Nodeless superconductivity in the noncentrosymmetric superconductor BiPd

Yan, X B,Xu, Y,He, L P,Dong, J K,Cho, Hwanbeom,Peets, D C,Park, Je-Geun,Li, S Y IOP 2016 Superconductor science & technology Vol.29 No.6

<P>We report low-temperature thermal conductivity measurements on high-quality single crystalline <I>α</I>-BiPd, a noncentrosymmetric superconductor with <I>T</I> <SUB>c</SUB>?≃?3.8 K. In zero magnetic field, the residual linear term <I>κ</I> <SUB>0</SUB>/<I>T</I> is absent, indicating a full gap and suggesting dominant singlet pairing. Consistent with this picture, <I>κ</I> <SUB>0</SUB>(<I>H</I>)/<I>T</I> shows weak field dependence in low field, but grows relatively fast in fields above 0.03 T (≃1/5<I>H</I> <SUB>c2</SUB>). Implications for the material’s disputed high-field behavior are discussed, and constraints are placed on the previously proposed scenarios.</P>

Surface Doping of Conjugated Polymers by Graphene Oxide and Its Application for Organic Electronic Devices

Gao, Yan,Yip, Hin&#x2010,Lap,Chen, Kung&#x2010,Shih,O’Malley, Kevin M.,Acton, Orb,Sun, Ying,Ting, Guy,Chen, Hongzheng,Jen, Alex K.&#x2010,Y. WILEY‐VCH Verlag 2011 Advanced Materials Vol.23 No.16

<P><B>Surface doping of conjugated polymers</B> is realized by depositing a thin layer of graphene oxide (GO) on top of the polymers. The high proton density and the unique 2D structure of GO facilitate the protonic surface doping of conjugated polymers to achieve high conductivities. This finding represents a new strategy for improving charge transport across the metal/conjugated polymer interface to achieve much improved performance in organic solar cells. </P>

Fabrication of polythiophene patterns through blending of a thermally curable polythiophene with poly(methyl methacrylate) and selective thermal curation

Memon, M. A.,Sun, J. h.,Jung, H. T.,Yan, S. k.,Geng, J. x. SPRINGER VERLAG 2017 Chinese journal of polymer science Vol.35 No.3

<P>In this study, we demonstrate a novel method for fabricating polythiophene patterns, i.e., cylindrical holes and cylinders, through blending of a thermally curable polythiophene carrying with tertiary ester groups (PT-tert-ESTER) and poly(methyl methacrylate) (PMMA), followed by thermal conversion of the PT-tert-ESTER to an insoluble polythiophene via low-temperature cleavage of the tertiary ester groups and removal of the PMMA component via ultraviolet degradation. We show that the surface polarity of substrates, the mass ratio of PT-tert-ESTER to PMMA in the blend solutions as well as the concentration of the blend solutions strongly influence the formation of the polythiophene patterns. Cylindrical holes are more readily formed on less polar substrates when a PT-tert-ESTER dominated blend solution is used, while cylinders are more readily formed on more polar substrates when a PMMA dominated blend solution is used. Moreover, the diameters of both the cylindrical holes and the cylinders decrease as the PT-tert-ESTER concentration is increased in the respective ranges of the PT-tert-ESTER/PMMA ratios where the patterns are formed. Grazing incident X-ray diffraction data have indicated that the patterning of the PT-tert-ESTER component in the blend films improves the crystallinity of PT-tert-ESTER as well as the molecular packing of the insoluble polythiophene in the resultant patterned polythiophene films.</P>

Sawtooth-triggered limit-cycle oscillations and I-phase in the HL-2A tokamak

Zhao, K.J.,Cheng, J.,Diamond, P.H.,Dong, J.Q.,Yan, L.W.,Hong, W.Y.,Xu, M.,Tynan, G.,Miki, K.,Huang, Z.H.,Itoh, K.,Itoh, S.-I.,Fujisawa, A.,Nagashima, Y.,Inagaki, S.,Wang, Z.X.,Wei, L.,Song, X.M.,Lei, IOP Publishing 2013 Nuclear fusion. Fusion nucléaire. &n.Illiga Vol.53 No.12

Gradual refinement for application-specific MPSoC design from Simulink model to RTL implementation

Huang, K.,Yan, X. l.,Han, S. i.,Chae, S. i.,Jerraya, A. A.,Popovici, K.,Guerin, X.,Brisolara, L.,Carro, L. Springer Science + Business Media 2009 Journal of Zhejiang University Vol.10 No.2

A Small Modular Reactor design for Multiple Energy Applications: HTR50S

X. Yan,Y. Tachibana,H. Ohashi,H. Sato,Y. Tazawa,K. Kunitomi 한국원자력학회 2013 Nuclear Engineering and Technology Vol.45 No.3

HTR50S is a small modular reactor system based on HTGR. It is designed for a triad of applications to be implemented in successive stages. In the first stage, a base plant for heat and power is constructed of the fuel proven in JAEA’s 950ºC,30MWt test reactor HTTR and a conventional steam turbine to minimize development risk. While the outlet temperature is lowered to 750oC for the steam turbine, thermal power is raised to 50MWt by enabling 40% greater power density in 20%taller core than the HTTR. However the fuel temperature limit and reactor pressure vessel diameter are kept. In second stage, a new fuel that is currently under development at JAEA will allow the core outlet temperature to be raised to 900ºC for the purpose of demonstrating more efficient gas turbine power generation and high temperature heat supply. The third stage adds a demonstration of nuclear-heated hydrogen production by a thermochemical process. A licensing approach to coupling high temperature industrial process to nuclear reactor will be developed. The low initial risk and the high longer-term potential for performance expansion attract development of the HTR50S as a multipurpose industrial or distributed energy source.

A SMALL MODULAR REACTOR DESIGN FOR MULTIPLE ENERGY APPLICATIONS: HTR50S

Yan, X.,Tachibana, Y.,Ohashi, H.,Sato, H.,Tazawa, Y.,Kunitomi, K. Korean Nuclear Society 2013 Nuclear Engineering and Technology Vol.45 No.3

HTR50S is a small modular reactor system based on HTGR. It is designed for a triad of applications to be implemented in successive stages. In the first stage, a base plant for heat and power is constructed of the fuel proven in JAEA's $950^{\circ}C$, 30MWt test reactor HTTR and a conventional steam turbine to minimize development risk. While the outlet temperature is lowered to $750^{\circ}C$ for the steam turbine, thermal power is raised to 50MWt by enabling 40% greater power density in 20% taller core than the HTTR. However the fuel temperature limit and reactor pressure vessel diameter are kept. In second stage, a new fuel that is currently under development at JAEA will allow the core outlet temperature to be raised to $900^{\circ}C$ for the purpose of demonstrating more efficient gas turbine power generation and high temperature heat supply. The third stage adds a demonstration of nuclear-heated hydrogen production by a thermochemical process. A licensing approach to coupling high temperature industrial process to nuclear reactor will be developed. The low initial risk and the high longer-term potential for performance expansion attract development of the HTR50S as a multipurpose industrial or distributed energy source.

Effect of Alcohol Fermented Feed on Lactating Performance, Blood Metabolites, Milk Fatty Acid Profile and Cholesterol Content in Holstein Lactating Cows

Li, X.Z.,Park, B.K.,Yan, C.G.,Choi, J.G.,Ahn, J.S.,Shin, J.S. Asian Australasian Association of Animal Productio 2012 Animal Bioscience Vol.25 No.11

A feeding experiment with 40 lactating Holstein cows and 4 dietary treatments was conducted to investigate supplementation with different levels of alcohol fermented feed to the TMR on lactating performance, blood metabolites, milk fatty acid profile and cholesterol concentration of blood and milk. Forty Holstein lactating cows ($106{\pm}24$ d post-partum; mean${\pm}$SD) were distributed into four groups and randomly assigned to one of four treatments with each containing 10 cows per treatment. The treatment supplemented with TMR (DM basis) as the control (CON), and CON mixed with alcohol-fermented feeds (AFF) at a level of 5%, 10% and 15% of the TMR as T1, T2 and T3, respectively. Dry matter intake and milk yield were not affected by supplementation of AFF. An increased 4% FCM in the milk occurred in cows fed T3 diet compared with CON, while T1 and T2 diets decreased 4% FCM in a dose dependent manner. Supplementation of AFF increased the concentration of albumin, total protein (TP), ammonia, and high density lipoprotein-cholesterol in serum compared with CON. In contrast, supplementation with AFF clearly decreased concentration of blood urea nitrogen (BUN) and total cholesterol (TC) compare with CON. AFF supplementation increased the proportion of C18:1n9 and C18:2n6 compared to CON. A decrease in the concentration of saturated fatty acid (SFA) for T1, T2 and T3 resulted in an increased unsaturated fatty acid (USFA) to SFA ratio compared to CON. Concentration of cholesterol in milk fat was reduced in proportion to the supplemental level of AFF. Feeding a diet supplemented with a moderate level AFF to lactating cows could be a way to alter the feed efficiency and fatty acid profile of milk by increasing potentially human consumer healthy fatty acid without detrimental effects on feed intake and milk production. A substantially decreased cholesterol proportion in milk induced by supplementation AFF suggests that alcohol fermented feed may improve milk cholesterol levels without any negative effects in lactating cows.

Effects of Addition Level and Chemical Type of Propionate Precursors in Dicarboxylic Acid Pathway on Fermentation Characteristics and Methane Production by Rumen Microbes In vitro

Li, X.Z.,Yan, C.G.,Choi, S.H.,Long, R.J.,Jin, G.L.,Song, Man K. Asian Australasian Association of Animal Productio 2009 Animal Bioscience Vol.22 No.1

Two in vitro experiments were conducted to examine the effects of propionate precursors in the dicarboxylic acid pathway on ruminal fermentatation characteristics, $CH_4$ production and degradation of feed by rumen microbes. Fumarate or malate as sodium salts (Exp. 1) or acid type (Exp. 2) were added to the culture solution (150 ml, 50% strained rumen fluid and 50% artificial saliva) to achieve final concentrations of 0, 8, 16 and 24 mM, and incubated anaerobically for 0, 1, 3, 6, 9 and 12 h at $39^{\circ}C$. For both experiments, two grams of feed consisting of 70% concentrate and 30% ground alfalfa (DM basis) were prepared in a nylon bag, and were placed in a bottle containing the culture solution. Addition of fumarate or malate in both sodium salt and acid form increased (p<0.0001) pH of culture solution at 3, 6, 9 and 12 h incubations. The pH (p<0.0001) and total volatile fatty acids (VFA, p<0.05) were enhanced by these precursors as sodium salt at 3, 6 and 9 h incubations, and pH (p<0.001) and total VFA (p<0.01) from fumarate or malate in acid form were enhanced at a late stage of fermentation (9 h and 12 h) as the addition level increased. pH was higher (p<0.001) for fumarate than for malate as sodium salt at 3 h and 6 h incubations. Propionate ($C_3$) proportion was increased (p<0.0001) but those of $C_2$ (p<0.05) and $C_4$ (p<0.01 - p<0.001) were reduced by the addition of sodium salt precursors from 3 h to 12 incubation times while both precursors in acid form enhanced (p<0.011 - p<0.0001) proportion of $C_3$ from 6h but reduced (p<0.018 - p<0.0005) $C_4$ proportion at incubation times of 1, 3, 9 and 12 h. Proportion of $C_3$ was increased (p<0.05 - p<0.0001) at all incubation times by both precursors as sodium salt while that of $C_3$ was increased (p<0.001) from 6h but $C_4$ proportion was decreased by both precursors in acid form as the addition level increased. Proportion of $C_3$ was higher (p<0.01 - p<0.001) for fumarate than malate as sodium salt from 6 h incubation but was higher for malate than fumarate in acid form at 9 h (p<0.05) and 12 h (p<0.01) incubation times. Increased levels (16 and 24 mM) of fumarate or malate as sodium salt (p<0.017) and both precursors in acid form (p<0.028) increased the total gas production, but no differences were found between precursors in both chemical types. Propionate precursors in both chemical types clearly reduced (p<0.0001 - p<0.0002) $CH_4$ production, and the reduction (p<0.001 - p<0.0001) was dose dependent as the addition level of precursors increased. The $CH_4$ generated was smaller (p<0.01 - p<0.0001) for fumarate than for malate in both chemical types. Addition of fumarate or malate as sodium type reduced (p<0.004) dry matter degradation while both precursors in both chemical types slightly increased neutral detergent fiber degradability of feed in the nylon bag.

Linolenic Acid in Association with Malate or Fumarate Increased CLA Production and Reduced Methane Generation by Rumen Microbes

Li, X.Z.,Choi, S.H.,Jin, G.L.,Yan, C.G.,Long, R.J.,Liang, C.Y.,Song, Man K. Asian Australasian Association of Animal Productio 2009 Animal Bioscience Vol.22 No.6

An in vitro study was conducted to investigate the effect of malate or fumarate on fermentation characteristics, and production of conjugated linoleic acid (CLA) and methane ($CH_4$) by rumen microbes when incubated with linolenic acid (${\alpha}-C_{18:3}$). Sixty milligrams of ${\alpha}-C_{18:3}$ alone (LNA), or ${\alpha}-C_{18:3}$ with 24 mM malic acid (M-LNA) or ${\alpha}-C_{18:3}$ with 24 mM fumaric acid (F-LNA) were added to the 150 ml culture solution consisting of 75 ml strained rumen fluid and 75ml McDougall's artificial saliva. Culture solution for incubation was also made without malate, fumarate and ${\alpha}-C_{18:3}$ (Control). Two grams of feed consisting of 70% concentrate and 30% ground alfalfa (DM basis) were also added to the culture solution of each treatment. In vitro incubation was made anaerobically in a shaking incubator up to 12 h at $39^{\circ}C$. Supplementation of malate (M-LNA) or fumarate (F-LNA) increased pH at 6 h (p<0.01) and 12 h (p<0.001) incubation times compared to control and linolenic acid (LNA) treatments. Both malate and fumarate did not influence the ammonia-N concentration. Concentration of total VFA in culture solution was higher for M-LNA and F-LNA supplementation than for control and LNA treatments from 6 h (p<0.040) to 12 h (p<0.027) incubation times, but was not different between malate and fumarate for all incubation times. Molar proportion of $C_3$ was increased by F-LNA and M-LNA supplementation from 6 h (p<0.0001) to 12 h (p<0.004) incubation times compared to control and LNA treatments. No differences in $C_{3}$ proportion, however, were observed between M-LNA and F-LNA treatments. Accumulated total gas production for 12h incubation was increased (p<0.0002) by M-LNA or F-LNA compared to control or LNA treatment. Accumulated $CH_4$ production for 12 h incubation, however, was greatly reduced (p<0.0002) by supplementing malate or fumarate compared to the control, and its production from M-LNA or F-LNA treatment was smaller than that from LNA treatment. Methane production from LNA, M-LNA or F-LNA treatment was steadily lower (p<0.01 - p<0.001) from 3 h incubation time than that from the control, and was also lower for M-LNA or F-LNA treatment at incubation times of 6 h (p<0.01) and 9 h (p<0.001) than for LNA treatment. Methane production from LNA, however, was reduced (p<0.01 - p<0.001) from 3 h to 9 h incubation times compared to the control. Both malate and fumarate increased concentration of trans11-$C_{18:1}$ from 3 h to 12 h incubation (p<0.01), cis9,trans11-CLA up to 6 h incubation (p<0.01 - p<0.01), trans10,cis12-CLA at 3 h (p<0.05) and 12 h (p<0.01), and total CLA for all incubation times (p<0.05) compared to corresponding values for the ${\alpha}-C_{18:3}$ supplemented treatment (LNA). In conclusion, malate and fumarate rechanneled the metabolic $H_2 pathway to production of propionate and CLA, and depressed the process of biohydrogenation and methane generation. Linolenic acid alone would also be one of the optimistic alternatives to suppress the $CH_4$ generation.