http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한운우,유병승 大田大學校 環境問題硏究所 1996 환경문제연구소 논문집 Vol.1 No.-
To determine the best condition of waste water treatment containing polyvinyl alcohol(P.V.A) through the recovery PVA equipment, several coagulants were tested. Coupled treatment of borax and sodium sulfate turned out to be the best coagulant. The recovery rate of remnant PVA with the treament was not affected by pH changes and temperature ranges tested, but increased by the polimerization of used PVA. The recovery rate and viscosity of remnant PVA were increased by repeated recovery process. These results may provide economical benifits by recovering the precious industrial materials from wastewater and be applicable to design the equipments recovering the environmental contaminants.
한국에서 연노랑허리솔새(Phylloscopus yunnanensis)의 첫 포획 기록
최유성(Yu-Seong Choi),김동원(Dong-Won Kim),정유진(Eujin Cheong),이현정(Hyun-Jeong Lee),백승운(Seung-Woon Paik),손종성(Jong-Seong Son),이윤선(Yun Sun Lee),남형규(Hyung-Kyu Nam) 한국조류학회 2021 한국조류학회지 Vol.28 No.2
2021년 10월 22일 인천 옹진군 소청도에서 연노랑허리솔새(Phylloscopus yunnanensis) 1개체가 포획되었으며, 이번 기록은 국내 첫 번째 포획 기록이며 유전적 방법으로 확인된 본 종의 첫 번째 확증 기록이다. 외형적으로 노랑허리솔새(P. proregulus)와 매우 유사하지만, 머리중앙선 앞 부분이 흐리고, 옅은 눈썹선, 둘째날개깃 기부의 반점이 없는 점으로 구분된다. 외부측정치는 노랑허리솔새와 큰 차이가 없지만, 익식은 차이가 있었다. 본 기록은 국내 도래에 대한 명확한 근거가 부족한 솔새과 조류 1종에 대한 포획과 측정 자료를 제공함으로써 국내 생물종 확보 및 생물다양성 증진에 기여하며, 향후 야외에서 본 종에 대한 형태적 동정에 필요한 정보를 제공하는데 의의가 있다. A Chinese Leaf Warbler (Phylloscopus yunnanensis) was caught in mist nets on the Socheong Island (37°45′41.4″N, 124°43′46.8″E), Ongjin County, Korea, on October 22, 2021. This is the first confirmed record of the species in Korea based on morphological and phylogenetic analyses. Despite morphological similarity to Pallas’s Leaf Warbler (P. proregulus), Chinese Leaf Warbler could be distinguished based on differences in the median crown strip, supercilium, and secondary wing feathers, and the wing formula of P. yunnanensis also differed from that of P. proregulus; however, other morphometric measurements were comparable. This record can contribute to the enhancement of biodiversity in Korea based on the morphometry and photography of a Phylloscopidae species, for which there was no substantive evidence of record in Korea. These data are useful to formulate keys for the morphological identification of this species in the field.
성낙술,김영국,방진기,박희운,유용환,유흥섭 한국국제농업개발학회 2001 韓國國際農業開發學會誌 Vol.13 No.2
파종시기가 황기의 뿌리수량에 미치는 영향을 알아보고자 3월 중순부터 4월 하순까지 파종시기를 달리하여 시험한 결과는 다음과 같다. 1. 출아기간은 수원과 이천지역 모두 3월 중순 파종시 20일이 소요되었으나 4월 상순 파종구에서는 6일로 가장 짧았다. 2. 지상부는 4월 중순 파종까지는 생육량이 증가하는 경향이었으나 4월 하순 이후에는 감소하는 경향이었다. 3. 지하부 생육은 이천보다 수원시험구에서 지근 발생이 많았으며, 두지역 모두 4월 상순 파종시 건근중이 가장 양호하였다. 4. 수량은 수원과 이천 모두 4월 상순 파종구가 가장 양호하였으며 4월 상순 이후부터는 감소하여 황기 적정파종 시기는 4월 상순으로 생각된다. This experiment was carried out to investigate the difference of growth and yield in A. membranaceus Bunge at different seeding. Time from 1997 to 1998 at Suwon and Ichon, Emergence duration was the longest as 20 days at middle of March seeding in Suwon, but early of April seeding was the shortest as 6 days. Weight of shoot was increased to middle of April seeding but was reduced after late of April. Lateral root was more increased at Suwon than Ichon. Dry root weight and yield were the most increased at April early in the middle of them. but were induced after middle April. As the experimental results, the optimum seeding date for A. membranaceus was April early seeding.
All-ceramic Crown 용 도재의 굽힘강도에 관한 비교연구
유형우,송창용,배태성,송광엽,박찬운 全北大學校 齒醫學硏究所 1993 전북치대논문집 Vol.11 No.1
The purpose of this study was to evaluate the fracture resistance of the four kinds of dental porcelains for the all-ceramic crown(Vita In-Ceram, Vita Hi-Ceram, IPS-Empress, Vitadur-N) and one kind for the metal-ceramic crown(Vita VMK 68) was used as the control group. In order to determine the fracture resistance, the hi-axial flexure strength was measured at a crosshead speed of 0.5㎜/min, and the Victors hadrness was measured at an indentation load of 1㎏ for 20 seconds. The results obtained were summarized as follows ; 1. The maximum Weibull modulus of 24.61 for Vitadur-N and the minimum one of 8.82 for IPS-Empress were observed ; the maximum characteristic strength of 353.26MPa for Vita In-Ceram and the minimum that of 63.20MPa for Vitadur-N were also observed. 2. The maximum mean bi-axial flexure strength of 339.12MPa for Vita In-Ceram and thd minimum one of 61.99MPa for Vitadur-N were calculated. Results of the Scheffe test indicated that the statistically significant difference(P<0.05) existed between Vita In-Ceram or Vita Hi-Ceram and the others ; also beween IPS-Empress and Vitadur-N. 3. The maximum mean hardness of 980.55㎏/㎟ for Vita VMK 68 appeared. Results of the Sche^ffe test indicated that statistically significant difference(P<0.05) existed between Vita In-Ceram or Vita Hi-Ceram and the others ; also between IPS-Empress and Vita VMK 68.
스미스 머신을 이용한 스쿼트 운동시 중량 부하가 운동역학적 변인과 하지 근육 활성도에 미치는 영향
이성도 ( Seong Do Lee ),이정호 ( Jung Ho Lee ),박은정 ( Eun Jung Park ),이기광 ( Ki Kwang Lee ),손지훈 ( Jee Hoon Sohn ),류재진 ( Jae Jin Ryue ),유연주 ( Yeon Ju Yu ),김용운 ( Yong Woon Kim ),김석범 ( Suk Bum Kim ) 한국스포츠정책과학원(구 한국스포츠개발원) 2011 체육과학연구 Vol.22 No.2
이 연구는 고정된 바벨의 궤적을 제공하는 스미스 머신을 이용한 스쿼트 운동시 다양한 중량 부하가 운동형상학적, 운동역학적, 근육 활성도에 미치는 변화 양상을 조사하고자 하였다. 다양한 중량 부하는 최대중량(1RM)의 100%, 90%, 80%, 70%, 60% 5가지 종류의 부하를 선정하였다. 웨이트 트레이닝 경험이 있는 체육 전공 남자 대학생 10명을 대상으로 스미스 머신에서 스쿼트 동작을 실시하였으며, 중량별 부하는 무선표본하여 적용하였다. 변인을 산출하기 위하여 3차원 동작 분석기, 지면반력기, 근전도를 활용하였으며, 8개의 근육(대퇴직근, 내측광근, 외측광근, 대퇴이두근, 전경골근, 내측비복근, 복직근, 척추기립근)을 선정하였다. 분석 구간은 스쿼드 동작시 신체의 하강, 상승, 전 구간으로 구별하였다. 연구결과 부하의 증가는 발목관절의 최대 각도에 영향을 주지 않은 반면 무릎관절, 고관절의 있어 최대 각도가 작아지는 경향을 보였다. 하지관절의 최대 모멘트는 발목관절, 무릎관절, 고관절에 있어 고관절이 부하의 영향을 가장 많이 받는 것으로 조사되었다. 전후 지면반력은 부하의 영향을 받지 않는 것으로 조사되었다. 근육 활성도에 있어 하강, 상승 구간에 있어 대퇴이두근, 내, 외측광근은 부하의 증가에 따라 근육활동이 증가하는 경향을 나타내었지만, 80%RM- 100%RM 부하 사이에서는 차이가 없는 것으로 나타났다. 상승 구간시 척추기립근에 있어 60%와 100%RM 사이에 있어서 부하간 차이가 있었으나 70%RM 이상의 부하 사이에서는 차이가 없는 것으로 조사되었다. The aim of this study was to investigate kinematic, kinetic and EMG pattern during squat exercise in Smith machine with different loads. We added to subjects different loads (100%RM, 90%RM, 80%RM, 70%RM and 60%RM). Ten healthy male subjects who majored physical education were recruited for this study. Subjects performed consecutive cycles randomly loaded by a barbell. We calculated using three dimensional motion capture system, force plate, surface EMG for caculating variables and we selected eight muscles (rectus femoris, vastus meadialis, vastus lateris, biceps femoris, tibialis anterior, medial gastrocnemius, rectus abdominis and erector spine). We divided squat motion to three phase (Downward, Upward, one cycle). This result were that added loads did not affect to peak ankle joint but affect to peak knee joint and peak hip joint. Peak angle of these joint tended to decrease. The peak ankle angle was not affect by added loading while the added loading were decreased peak angle at the knee and hip joint. Peak moment at hip joint was largely influenced by adding loading among lower extremity joints. There was not significant difference in anterior-posterior GRF. According to add loading, muscle activations of vastus meadialis, vastus lateris and biceps femoris muscle tended to increase while there were not on the basis of 80%RM loading in the upward and downward phases. In the upward phase, erector spine muscle was significant difference between 60%RM and 100%RM loading. However, there was also not on the basis of 70%RM loading.