http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수동저항부재를 사용한 띠형 강보강재의 인발변위를 고려한 수동저항 특성 평가
정성규(Sung-Gyu Jung),이광우(Kwang-Wu Lee),김주형(Ju-Hyong Kim),조삼덕(Sam-Deok Cho) 한국지반신소재학회 2014 한국토목섬유학회 학술발표회 Vol.2014 No.4
Methods of evaluating internal stability of mechanically stabilized earth (MSE) walls is not developed because relative displacement of wall facing is dependent on compaction method, types of backfill and reinforcement, etc. Especially, pullout resistance of reinforcement along pullout displacement is required to design MSE walls effectively because distribution of loads applied to the reinforcement is different under overburden pressure. This research is the beginning for developing design method considering allowable displacement of wall facing. Characteristics of passive resistance under different pullout displacement are evaluated using steel reinforcement with a transverse member. As a result, pullout displacement less than 50 mm should be considered to evaluate pullout resistance for evaluating internal stability of MSE walls over 40% of wall’s height.
강보강재의 대형인발시험을 통한 수동저항부재의 정규화 수동저항 특성 평가
정성규(Sung-Gyu Jung),이광우(Kwang-Wu Lee),홍기권(Ki-Kwon Hong),한중근(Jung-Geun Han) 한국지반신소재학회 2014 한국토목섬유학회 학술발표회 Vol.2014 No.4
Passive resistance of reinforcement, which is mobilized on transverse members perpendicular to the longitudinal direction, is significant for estimating total pullout resistance. Pullout tests are conducted to evaluate the behavior of passive resistance under normal pressure by using steel strip reinforcement with a transverse member. Based on the results, normalized passive resistance tends to decrease nonlinearly under normal pressure increasing.
정성규(Sung-Gyu Jung),이광우(Kwang-Wu Lee),김주형(Ju-Hyong Kim),조삼덕(Sam-Deok Cho),구현진(Hyun-Jin Koo),조항원(Hang-Won Cho) 한국지반신소재학회 2013 한국토목섬유학회 학술발표회 Vol.2013 No.11
In this study, creep reduction factor(RFcr) of geosynthetic strip for reinforcement is estimated by using guideline specified in KS K ISO TR 20432. Time-Temperature Superposition(TTS) and conventional creep test are conducted for the case of 66% ~ 82% of ultimate tensile strength(UTS) of the reinforcement. The creep deformation for the conventional method is slightly different compared to the creep deformation for the SIM. Based on the results, Creep reduction factors are 1.733 using conventional method, and 1.406 using accelerated creep test at 50 years of design life. It makes a large difference in creep reduction factors for both cases because rupture time of the case for applying 70% of UTS appears to be early. Therefore, additional creep rupture data of conventional method is needed to determine reasonable value.
정성규(Sung-Gyu Jung),이광우(Kwang-Wu Lee),김주형(Ju-Hyong Kim),조삼덕(Sam-Deok Cho),구현진(Hyun-Jin Koo),조항원(Hang-Won Cho) 한국지반신소재학회 2012 한국지반신소재학회 학술발표회 Vol.2012 No.11
Creep reduction factor(RF<sub>cr</sub>) of geosynthetics can be determined through conventional creep test and accelerated creep test such as Tim-Temperature Superposition(TTS) or Stepped Isothermal Method(SIM) specified in KS K ISO TR 20432. In this study, Stepped Isothermal Method(SIM) and conventional creep test of strip geosynthetic reinforcement are conducted to evaluate creep tensile deformation. Conventional creep test is being performed about 7,000 hours to compare with the results from accelerated creep test. The behaviour of creep deformation of conventional creep test is similar to that of SIM so far.
지지부재로 이형철근을 설치하는 띠형 강보강재의 인발성능 평가
정성규(Sung-gyu Jung),김주형(Juhyong Kim),조삼덕(Samdeok Cho),이광우(Kwangwu Lee) 한국지반신소재학회 2013 한국지반신소재학회 논문집 Vol.12 No.4
본 연구에서는 지지부재가 설치된 띠형 강보강재에 대한 실내인발시험을 수행하였다. 주문진 표준사를 사용하여 상대밀도 80%인 모형지반을 조성하였고, 지지부재의 개수를 0∼2개로 구분하여 실내인발시험을 수행하였다. 상재압은 50kN/m²∼200kN/m²까지 4단계로 구분하여 적용하였고, 1mm/min 속도로 강보강재를 인발하였다. 표면이 매끄러운 띠형 강보강재의 인발저항력은 보강재 표면과 지반 사이에서 마찰저항만 발현되기 때문에 인발 초기에 급격히 증가하다가 지속적으로 감소하는 경향을 나타낸다. 반면, 지지부재를 설치한 강보강재의 인발저항력은 마찰저항뿐만 아니라 수동저항도 함께 발현되므로 계속적으로 증가하는 것으로 나타났다. 보강재의 형태에 관계없이 최대인발저항은 상재압이 증가함에 따라 선형적으로 증가하는 것으로 나타났다. 지지부재를 1개 설치한 경우에 비해 지지부재를 2개 설치했을 때의 최대수동저항은 작게 나타났다. 이는 지지부재의 설치 간격 및 위치에 따라 지지부재에서 발현되는 수동저항의 크기가 다르기 때문에 나타나는 현상으로 판단되며, 지지부재 설치 위치 및 간격에 따른 추가 인발시험을 통해 확인할 필요가 있다. Laboratory pullout tests were conducted to evaluate pullout performance of steel strip reinforcements with deformed steel bars as transverse members. The steel strip reinforcement has an installation hole to assemble a deformed steel bar. Jumunjin standard sand is used to form a relative density of ground model to 80%. Frictional resistance of steel strip reinforcement without transverse member increases sharply at the initial displacement and quickly decreases with displacement. Maximum frictional resistance increases linearly as normal pressure increasing, and soil-reinforcement interaction friction angle(P<sub>peak</sub>) of a steel strip reinforcement is estimated to 14.64°. Passive resistance increases with displacement and converge into maximum passive resistance in most cases. Maximum passive resistance increases linearly as normal pressure increasing irrespective of shape of the steel reinforcement. Pullout force of steel strip reinforcements with installation holes or transverse members largely increases about 4 to 7 times compared to frictional resistance force of steel strip reinforcements when embedment length(L<sub>e</sub>) of steel strip reinforcements is 500 mm. In the case of using 2 transverse members, interference effect is observed due to the spacing of 2 transverse members and location of assembly holes and transverse members.
정성규(Sung-Gyu Jung),장리(Li Zhuang),염선(Sun Yeom),김광염(Kwang-Yeom Kim),민기복(Ki-Bok Min) 한국암반공학회 2016 터널과지하공간 Vol.26 No.4
본 연구에서는 화강암 내부의 미세균열 분포에 따른 이방성이 수압파쇄실험 결과에 미치는 영향을 평가하였다. 압력증가율을 일정하게 설정하여 수압파쇄실험을 수행한 결과, 원주방향(주입정 방향과 직교)으로 리프트면이 분포한 시료의 파쇄압력이 가장 낮게 측정되었고, 이는 미세균열의 밀도가 높기 때문이다. 수압파쇄실험과정에서 시료 내부의 변화가 발생하는 주입압력의 크기와 유체 주입속도의 변화 또한 결방향에 따라 분포한 미세균열의 밀도와 관계가 있는 것으로 판단된다. 유체주입속도를 일정하게 설정하여 수압파쇄실험을 수행하였을 경우, 상대적으로 미세균열의 밀도가 높은 리프트면이 원주방향으로 분포된 시료에서 주입압력증가율이 낮게 나타났고, 유체가 침투될 수 있는 균열망이 상대적으로 적게 형성된 그레인면 및 하드웨이면이 원주방향으로 분포된 시료에서는 압력증가율이 높게 나타났다. X-ray CT 촬영을 통해 시료 내부에 생성된 균열의 방향을 확인한 결과, 대부분의 시료에서 리프트면 혹은 그레인면과 평행한 방향으로 균열이 생성된 것을 확인하였고, 이는 암석 내에 상대적으로 미세균열의 밀도가 높아서 분리성이 크기 때문이다. In this study, laboratory hydraulic fracturing tests are carried out to evaluate the effects of the cleavage anisotropy of Pocheon granite. Breakdown pressure is smaller when cracks are generated to the direction of rift plane in constant pressurization rate condition because of higher microcracks density. Besides not only injection rate changes but also the amount of injection pressure for fracture initiation and crack expansion is detected while testing due to internal deformation. Pressurization rate is higher while hydraulic fracture testing with constant injection rate condition in case of the specimen which has rift plane perpendicular to borehole because there are much flow paths to penetrate compared to the specimen which has hardway plane perpendicular to borehole. Observation by X-ray CT scanning shows that almost all of cracks due to hydraulic fracturing are generated to the direction of plane which has higher microcrack density that is rift plane or grain plane.