하악 무치악 부위의 임플란트 이식을 위한 전산화단층촬영 영상의 비교 평가

선경훈,정호걸,박혁,박창서,김기덕 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.1

Purpose : The purpose of this study was to evaluate the clinical usefulness of the recently developed multi-detector computed tomography and cone beam computed tomography in pre-operative implant evaluation, by comparing them with the single detector computed tomography, already confirmed for accuracy in this area. Materials and Methods : Five partially edentulous dry human mandibles, with 1×1 mm gutta percha cones, placed in 5 mm intervals posterior to the mental foramen on each side of the buccal part of the mandible, were used in this study. They were scanned as follows: 1) Single detector computed tomography: slice thickness 1 mm, 200 mA, 120 kV 2) Multi-detector computed tomography: slice thickness 0.75 mm, 250 mA, 120 kV 3) Cone beam computed tomography: 15 mAs, 120 kV Axial images acquired from three computed tomographies were transferred to personal computer, and then reformatted cross-sectional images were generated using V-Implant 2.0 (CyberMed Inc., Seoul, Korea) software. Among the cross-sectional images of the gutta percha cone, placed in the buccal body of the mandible, the most precise cross section was selected as the measuring point and the distance from the most superior border of the mandibular canal to the alveolar crest was measured and analyzed 10 times by a dentist. Results : There were no significant intraobserver differences in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). There were no significant differences among single detector computed tomography, multi-detector computed tomography and cone beam computed tomography in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). Conclusion : Multi-detector computed tomography and cone beam computed tomography are clinically useful in the evaluation of pre-operative site for mandibular dental implants, with consideration for radiation exposure dose and scanning time.

Cone beam형 전산화단층영상에서 골의 형태와 밀도의 평가

홍상우,김규태,최용석,황의환 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.1

Purpose : Diagnostic estimation of destruction and formation of bone has the typical limit according to capacity of x-ray generator and image detector. So the aim of this study was to find out how much it can reproduce the shape and the density of bone in the case of using recently developed dental type of cone beam computed tomography, and which image is applied by new detector and mathematic calculation. Materials and Methods : Cone beam computed tomography (PSR 9000N, Asahi Roentgen Ind. Co., Ltd., Japan) and soft x-ray radiography were executed on dry mandible that was already decalcified during 5 hours, 10 hours, 15 hours, 20 hours, and 25 hours. Estimating and comparing of those came to the following results. Results : The change of inferior border of mandible and anterior border of ramus in the region of cortical bone was observed between first 5 and 10 hours of decalcification. The reproduction of shape and density in the region of cortical bone and cancellous bone can be hardly observed at cone beam computed tomography compared with soft x-ray radiography. The difference of decrease of bone density according to hours of decalcification increase wasn’t reproduced at cone beam computed tomography compared with soft x-ray radiography. Conclusion : CBCT images revealed higher spatial resolution. However, contrast resolution in region of low contrast sensitivity is the inferiority of images’ property.

골결손부 치유과정에서 cone beam형 전산화단층영상의 정확도

강호덕,김규태,최용석,황의환 대한구강악안면방사선학회 2007 Imaging Science in Dentistry Vol.37 No.2

Purpose : To evaluate the accuracy of the imaging reformation of cone beam computed tomography for the assessment of bone defect healing in rat model. Materials and Methods : Sprague-Dawley strain rats weighing about 350 gms were selected. Then critical size bone defects were done at parietal bone with implantation of collagen sponge. The rats were divided into seven groups of 3 days, 1 week, 2 weeks, 3 weeks, 4 weeks, 6 weeks, and 8 weeks. The healing of surgical defect was assessed by multiplanar reconstruction (MPR) images and three-dimensional (3-D) images of cone beam computed tomography, compared with soft X-ray radiograph and histopathologic examination. Results : MPR images and 3-D images showed similar reformation of the healing amount at 3 days, 1 week, 2 weeks, and 8 weeks, however, lower reformation at 3 weeks, 4 weeks, and 6 weeks. According to imaging-based methodologies, MPR image revealed similar reformation of the healing amount than 3-D images compare with soft X-ray image. Among the four threshold values for 3-D images, 400-500 HU revealed similar reformation of the healing amount. Histopathologic examination confirmed the newly formed trabeculation correspond with imagingbased methologies. Conclusion : MPR images revealed higher accuracy of the imaging reformation of cone beam computed tomography and cone beam computed tomography is a clinically useful diagnostic tool for the assessment of bone defect healing.

하악 제3대구치와 하악관과의 위치관계에 대한 파노라마 방사선사진과 cone beam형 전산화단층영상의 비교

최형수,김규태,최용석,황의환 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.3

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-9000 Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by χ²-test. Results : 1. There was no statistical significance according to 3 types (type l, type ll, type lll) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

방사선치료용 선형가속기를 이용한 Gated Cone-Beam CT의 유용성 연구

서정민(Seo, Jeong-Min),김찬형(Kim, Chan-Hyeong),박병석(Park, Byoung-Suk),박철수(Park, Cheol-Soo),장현철(Jang, Hyon-Chol),김정대(Kim, Joung-Dae) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.10

환자의 호흡은 방사선치료에서 중요한 인자로 작용한다. 종양을 치료하는 방사선 치료용 선형가속기에서 시행하는 기존의 cone-beam CT에서는 호흡에 의한 움직임이 반영되지 않아 영상에 왜곡이 발생하여 정확하지 못한 영상 정보를 획득 하였다. 본 연구는 호흡에 의한 움직임을 고려하고 특정 순간을 포착한 gating을 적용하여 획득한 back projection 영상을 이용 하여 cone-beam CT 영상으로 재구성하였으며 기존의 방법과 비교하였다. 기존의 방법은 영상 왜곡도가 400%에 달하였으나, 본 연구에서 시행한 gating을 적용한 cone-beam CT는 약 2%에 불과하였다. 이에 본 연구는 호흡의 움직임을 반영한 영상유도 방사선치료의 방향과 평가 방법을 제시하였다. The respiration is one of important factor in the radiation therapy. The existing commercial method of cone-beam computed tomography on LINAC does not consider respiratory motion of patient hence the images are both distorted and inaccurate. In this study, the cone-beam computed tomography images have been reconstructed from back projection radiography of specific phase on breathing cycle which concerned about respiratory movement in radiation therapy. This study investigated how different between cone-beam CT images with and without gating respiratory movement, and this paper provides that guide and implementation of gated cone-beam CT on radiation therapeutic equipment.

Reliability of panoramic radiography in predicting proximity of third molars to the mandibular canal: A comparison using cone-beam computed tomography

Nunes, Willy James Porto,Vieira, Aline Lisboa,de Abreu Guimaraes, Leticia Drumond,de Alcantara, Carlos Eduardo Pinto,Verner, Francielle Silvestre,de Carvalho, Matheus Furtado Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.1

Purpose: The purpose of this study was to analyze the reliability of 7 panoramic radiographic signs for predicting proximity of the root apices of mandibular third molars to the mandibular canal using cone-beam computed tomography and to correlate these findings with the Pell and Gregory and the Winter classification systems. Materials and Methods: An observational, cross-sectional, descriptive study was conducted on 74 patients with bilateral impacted mandibular third molars. Four panoramic radiographic signs were observed in the tooth root (darkening, deflection, and narrowing of the root apices, and bifid apices), and another 3 in the mandibular canal (diversion, narrowing, and interruption of the mandibular canal). Cone-beam computed tomography images were analyzed to identify disruption and diversion of the mandibular canal and root deflection. Results: Binary logistic regression showed that only 4 of the 7 panoramic radiographic signs were able to predict proximity of the root apices of the mandibular third molars to the mandibular canal: darkening of the root, deflection of the root, narrowing of the root, and interruption of the mandibular canal(P<0.05). Conclusion: Darkening, deflection, and narrowing of the root, in tandem with the interruption of the mandibular canal on panoramic radiographs, indicate that cone-beam computed tomography should be performed when planning the extraction of impacted mandibular third molars. Proximity between mandibular third molars and the mandibular canal is correlated with the Winter classification.

Maxillary antroliths detected by cone-beam computed tomography in an adult dental population

조봉혜,정연화,황재준 대한영상치의학회 2019 Imaging Science in Dentistry Vol.49 No.1

Purpose: This study evaluated the prevalence and characteristics of maxillary antroliths using cone-beam computed tomography (CBCT) scans performed for maxillofacial diagnostic purposes. Materials and Methods: CBCT scans of 13,946 patients over the age of 20 were reviewed for maxillary antroliths, and prevalence according to sex, age, and the side of the jaw was calculated. The relationships of single or multiple antroliths with sex, side, and the degree of sinus inflammation were evaluated. The shape and dimension of antroliths were also assessed. The data were analyzed using descriptive statistics, the chi-square or Fisher exact tests, and Kendall’s tau-b. Results: A total of 138 (0.99%) of the 13,946 patients showed an antrolith in at least 1 sinus. Only 18 patients presented a bilateral manifestation, which brought the total number of sinuses containing an antrolith to 156 (0.56%). Multiple antroliths were observed in 36 sinuses, and the total number of antroliths was 207: 110 punctate, 65 linear, and 32 amorphous. The antrolith dimensions varied from 1 mm2 to 91 mm2 (average, 10.2±15.5 mm2). No statistically significant differences were found according to sex, side, and age group (P>0.05). However, there was a statistically significant difference between the multiplicity of antrolith and the degree of sinus inflammation (P<0.05). Conclusion: Cone-beam computed tomography is an effective modality for the detection of incidental antroliths. Maxillary antroliths were found to be very rare and were usually asymptomatic. Dentists should have a comprehensive understanding of their diagnosis and treatment in light of possible associated dental problems.

Maxillary antroliths detected by cone-beam computed tomography in an adult dental population

Cho, Bong-Hae,Jung, Yun-Hoa,Hwang, Jae-Joon Korean Academy of Oral and Maxillofacial Radiology 2019 Imaging Science in Dentistry Vol.49 No.1

Purpose: This study evaluated the prevalence and characteristics of maxillary antroliths using cone-beam computed tomography (CBCT) scans performed for maxillofacial diagnostic purposes. Materials and Methods: CBCT scans of 13,946 patients over the age of 20 were reviewed for maxillary antroliths, and prevalence according to sex, age, and the side of the jaw was calculated. The relationships of single or multiple antroliths with sex, side, and the degree of sinus inflammation were evaluated. The shape and dimension of antroliths were also assessed. The data were analyzed using descriptive statistics, the chi-square or Fisher exact tests, and Kendall's tau-b. Results: A total of 138 (0.99%) of the 13,946 patients showed an antrolith in at least 1 sinus. Only 18 patients presented a bilateral manifestation, which brought the total number of sinuses containing an antrolith to 156 (0.56%). Multiple antroliths were observed in 36 sinuses, and the total number of antroliths was 207: 110 punctate, 65 linear, and 32 amorphous. The antrolith dimensions varied from $1mm^2$ to $91mm^2$ (average, $10.2{\pm}15.5mm^2$). No statistically significant differences were found according to sex, side, and age group (P>0.05). However, there was a statistically significant difference between the multiplicity of antrolith and the degree of sinus inflammation (P<0.05). Conclusion: Cone-beam computed tomography is an effective modality for the detection of incidental antroliths. Maxillary antroliths were found to be very rare and were usually asymptomatic. Dentists should have a comprehensive understanding of their diagnosis and treatment in light of possible associated dental problems.

Comparison of cone-beam computed tomography and panoramic radiography in the evaluation of maxillary sinus pathology related to maxillary posterior teeth: Do apical lesions increase the risk of maxillary sinus pathology?

Terlemez, Arslan,Tassoker, Melek,Kizilcakaya, Makbule,Gulec, Melike Korean Academy of Oral and Maxillofacial Radiology 2019 Imaging Science in Dentistry Vol.49 No.2

Purpose: The aims of this study were first, to compare panoramic radiography with cone-beam computed tomography (CBCT) for evaluating topographic relationships, such as the classification of maxillary posterior teeth and their distance to the maxillary sinus floor; and second, to determine the relationship between maxillary sinus pathology and the presence of apical lesions. Materials and Methods: In total, 285 paired CBCT and panoramic radiography records of patients (570 maxillary sinuses) were retrospectively analyzed. Both imaging modalities were used to determine the topographic relationship of the maxillary posterior teeth to the sinus floor. Mucosal thickening >2 mm was considered a pathological state. Data were analyzed using the chi-square, Wilcoxon, and Mann-Whitney U tests. Odds ratios (ORs) and confidence intervals(CIs) were calculated. Results: The closest vertical distance measurements made between posterior maxillary teeth roots and the maxillary sinus on panoramic radiography and CBCT scans showed statistically significant differences from each other(P<0.05). Compared to panoramic radiography, CBCT showed higher mean values for the distance between the maxillary sinus floor and maxillary posterior teeth roots. The CBCT images showed that at least 1 apical lesion adjacent to the right maxillary sinus increased the risk of maxillary sinus pathology by 2.37 times(OR, 2.37; 95% CI, 1.58-3.55, P<0.05). Conclusion: Panoramic radiography might lead to unreliable diagnoses when evaluating the distance between the sinus floor and posterior roots of the maxillary teeth. Periapical lesions anatomically associated with maxillary sinuses were a risk factor for sinus mucosal thickening.

A cone-beam computed tomography study of the prevalence and location of the second mesiobuccal root canal in maxillary molars

Lee Seong-Ju,Lee Eun-Hye,Park Se-Hee,Cho Kyung-Mo,Kim Jin-Woo 대한치과보존학회 2020 Restorative Dentistry & Endodontics Vol.45 No.4

Objectives: This study aimed to investigate the incidence and location of the second mesiobuccal root (MB2) canal in maxillary molars with the aid of various measuring points and lines using cone-beam computed tomography (CT). Materials and Methods: A total of 205 images of patients who underwent cone-beam CT examinations between 2011 and 2015 as part of their dental diagnosis and treatment were included. There were 76 images of the maxillary first molar and 135 images of the maxillary second molar. Canal orifices were detected at −1 mm from the top of the pulpal floor on cone-beam CT images. Image assessment was performed by 2 observers in reformatted image planes using software. Assessments included measurement of the distance between the MB1 and MB2 canals, and the angles between the lines connecting the MB1-MB2 and distobuccal (DB)-palatal (P) canals. The data were analyzed using the student's t-test. Results: The prevalence of the MB2 canal was 86.8% in the first molar and 28.9% in the second molar. The angle between the lines connecting the MB1-MB2 and DB-P canals was 2.3° ± 5.7° in the first molar and −3.95° ± 7.73° in the second molar. The distance between the MB1 and MB2 canals was 2.1 ± 0.44 mm in the first molar and 1.98 ± 0.42 mm in the second molar. Conclusions: The angles between the lines connecting the MB1-MB2 and DB-P canals was almost parallel. These findings may aid in the prediction of the location of the MB2 canal orifice.