대한 선택계수를 비교 검토하였다. 과염소산 이온선택성 전극에서 감응물질의 화학적 구조 즉, 알킬기의 탄소고리수가 증가할수록 선형응답 범위 등 전극 특성은 Aliquat 336P, TOAP, TDAP 및 TDDAP의 순서로 좋아졌다. 가소제는 DBP가 가장 좋았고, 감응물질의 양은 최적 함량 이상에서 적을수록 좋았다. 최적 막 조성은 TDDAP 9.09, PVC 30.3 및 DBP 60.61wt%이었고, 막두께 0.45mm이었다. 이 조건에서 선형응답 범위 10-1~1.2 x 10-6M, 검출한계 5.1x10-7M 및 Nernst기울기 57mV/pClO4이었다. 막전위는 pH 4~11 범위에서 pH의 영향을 받지 않았으며, 선택계수 서열은 다음과 같았다. SCN->I->NO3->Br->ClO3->F->Cl->SO42 Perchlorate ion-selective PVC membrane electrode responsive to 10-6M was developed by incorporating the ion-pair complex of perchlorate with the quaternary ammonium salts as a active material. The effect of chemical structure, the content of active material, the kinds of plasticizers, and the membrane thickness on the electrode characteristics such as the linear response range and Nernstian slope of the electrode were studied. With the results, the useful pH range and the selectivity coefficients to various interfering anions were compared and investigated. It was obtained that the effect of the chemical structure of an active material on the electrode characteristics was improved with increasing the alkyl chain length of the quarternary ammonium salts in the ascending order of Aliquat 336P, TOAP, TDAP, and TDDAP. The electrode characteristics was improved with the decrease of the active material content below the optimum membrane composition, and DBP was the best as a plasticizer. The optimum membrane composition was 9.09wt% of TDDAP, 30.3wt% of PVC, and 60.6wt% of ptasticizer(DBP). And the optimum membrane thickness was0.45mm at this composition. Under the above condition, thelinear response ranger was 10-1~1.2 x 10-6M , and the detection limit was 5.1x10-7M with the Nernstian slope of 57mV/decade of activity of perchlorate ion. The electrode potential was stable within the pH range from 4 to 11. The selectivity coefficient was as shown below : SCN->I->NO3->Br->ClO3->F->Cl->SO42
광촉매 현탁식 UV/TiO₂/H₂O₂ 시스템을 이용한 제주도 매립지 침출수의 분해 제거
강현춘(Hyun Choon Kang),박용이(Yongi Park),김대영(Dae Young Kim),허목(Mok Huh) 한국환경관리학회 2006 環境管理學會誌 Vol.12 No.3
기존 수처리기술로는 처리가 어려운 난분해성 유기물질이 다량 존재하는 제주도의 매립지 침출수를 광촉매와 과산화수소를 결합한 UV/TiO₂/H₂O₂ system으로 분해 제거하였다. 실험에 사용된 폐수는 제주도내에 위치한 위생매립장에서 발생한 원수를 사용하였으며 매립 후 4년에서 5년이 지난 시료로서 하루발생량은 400~500 ㎥이었으며 채취한 시료는 20 ℓ 용기에 가득 담아 teflon tape로 밀봉하고 실험실로 운반하였으며 광촉매반응기는 용량 2L의 원형 Pyrex 재질의 회분식 반응기이며 UV lamp의 오염을 차단하면서 동시에 원하는 자외선 파장을 적절히 투과시키고자 석영관 및 Pyrex관에 Lamp를 넣어 반응기 중앙부에 장착하였다. 광촉매인 TiO₂ 분말은 anatage형(Degussa P-25)을 사용하였으며 과산화수소 등 기타 시약은 특급으로 정제없이 사용하였다. 반응시스템은 기존의 광촉매 고정화기술을 이용한 시스템이 아닌 광촉매를 현탁시킨 상태로 반응을 시켜서 폐수의 흐름과 함께 광촉매가 함께 반응하므로 더 많은 UV가 조사될 수 있도록 하였다. pH는 0.1N NaOH와 0.1N H₂SO₄로 조절하여 사용하였으며 총 반응시간은 1시간으로 분석시료는 일정한 간격으로 반응기의 상층부에서 매회 40m ℓ씩 채취하여 광촉매의 농도, H₂O₂의 농도, pH 등의 조건변화를 주면서 제거효율의 변화를 확인하였다. UV/TiO₂의 경우 촉매량이 증가할수록 분해효율이 증가함을 알 수 있었다. 제거효율을 향상시키기 위한 산화제로서 과산화수소를 사용하는 경우 H₂O₂의 양이 증가할수록 제거율이 증가함을 알 수 있으며 UV/TiO₂의 경우와는 달리 색도의 제거율이 COD와 SS 보다 월등히 높아 2000ppm인 경우 52%의 제거율을 나타내었다. UV/TiO₂, UV/H₂O₂, UV/TiO₂/H₂O₂의 분해제거효율을 직접적으로 비교한 결과 과산화수소와 TiO₂를 동시에 투입한 경우 각각의 경우보다 제거율이 크게 상승한 것을 알 수 있었다. 이는 산화력 증가에 영향을 미치는 광촉매와 산화제가 동시에 작용함으로써 제거효율 상승에 영향을 미치는 것으로 생각되어지며 또한 침출수의 분해과정에서 분해반응에 필요한 hydroxyl radical의 생성에 있어서 UV/TiO₂/H₂O₂ 시스템이 가장 다양한 경로를 제공하였기 때문으로 판단된다. 시간에 대한 분해율의 경우에 초기 10분, 20분에 급격히 농도가 감소하여 지수함수 적으로 감소하는 경향을 나타내었으며 모든 경우에 있어서 COD, SS, 색도의 제거효율은 색도 > SS > COD 순으로 나타났다. The decomposition of Jeju landfill leachate using UV/TiO₂/H₂O₂ of Photocatalytic Suspension Method was studied. In the case of UV/TiO₂, UV/H₂O₂ and UV/TiO₂/H₂O₂, decomposition efficiency was increased as concentration of TiO₂ and H₂O₂ increased, Also, Color concentration was much higher than the COD and SS concentration and revealed 52% decomposition efficiency in case of 2000ppm. Comparison of UV/TiO₂, UV/H₂O₂ and UV/TiO₂/H₂O₂ showed that decomposition efficiency of UV/TiO₂/H₂O₂ reaction was much higher than the UV/TiO₂, UV/H₂O₂ reaction. This was because the system of UV/TiO₂/H₂O₂ gives diverse pathway in hydroxyl radical generation and photocatalyst and oxidants effecting increase of oxidizing influences decomposition efficiency increment.