http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Chan, T.H.T.,Zhou, T.Q.,Li, Z.X.,Guo, L. Techno-Press 2005 Structural Engineering and Mechanics, An Int'l Jou Vol.19 No.3
The hot spot stress approach is usually adopted in the fatigue design and analysis of tubular welded joints. To apply the hot spot stress approach for fatigue evaluation of long span suspension bridges, the FEM is used to determine the hot spot stress of critical fatigue location. Using the local finite element models of the Tsing Ma Bridge, typical joints are developed and the stress concentration factors are determined. As a case for study, the calculated stress concentration factor is combined with the nominal representative stress block cycle to obtain the representative hot spot stress range cycle block under traffic loading from online health monitoring system. A comparison is made between the nominal stress approach and the hot spot stress approach for fatigue life evaluation of the Tsing Ma Bridge. The comparison result shows that the nominal stress approach cannot consider the most critical stress of the fatigue damage location and the hot spot stress approach is more appropriate for fatigue evaluation.
Zhou, X.T.,Ko, J.M.,Ni, Y.Q. Techno-Press 2007 Structural Engineering and Mechanics, An Int'l Jou Vol.25 No.1
This paper describes an experimental study on structural health monitoring of a 1:3-scaled one-story concrete frame subjected to seismic damage and retrofit. The structure is tested on a shaking table by exerting successively enhanced earthquake excitations until severe damage, and then retrofitted using fiber-reinforced polymers (FRP). The modal properties of the tested structure at trifling, moderate, severe damage and strengthening stages are measured by subjecting it to a small-amplitude white-noise excitation after each earthquake attack. Making use of the measured global modal frequencies and a validated finite element model of the tested structure, a neural network method is developed to quantitatively identify the stiffness reduction due to damage and the stiffness enhancement due to strengthening. The identification results are compared with 'true' damage severities that are defined and determined based on visual inspection and local impact testing. It is shown that by the use of FRP retrofit, the stiffness of the severely damaged structure can be recovered to the level as in the trifling damage stage.
X. T. Zhou,J. M. Ko,Y. Q. Ni 국제구조공학회 2007 Structural Engineering and Mechanics, An Int'l Jou Vol.25 No.1
This paper describes an experimental study on structural health monitoring of a 1:3-scaled one-story concrete frame subjected to seismic damage and retrofit. The structure is tested on a shaking table by exerting successively enhanced earthquake excitations until severe damage, and then retrofitted using fiber-reinforced polymers (FRP). The modal properties of the tested structure at trifling, moderate, severe damage and strengthening stages are measured by subjecting it to a small-amplitude white-noise excitation after each earthquake attack. Making use of the measured global modal frequencies and a validated finite element model of the tested structure, a neural network method is developed to quantitatively identify the stiffness reduction due to damage and the stiffness enhancement due to strengthening. The identification results are compared with ‘true’ damage severities that are defined and determined based on visual inspection and local impact testing. It is shown that by the use of FRP retrofit, the stiffness of the severely damaged structure can be recovered to the level as in the trifling damage stage.
Intestinal Development and Function of Broiler Chickens on Diets Supplemented with Clinoptilolite
Wu, Q.J.,Zhou, Y.M.,Wu, Y.N.,Wang, T. Asian Australasian Association of Animal Productio 2013 Animal Bioscience Vol.26 No.7
The purpose of this study was to evaluate the effect of natural clinoptilolite (NCLI) and modified clinoptilolite (MCLI) on broiler performance, gut morphology, intestinal length and weight, and gut digestive enzyme activity. A total of 240 d-old male chicks were randomly assigned to 3 treatments, each of which comprised 8 pens of 10 chicks per pen. Birds in the control group were fed the basal diet, while those in the experimental groups were fed diets supplemented with NCLI at 2% (NCLI group), or MCLI at 2% (MCLI group), respectively, for 42 d. Compared with the control, supplementation with NCLI or MCLI had no significant (p>0.05) effects on productive parameters from d 1 to 42. Supplementation with NCLI or MCLI had no influence on the relative length and weight of small intestine at d 1 to 21. But supplementation with NCLI or MCLI significantly reduced the relative weight of duodenum. Supplementation with MCLI and NCLI was associated with greater (p<0.05) villus height in the jejunal and ileal mucosa compared with those areas in the controls from d 1 to 42. However, supplementation with NCLI and MCLI had no significant (p>0.05) influence on the crypt depth in the jejunal and ileal mucosa compared with those in the controls. The addition of either NCLI or MCLI to the diet improved the activities of total protease, and amylase in the small intestinal contents. In conclusion, supplementation with NCLI or MCLI in diets improved intestinal morphology, increased the intestinal length and weigh and gut digestive enzyme activity.
Hu, X -T,Zhang, F -B,Fan, Y -C,Shu, X -S,Wong, A H Y,Zhou, W,Shi, Q -L,Tang, H -M,Fu, L,Guan, X -Y,Rha, S Y,Tao, Q,He, C Macmillan Publishers Limited 2009 Oncogene Vol.28 No.26
Located at the important tumor suppressor locus, 3p22, PLCD1 encodes an enzyme that mediates regulatory signaling of energy metabolism, calcium homeostasis and intracellular movements. We identified PLCD1 as a downregulated gene in aerodigestive carcinomas through expression profiling and epigenetic characterization. We found that PLCD1 was expressed in all normal adult tissues but low or silenced in 84% (16/19) gastric cancer cell lines, well correlated with its CpG island (CGI) methylation status. Methylation was further detected in 62% (61/98) gastric primary tumors, but none of normal gastric mucosa tissues. PLCD1 methylation was significantly correlated with tumor high stage. Detailed methylation analysis of 37 CpG sites at the PLCD1 CGI by bisulfite genomic sequencing confirmed its methylation. PLCD1 silencing could be reversed by pharmacological demethylation with 5-aza-2′-deoxycytidine, indicating a direct epigenetic silencing. Ectopic expression of PLCD1 in silenced gastric tumor cells dramatically inhibited their clonogenicity and migration, possibly through downregulating MMP7 expression and hampering the reorganization of cytoskeleton through cofilin inactivation by phosphorylation. Thus, epigenetic inactivation of PLCD1 is common and tumor-specific in gastric cancer, and PLCD1 acts as a functional tumor suppressor involved in gastric carcinogenesis.Oncogene (2009) 28, 2466–2475; doi:10.1038/onc.2009.92; published online 18 May 2009
ZhEng, D. W.,Huang, Y. P.,Tang, T. A.,Cui, Q.,Li, A. Z.,Zhou, S. X.,He, Z. J.,Chen, Z.,Zhang, X. J.,Kwor, R. 대한전자공학회 1993 ICVC : International Conference on VLSI and CAD Vol.3 No.1
A novel process for silicon on insulator(SOI) technology has been presented. Single crystal Si is grown by molecular beam epitaxy(MBF) on a porous silicon(PS) system consisting of two layers of PS with different microstructures. Subsequent lateral oxidation converts the structure to SOI wish excellent insulation property. Si islands with a width of 135㎛ and low doping concentration have been achieved.
Kim, D. J.,Ha, D.,Zhou, Q.,Thokchom, A.,Lim, J.,Lee, J.,Park, J.,Kim, T. Royal Society of Chemistry 2017 Nanoscale Vol.9 No.27
<P>Nanowires (NWs) with a high surface-to-volume ratio are advantageous for bio- or chemical sensor applications with high sensitivity, high selectivity, rapid response, and low power consumption. However, NWs are typically fabricated by combining several nanofabrication and even microfabrication processes, resulting in drawbacks such as high fabrication cost, extensive labor, and long processing time. Here, we show a novel NW fabrication platform based on 'crack-photolithography' to produce a micro-/nanofluidic channel network. Solutions were loaded along the microchannel, while chemical synthesis was performed in the nanoslit-like nanochannels for fabricating silver nanobelts (AgNBs). In addition, the NW/NB fabrication platform not only made it possible to produce AgNBs in a repeatable, high-throughput, and low-cost manner but also allowed the simultaneous synthesis and alignment of AgNBs on a chip, eliminating the need for special micro- and/or nanofabrication equipment and dramatically reducing the processing time, labor, and cost. Finally, we demonstrated that the AgNBs can be used as chemical sensors, either as prepared or when integrated in a flexible substrate, to detect target analytes such as hydrogen peroxide.</P>