http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단보 : 2014-2015년 남서해안 종묘장에서 생산된 넙치( Paralichthys olivaceus) 치어의 Kudoa septempunctata 감염실태 조사
김위식 ( Wi Sik Kim ),공경희 ( Kyoung Hui Kong ),정성주 ( Sung Ju Jung ),정명화 ( Myung Hwa Jung ),전찬혁 ( Chan Hyeok Jeon ),김정호 ( Jeong Ho Kim ),오명주 ( Myung Joo Oh ) 한국어병학회 2015 한국어병학회지 Vol.28 No.2
2014년 1월부터 2015년 5월까지 충청남도, 전라북도 및 전라남도에 위치한 6개지지역 (충청남도:태안, 보령, 전라북도: 고창, 전라남도: 무안, 영광, 완도) 총 11개소의 넙치 종묘장으로부터 채집한 넙치 치어 총 660마리 (132 pooling 시료)를 대상으로 Kudoa septempunctata의 감염현황을 조사하였다. 쿠도아 검사를 실시한 결과, 모든 넙치 종묘에서 PCR 음성 결과가 확인되었다. 이상의 결과로 쿠도아 진단 매뉴얼 방법에 의해 조사된 종묘장의 넙치에서는 K. septempunctata가 검출되지 않는 것으로 나타났다. A survey was conducted to investigate the infection of Kudoa septempunctata in 660 olive flounder (Paralichthys olivaceus) (132 pooling samples) cultured in 11 hatcheries in 6 different regions of Korea between 2014 and 2015. Polymerase chain reaction (PCR) results were negative for K. septempunctata for all samples. Based on the kudoa diagnostic manual, K. septempunctata was not detected in olive flounder hatcheries.
고정자 형상 변화를 통한 EV용 구동모터의 유기전압 고조파 저감 설계
위성혁(Sung-Hyeok Wi),진준우(Jun-Woo Chin),차경수(Kyoung-Soo Cha),박현진(Hyeon-Jin Park),홍정표(Jung-Pyo Hong) 한국자동차공학회 2019 한국자동차공학회 부문종합 학술대회 Vol.2019 No.5
This paper proposes the method of reducing induced voltage harmonics in high speed region through the stator optimal design of the electric vehicle traction moto. The design variables of the stator that are sensitive to lowering the induced voltage harmonics are selected using the analysis of variance(ANOVA). From the selected design variables, optimal design was carried out using the response surface method(RSM). Through the optimal design, the harmonic of the induced voltage is reduced so that the line to line induced voltage does not exceed the DC link voltage.
회전자의 기계적 강성을 고려한 터보차저용 초고속 모터 설계
위성혁(Sung-Hyeok Wi),이수경(Soo-Gyung Lee),유준열(Jun-Yeol Ryu),황성우(Sung-Woo Hwang),임명섭(Myung-Seop Lim) 한국자동차공학회 2020 한국자동차공학회 부문종합 학술대회 Vol.2020 No.7
This paper presents design process of ultra-high-speed motor for electric turbo charger considering mechanical stiffness. As the rotational speed of the motor increases, the stress of the rotor increases proportionally to the square of the rotational speed. Therefore, the design is carried out in consideration of not only electrical characteristics but also the mechanical stiffness and of the motor. In this paper, we proceed with the design of the ring type SPMSM with can for electric turbo charger using the following method. First, stress equations based on the radius of the rotor is derived from the equilibrium equations. Then limitation of the outer diameter of a rotor in consideration of stiffness is determined. And then rest of design variables are determined considering electrical characteristics of the motor.
위성혁(Sung-Hyeok Wi),유준열(Jun-Yeol Ryu),홍정표(Jung-Pyo Hong) 한국자동차공학회 2018 한국자동차공학회 학술대회 및 전시회 Vol.2018 No.11
Since the motor for EPS(Electric Power Steering) is an automobile part involved in wheel operation, it is necessary to consider the mechanical response as well as the electrical performance in design stage. Electrical and mechanical performance can be estimated by using both analytical method and finite element method. However, finite element method has the disadvantage such as hard preprocessing and long analysis time. Therefore, in this paper, it is aimed to estimate the electromechanical parameters through mathematical modeling and to improve the mechanical response efficiently by using the voltage equation and the motion equation with the simulink block model. In addition, the speed controller is designed to improve mechanical response. Finally, the mechanical response results of the base model and the improved model are compared through finite element method.
위성혁(Sung-Hyeok Wi),이수경(Soo-Gyung Lee),유준열(Jun-Yeol Ryu),정영훈(Young-hoon Jung),임명섭(Myung-Seop Lim) 한국자동차공학회 2019 한국자동차공학회 학술대회 및 전시회 Vol.2019 No.11
This paper proposes the method of design of ultra-high-speed motor for electric turbo charger considering mechanical stiffness. When the motor rotates at a high speed, there exists stiffness on the rotor, which is proportional to the rotating speed. Therefore, a design considering the mechanical stiffness of rotor is proposed in this paper. First, ranges of rotor outer diameter is determined in accordance with their mechanical stiffness. Then rest of design variables are determined considering design specification. In this paper, a ultra-high speed motor design considering mechanical stiffness of rotor and electric specification is conducted.
Chest PA 검사에서 Bone Suppression 영상처리기법의 유용성에 관한 연구
위대혁(Dae-hyeok WI):김윤재(Yun-jae KIM):김상현(Sang-hyun KIM):구홍욱(Hong-uk Koo),김동성(Dong-sung KIM) 대한영상의학기술학회 2017 대한영상의학기술학회 논문지 Vol.2017 No.1
목 적:Chest PA 검사 시 늑골과 쇄골을 소거하는 bone suppression 영상처리기법의 임상 적용에 대한 유용성을 평가하고자 한다. 대상 및 방법:장비는 CARESTREAM사의 DRXREVOLUTION을 사용하였고, 대상은 KYOTO KAGAKU사의 N1 흉부팬텀으로 하였다. 팬텀을 PA 선자세로 촬영장비의 Stand Detector에 고정하였고, SID는 180cm, 조사야는 14 ×17 로 하고, T-spine 6번 높이에 선속중심을 맞춘 후, 촬영 조건을 120 kVp, 2 mAs을 사용하여 원본 영상과 bone suppression 처리영상을 얻었다. 이후 뼈와 겹치지 않는 폐 부위, 늑골과 겹쳐있는 폐 부위, 쇄골과 겹쳐있는 폐 부위를 Imgae J프로그램을 이용하여 8X8 mm의 관심영역을 설정하여 픽셀값의 평균과 표준편차를 구하고, 이를 이용하여 대조도 대 잡음비, 신호 대 잡음비를 산출하였다. 그리고 모형 종양조직을 관심영역 부위에 위치하여 동일한 방법으로 정량적 평가를 실시하였다. 또한 영상들을 영상의학과 전문의, 방사선사 5명이 영상평가 항목인 영상의 왜곡이 있는가, 보고자하는 병변을 검출할 수 있는가에 대해 정성적 영상평가를 실시하였다. 통계학적 검정은 95% 신뢰수준에서 대응표본 t검정으로 유의한 차이를 분석하였다. 결 과:뼈와 겹치지 않는 폐 부위에서 얻은 bone suppression 영상에서의 픽셀값, 대조도 대 잡음비, 신호대 잡음비가 원본영상보다 높게 측정되었고, 정성적 영상평가에서도 높은 점수를 나타냈다. 하지만 늑골, 쇄골과 겹치는 폐 부위에서 얻은 Bone suppression 영상에서는 픽셀값, 대조도 대 잡음비, 신호 대 잡음비가 원본영상보다 낮게 측정되었고, 정성적 영상평가에서 도 주변 병변 검출 능력이 떨어지는 등 낮은 점수를 나타냈다. 결 론:Chest PA 검사에서 bone suppression 영상처리기법은 원본영상에 비해 흉부내의 뼈가 없는 우수한 화질의 폐를 볼 수 있다는 점에서 임상적용에 대한 유용성은 충분하나 bone suppression 영상처리기법으로 인해 병변에 대한 해상력 저하 등 부작용이 일어날 가능성이 있으며, 이는 영상평가에 대해 부정적인 결과를 가지고 올 수 있으므로 원본 영상과 같이 사용하여 비교 분석을 통해 영상평가가 시행된다면 임상적으로 훨씬 더 효과적일 것이라고 사료된다. Purpose:We evaluated the usefulness of appling the bone suppression function for removing the bone structures, especially the posterior ribs and clavicle structures, compared to the original chest PA. Materials and Methods:We used DXR-REVOLUTION machine and N1 chest phantom. Original and bone suppression images was obtained by phantom set PA erect position, 180cm SID, 14 × 17 field size, T6 center radiation and 120kVp, 2mAs at stand detector. and then it measured the pixel value, CNR and SNR using Image J program set 8X8mm ROI at lung field, lung field overlaying the rib and lung field overlaying the clavicle. Also the simulated tumors is inserted at phantom using same method and measured it. And 1 radiologist and 5 radiologic technologists evaluated qualitatively original and bone suppression images though the image evaluation list. For the statistical test, we analyzed the significant difference with the paired sample t-test at 95% of confidence level. Result:Bone suppression images at lung field showed higher pixel value, CNR, SNR and qualitative test values than the original images. However, Bone suppression images at lung field overlaying the rib, clavicle showed lower pixel value, CNR, SNR and qualitative test values than the original images. Conclusion:Bone suppression function in the Chest PA was useful for clinical application because of obtaining the excellent quality lung field without bone structures compared to original images. However, it may be occurred the negative result about image evaluation because of low resolution and detection ability in chest lesion by suppressing the bone strictures. Therefore, it is recommend that use both original and bone suppression images with comparative analysis.