http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
DTF를 이용한 순산소연소 조건에서 탈황반응과 CaSO₄ 분해 특성
최욱(Wook Choi),조항대(Hang Dae Jo),최원길(Won Kil Choi),박영성(Yeong Sung Park),길상인(Sang In Keel),이형근(Hyung Keun Lee) 大韓環境工學會 2011 대한환경공학회지 Vol.33 No.6
순산소연소 조건하의 로내 탈황공정에서 황화반응 생성물인 CaSO₄의 재분해가 탈황반응에 미치는 영향이 크다. 본 연구에서는 DTF (Drop Tube Furnace)를 이용하여 반응온도, CO₂, O₂, SO₂ 농도 등을 포함한 다양한 실험 변수들이 CaSO₄ 탈황반응에 미치는 영향을 파악하기 위하여 분해반응의 전환율을 측정하고 반응속도를 계산하였다. 반응온도가 상승함에 따라 CaSO₄ 분해반응의 전환율과 반응속도가 증가하였고 O₂가 존재하는 조건에서 CO₂ 농도의 영향은 크지 않았다. 동일한 조건에서 CaSO₄ 분해속도는 O₂ 농도가 감소함에 따라 증가하였으나 SO₂ 농도가 증가함에 따라 감소되었다. In general, the decomposition of CaSO₄ formed by sulfation reaction in the in-furnace desulfurization process using limestone has strong effect on the desulfurization reaction under the oxy-fuel combustion condition. In this study, the conversion rates were measured and reaction rates were calculated in order to investigate the effects of the experimental variables such as temperature and the concentrations of CO₂, O₂, SO₂, on the CaSO₄ decomposition reaction using DTF (Drop Tube Furnace) in the desulfurization reaction. The conversion rate and the reaction rate of CaSO₄ decomposition reaction were increased with reaction temperature. CO₂ concentration has little effect on CaSO₄ decomposition reaction in the presence of O₂. Under the same experimental conditions, the decomposition rate of CaSO₄ was enhanced with the decreasing the O₂ concentration, but vice versa with the increasing of SO₂ concentration.
순산소연소 조건에서 Drop tube furnace를 이용한 운전변수에 따른 석회석의 탈황특성 연구
최욱 ( Wook Choi ),조항대 ( Hang Dae Jo ),최원길 ( Won Kil Choi ),박영성 ( Yeong Sung Park ),길상인 ( Sang In Keel ),이형근 ( Hyung Keun Lee ) 한국화학공학회 2011 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.49 No.6
순산소연소는 높은 연소 효율과 적은 배가스량, 낮은 질소산화물 농도를 장점으로 하고 있으며 연소온도 조절을 위한 배가스 재순환에 의해 배출되는 연소가스중의 CO2 농도를 95%까지 농축이 가능하므로 석탄 연소설비에 대한 유망한 CCS 기술로 부각되고 있다. 본 연구는 순산소연소 조건에서 배가스의 재순환을 통한 CO2 농도 증가에 기인하는 직접 황화반응이 탈황효율에 미치는 영향을 평가하고 반응온도, CO2 농도, SO2 농도상승이 SO2 제거효율에 미치는 영향과 배가스 중 수분 등이 SO2 제거효율에 미치는 영향을 실험적으로 고찰하였다. 반응온도 1,200 ℃까지 온도 상승에 따라 SO2의 제거효율은 증가하였고 Ca/S비, CO2 농도와 수분이 증가할수록 SO2 제거효율이 증가하였다. 이러한 운전변수는 영향인자 평가를 통하여 Ca/S 비>체류시간>O2농도>반응온도>SO2농도>CO2농도>수분농도의 순으로 탈황반응에 영향을 미치는 것으로 나타났다. 또한 운전변수별 실험결과를 이용하여 로내 건식탈황에 있어서 각 운전변수별 성능 영향인자를 평가할 수 있는 반경험적 모델식을 도출하였다. Oxy-fuel combustion with many advantages such as high combustion efficiency, low flue gas flow rate and low NOx emission has emerged as a promising CCS technology for coal combustion facilities. In this study, the effects of the direct sulfation reaction on SO2 removal efficiency were evaluated in a drop tube furnace under typical oxy-fuel combustion conditions represented by high concentrations of CO2 and SO2 formed by gas recirculation to control furnace combustion temperature. The effects of the operating parameters including the reaction temperature, CO2 concentration, SO2 concentration, Ca/S ratio and humidity on SO2 removal efficiency were investigated experimentally. SO2 removal efficiency increased with reaction temperature up to 1,200 due to promoted calcination of limestone reagent particles. And SO2 removal efficiency increased with SO2 concentrations and the humidity of the bulk gas. The increase of SO2 removal efficiency with CO2 concentrations showed that SO2 removal by limestone was mainly done by the direct sulfation reaction under oxy-fuel combustion conditions. From the impact assessment of operation parameters, it was shown that these parameters have an effects on the desulfurization reaction by the order of the Ca/S ratio > residence time > O2 concentration > reaction temperature > SO2 concentration > CO2 concentration > water vapor. The semi-empirical model equation for to evaluate the effect of the operating parameters on the performance of in-furnace desulfurization for oxy-fuel combustion was established.
다양한 표면개질을 이용한 폴리에테르설폰 막의 친수성 향상
박소정(So Jung Park),황준석(Jun Seok Hwang),최원길(Won Kil Choi),이형근(Hyung Keun Lee),허강무(Kang Moo Huh) 한국고분자학회 2014 폴리머 Vol.38 No.2
본 연구에서는 폴리에테르설폰(polyethersulfone, PES)을 연소배가스에 포함된 수증기를 분리 및 회수하기 위한 고분자 분리막 소재로 사용하기 위해 다양한 물리·화학적 표면개질 방법을 사용하여 PES 평막 표면의 친수성을향상시키고자 하였다. 균일한 PES 평막을 제조한 후 친수성 향상을 위한 개질 방법으로 산처리, 블렌딩 및 플라즈마 처리를 통해 표면개질을 하였고, 표면 특성을 비교하였다. PES 평막 표면의 특성 변화는 ATR-FTIR, XPS, SEM및 접촉각 측정을 통해 관찰하였다. 황산을 이용한 산처리 방법과 양친매성 고분자를 이용한 블렌딩 방법에 의해개질된 PES 평막에서는 접촉각의 변화가 크지 않았다. Ar 플라즈마 처리를 한 경우, 플라스마 처리 시간이 증가함에 따라 PES 표면의 친수성이 크게 증가하는 것을 확인할 수 있었다. 본 결과를 통해 다양한 표면개질 방법 중 플라즈마 방법을 적용하여 PES 표면을 처리하는 것이 PES 막 표면의 친수성 향상에 가장 효과적임을 확인하였다. Polyethersulfone (PES) membranes were modified by various physico-chemical modification methods to enhance the surface hydrophilicity for application as a separation membrane to separate and collect water vapor from the flue gas. Homogeneous PES flat-sheet membranes were prepared and modified by acid treatment, blending and plasma treatment for hydrophilic surface modification. The surface characteristics of the modified PES membranes were eval-uated by ATR-FTIR, XPS, SEM and contact angle measurements. No significant change in hydrophilicity was observed for the PES membranes modified by acid treatment with sulfuric acid or blending with various compositions of polox-amer as an amphiphilic PEO-PPO-PEO tri-block copolymer. On the other hand, Ar plasma treatment led to a significant increase in the hydrophilicity of the surface, depending on the plasma treatment time. As a result, the PES membrane could be the most efficiently surface-treated by applying the plasma treatment for enhancing their surface hydrophilicity.