http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Park, Honghwi,Lim, Changhee,Lee, Chang-Ju,Kang, Jaewoon,Kim, Jaeeuk,Choi, Muhan,Park, Hongsik IOP 2018 Nanotechnology Vol.29 No.41
<P>Graphene grown on a copper (Cu) substrate by chemical vapor deposition (CVD) is typically required to be transferred to another substrate for the fabrication of various electrical devices. PMMA-mediated wet process is the most widely used method for CVD-graphene-transfer. However, PMMA residue and wrinkles that inevitably remain on the graphene surface during the transfer process are critical issues degrading the electrical properties of graphene. In this paper, we report on a PMMA-mediated graphene-transfer method that can effectively reduce the density and size of the PMMA residue and the height of wrinkles on the transferred graphene layer. We found out that acetic acid is the most effective PMMA stripper among the typically used solutions to remove the PMMA residue. In addition, we observed that an optimized annealing process can reduce the height of the wrinkles on the transferred graphene layer without degrading the graphene quality. The effects of the suggested wet transfer process were also investigated by evaluating the electrical properties of field-effect transistors fabricated on the transferred graphene layer. The results of this work will contribute to the development of fabrication processes for high-quality graphene devices, given that the transfer of graphene from the Cu substrate is essential process to the application of CVD-graphene.</P>
신민환 ( Minhwan Shin ),이재운 ( Jaewoon Lee ),전태완 ( Taewan Jeon ),임경재 ( Kyoungjae Lim ),최중대 ( Joongdae Choi ) 한국농공학회 2010 한국농공학회 학술대회초록집 Vol.2010 No.-
정부는 오염총량관리계획을 수립하여 하천의 수질을 개선하기 위해 노력하고 있다. 오염총량관리에서 기준으로 하는 기준유량은 BOD 항목의 경우 과거 10년간 평균 저수량을 기준으로 하고, 2단계 기본계획에 추가된 T-P 항목의 경우는 과거 10년간 평균 저수량 및 과거 10년간 평균 평수량을 기준으로 하고 있다. 이는 총량제에서 기준으로 하는 유량은 오염원에서 발생하는 기저유출량만을 고려하여 산정하는 것이다. 그러나 환경부에서 산정하는 비점오염원 원단위의 경우 강우로 인해 발생하는 직접유출량을 고려하여 오염원을 분석하고 원단위를 산정한다. 이는 강우에 의해 발생하는 수질항목의 농도가 높을 경우 과다한 산정이 될 수 있다. 유역면적이 작거나 도시와 같은 불투수층 유역, 그리고 상시유출이 없는 밭이나 논 같은 경우에 적용할 경우에는 문제가 발생하지 않는다. 그러나 산림지역과 같이 강우로 인해 유출이 지속적으로 발생하는 지목에서는 문제가 된다. 따라서 산림과 같이 지속적으로 유출이 발생하는 지목은 강우가 발생한 시점을 기준으로 원단위를 산정하는 것이 아니라 연간 발생하는 유출량과 수질 분석을 통해 원단위를 산정하여야 한다. 따라서 본 연구에서는 강우가 발생하는 시기에는 5분간격의 유량을 측정하고, 15분∼4시간 간격으로 수질을 분석하였고, 비강우시에는 유량은 5분간격으로 측정하고, 수질분석은 1주일에 1회 분석하여 연간발생하는 오염부하를 산정하였다. 이는 강우에 의해 발생하는 직접유출만을 고려하는 것이 아니라, 기저유출로 발생하는 부분까지 고려하여 원단위를 산정한다.
이경숙 ( Kyoungsook Lee ),윤광식 ( Kwangsik Yoon ),정재운 ( Jaewoon Jung ),최동호 ( Dongho Choi ),최우정 ( Woojung Choi ),임상선 ( Sangsun Lim ),최강원 ( Gangwon Choi ) 한국농공학회 2011 한국농공학회 학술대회초록집 Vol.2011 No.-
논의 경우 벼 재배기간 중 주로 담수상태에 있고 벼가 자라면서 Canopy를 형성하여 다른 지목과는 오염물질의 유출 특성이 다르다. 다른 오염물질에 비해 순수 논에서의 SS 유출에 관한 연구가 부족한 실정이다. 따라서 SS 유출과 관련성이 높은 인자들 사이의 상관성 분석을 통해 SS유출에 가장 영향을 미치는 인자가 무엇인지 파악하는 것이 필요하다. 영산강 수계중 하나인 전라남도 함평군에 위치한 학야지구 논 유역을 대상으로 2006년부터 2010년까지의 장기간 모니터링한 자료를 바탕으로, SS유출에 영향을 미치는 인자들인 강우량, 강우강도, 강우+관개량, 관개량, 배수량과 농도 또는 부하량 사이의 상관성을 강우사상별과 영농기간으로 구분하여 분석하였다. 영농기간 동안의 총강우량과 SS 부하량 사이는 선형관계를 보이지 않았고, 관개량과 부하량 사이는 높은 상관성을 나타내어 부하량은 강수량보다는 관개량과 상관성이 있음을 알 수 있었다.
최동호 ( Dongho Choi ),윤광식 ( Kwangsik Yoon ),정재운 ( Jaewoon Jung ),이경숙 ( Kyungsook Lee ),최우정 ( Woojung Choi ),임상선 ( Sangsun Lim ),임병진 ( Byungjin Lim ),최강원 ( Gangwon Choi ) 한국농공학회 2011 한국농공학회 학술대회초록집 Vol.2011 No.-
SWAT 모형은 장기 수문순환 과정을 모의하여 토양, 토지, 농업관리 등 유역관리를 위한 의사결정 방향을 제시하고, 유역의 장기유출 및 수질 모의에 많이 이용되고 있어 우리나라에서 현재 시행중인 수질오염총량관리제의 기준유량 및 유역내 오염물질 거동 해석에 많은 활용이 예상된다. 논유역을 대상으로 SWAT 모형을 적용하기 위해서 전라남도 함평군 엄다면 화양리의 논 지구를 대상으로 2005년부터 2010년까지 영농 기간동안 집중 모니터링을 실시하였다. SWAT 모형을 구동하기 위해서 수치고도모형(DEM), 토지피복도, 토양도, 하천도를 구축하였다. 논 유역을 대상으로 SWAT 모형을 적용하기 위해서 이앙시기, 시비시기, 관개량 등을 조사하여 입력자료를 구축하였으며, 유출곡선지수, 유효토층, 토양침식 및 SS 모의발생을 위해 ULSE_K, 평균경사길이(SLSUBBSN), 평균경사(Slope), 경운인자 등을 조절하여 적용한 결과 2005~2010년까지 실측 유출량과 모의발생 유출량은 서로 유사하였다. 하지만 강우와 관개수에 토양이 포화되어 탈질로 대부분의 질소가 손실되며 지표수 유출손실은 작은 것으로 모의 발생되었다. 따라서 토층 깊이를 제한하여 관측치를 재현하였다. 따라서 대규모 논 유역에 SWAT모형을 적용하기 위해서는 토양 입력자료를 조정하여야 되는 것으로 나타났다.
The Effects of The Salt on Chitosan Bioink for 3D Bioprinting
( Jongbeom Ku ),( Kyoung-je Jang ),( Myungchul Lee ),( Jaewoon Lim ),( Sangbae Park ),( Jong Hoon Chung ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1
In the tissue engineering and regenerative medicine, fabricating of the 3D structures using biomaterials is one of the main research field. Generally, gel beads, freeze-dried scaffolds and electrospun matrices are the simple 3D constructions from biomaterials. However, these structures have limited thickness and difficult to control of their structures. In addition, cells on these 3D structures are randomly distributed and the number of cells is uncontrollable. On the other hand, 3D bioprinting technology that can fabricate complex 3D architectures under precision control condition which include control of cell distribution, more high-resolution and biomimicry. During the bioprinting, cells is under a high shear-stressed environment process. Therefore, bioprinting process must be cytocompatible. This problem make it difficult to the choice of materials because the materials are need to be an aqueous or aqueous gel condition. To overcome this limitation, previous researches were introduced some methods, including photopolymerized(Murphy & Atala, 2014), or temperature assisted sol-to-gel transition allow hydrogels to retain their form during the printing process(Zhu et al., 2016). Most of all, thermosensitive hydrogels can physically crosslinked without crosslinking agent that can overcome the problem in cell viability and cytotoxicity. Chitosan, which has non-toxic, biocompatible and biodegradable polysaccharide, can be used as thermosensitive hydrogels. When the preparing chitosan thermosensitive hydrogels, salts are the key factors for sol-gel transition and hydrogel characteristics. Yet, there is no study to investigate the comparison among these salts for bioink(Zhou, Jiang, Cao, Li, & Chen, 2015). Therefore, the purpose of this study was to compare chitosan bioinks characteristics by salts for 3D bioprinting.
최동호 ( Dongho Choi ),윤광식 ( Kwangsik Yoon ),정재운 ( Jaewoon Jung ),이경숙 ( Kyungsook Lee ),최우정 ( Woojung Choi ),임상선 ( Sangsun Lim ),임병진 ( Byungjin Lim ),최강원 ( Gangwon Choi ) 한국농공학회 2011 한국농공학회 학술대회초록집 Vol.2011 No.-
우리나라는 수질개선하기위해서 1차 오염총량관리기간동안 BOD를 관리대상 물질로 선정하여 시행되어 왔으며, 2차 오염관리대상물질로 T-P를 선정하여 관리하고 있다. 박재홍 등(2006)은 1차 오염총량관리 기간동안 모든 수계가 동일한 관리대상물질을 선정하고 적용하는 것에 있어 유역별 오염원 및 지리적 특성이 다르기 때문에 수질관리에 있어서 적절한 차별화된 대상물질의 선정도 고려되야 한다고 하였다. 따라서 하천 및 호소의 수질을 효율적으로 관리하기 위해서는 관리대상 수질항목의 분포형태 파악이 매우 중요하다. 자료의 분포형태는 확률지를 사용하는 방법과 적합도 검정을 하는 방법으로 파악할 수 있으며, 수질항목의 확률분포는 해석해 또는 수치해로 구성된 결정론적 모델과 연계하여 모의 결과의 불확실성 및 신뢰성 등 지표수 수질관리에 효율적으로 사용될 수 있다. 논 유출수의 COD, SS, T-N, T-P의 확률 분포 특성을 분석하기 위해 전라남도 함평군 엄다면 화양리 논 지구에서 2008년부터 2010년까지 영농 기간동안 집중 모니터링을 실시하였으며, 수질항목별 분포형태는 Kolmogorov-Smirnov(K-S) 적합도 검증방법을 사용하였다. COD와 SS는 Normal, Log-Normal, Gamma, Weibull 분포모형에서 적합성을 보였으며, T-N의 경우 Log-Normal, Gamma, Weibull 분포모형에서 적합도를 보였으며, T-P의 경우 Log-Normal 분포에서만 적합성이 있는 것으로 나타났다.
Delivery of Anticancer Drug Using Electrospray System
( Myungchul Lee ),( Kyoung-je Jang ),( Sang Bae Park ),( Jaewoon Lim ),( Hyun-mok Son ),( Jae Eun Kim ),( Jong Hoon Chung ) 한국농업기계학회 2019 한국농업기계학회 학술발표논문집 Vol.24 No.2
Cisplatin, a representative anti-cancer drug used to treat cancer, has many side effects. In particular, it causes great damage to the kidneys. Thus, many researcher have studied to deliver a drug with side effect such as cisplatin to cancer area using targeted drug delivery system. Here we propose a novel way to deliver drugs directly to the tumor site. That is another application of electrospray methods. We discovered optimal conditions to promote the introduction of cisplatin into cancer cells. The group of electrospray with cisplatin at 8 kV led to the necrosis of cells about 1.5 times more likely than the group of treated cisplatin alone. Thus, we propose a new way to treat cancer by delivering anticancer drug directly to the tumor site using this electrospray technique.