http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Omar, Ali H. (검색결과 679 건)
- 무료
- 기관 내 무료
- 유료
-
Omar Omar,Nejah Tounsi,Eu-Gene Ng,M. A. Elbestawi 대한기계학회 2010 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.24 No.3
This paper presents an Optimized Rational Fraction Polynomial (ORFP) approach for modal parameters estimation from the measurements of the Frequency Response Function (FRF). Although this approach is based on the Rational Fraction Polynomial (RFP) technique described in [1], it suggests the use of a constrained optimization scheme rather than the Forsythe method to overcome the shortcomings of the Forsythe method. The latter are the estimation of modal parameters that do not necessarily describe a stable system and the estimation of fictitious natural frequencies. The formulation of the constrained optimization problem is presented and discussed. The assessment of the performance of the ORFP approach showed that it is better than the RFP approach in terms of its ability to identify modal parameters that ensure a stable system and its flexibility in selecting and setting the natural frequencies of the system. Several illustrative examples are given to demonstrate the robustness of the ORFP approach.
-
Ibrahim, Omar Mohamed Omar,Tayeh, Bassam A. Techno-Press 2020 Advances in concrete construction Vol.10 No.6
Exterior walls in buildings are exposed to various forms of thermal loads, which depend on the positions of walls. Therefore, one of the efficient methods for improving the energy competence of buildings is improving the thermal properties of insulation plaster mortar. In this study, lightweight fine aggregate (LWFA) and micro rubber ash (MRA) from recycled tires were used as partial replacements for sand. The flow ability, unit weight, compressive strength, tensile strength, thermal conductivity (K-value), drying shrinkage and microstructure scan of lightweight rubberized mortar (LWRM) were investigated. Ten mixtures of LWRM were prepared as follows: traditional cement mortar (control mixture); three mixes with different percentages of LWFA (25%, 50% and 75%); three mixes with different percentages of MRA (2.5%, 5% and 7.5%); and three mixes consisting both types with determined ratios (25% LWFA+5% MRA, 50% LWFA+5% MRA and 75% LWFA+5% MRA). The flow ability of the mortars was 22±2 cm, and LWRM contained LWFA and MRA. The compressive and tensile strength decreased by approximately 64% and 57%, respectively, when 75% LWFA was used compared with those when the control mix was used. The compressive and tensile strength decreased when 5% MRA was used. By contrast, mixes with determined ratios of LWFA and MRA affected reduced unit weight, K-value and dry shrinkage.
-
Ibrahim, Omar Mohamed Omar,Heniegal, Ashraf Mohamed,Ibrahim, Khamis Gamal,Agwa, Ibrahim Saad Techno-Press 2020 Advances in concrete construction Vol.10 No.5
This study investigated the effect of horizontal casting joints on the mechanical properties and structural behavior of sustainable self-compacting reinforced concrete beams (SCRCB). The experimental research consisted of two stages. The first stage used four types of concrete mixtures which were produced to indicate the effects of cement replaced with cement waste at 0%, 5%, 10%, and 15% by weight of cement content on fresh concrete properties of self-compacting concrete (SCC) such as, passing ability, filling ability, and segregation resistance. In addition, mechanical properties such as compressive, tensile, and flexural strength were also studied. The second stage selected the best mixture from the first stage and studied the effect of horizontal casting joints on the structural behavior of sustainable SCRCBs. The effect of horizontal casting joints on the mechanical properties and structural behavior were at the 25%, 50%, 75%, and 100% of sample height. Load deflection, failure mode, and theoretical analysis were studied. Results indicated that the incorporation of replacement with cement waste by 5% to 10% led to economic and environmental advantages, and the results were acceptable for fresh and mechanical properties. The results indicated that delaying the time for casting the second layer and increasing the cement waste in concrete mixtures had a great effect on the mechanical properties of SCC. The ultimate load capacity of horizontal casting joints reinforced concrete beams slightly decreased compared with the control beam. The maximum deflection of casting joint beams with 75% of samples height is similar with the control beam. The experimental results of reinforced concrete beams were substantially acceptable with the theoretical results. The failure modes obtained the best forced casting joint on the structural behavior at 50% height of casting in the beam.
-
Talk to engage: The influence of smartphone voice assistants on consumers’ brand engagement
Omar Zaki Hafizah,Omar Nor Asiah,Hashim Sharizal,Kamarulzaman Yusniza,Lada Suddin 한국마케팅과학회 2024 마케팅과학연구 Vol.34 No.4
This study aims to investigate how smartphone voice assistants (SVAs) impact brand engagement among Malaysian university students, who are leading in digital consumption trends. The study aims to investigate how brand characteristics such as appeal, attachment, perceived utility, and usability impact consumer behaviour by utilising Brand Identity and Technology Acceptance models. Analysed using structural equation modelling (SEM) in AMOS, data from 500 students experienced with voice assistants was collected through a survey. The results show strong connections in all studied relationships, emphasising the crucial importance of various brand attributes in promoting engagement. Usability and perceived utility are essential factors, indicating that businesses should focus on creating products that are both functional and user-friendly. The study provides distinctive perspectives on improving student engagement and brand partnerships in a competitive environment. It highlights the necessity for more research to help voice assistant professionals and academics enhance consumer-brand connections, especially among the digitally adept youth population in Malaysia.
-
-
Valorization of Dredged Sediments as a Component of Vibrated Concrete
Omar Safer,Nadia Belas,Omar Belaribi,Khalil Belguesmia,Nasr-Eddine Bouhamou,Abdelkader Mebrouki 한국콘크리트학회 2018 International Journal of Concrete Structures and M Vol.12 No.4
Hydraulic facilities are subjected to significant siltation which, in a very short period of time, can render them unusable. In Algeria, the silting-up of a great number of dams, built for drinking water needs and for irrigation, implies the necessity and urgency to take action. Therefore, the maintenance work, which leads to dredging the deposited silt, constitutes an unbearable obligation for the preservation of the environment. Chorfa dam (western Algeria) may be mentioned as a concrete example. This study is part of a long research whose objective is to contribute to the valorization and the optimization of the formulations economically that are easy to implement and which enable to use the dredged materials in the formulation of ordinary concretes by partial substitution to cement (10, 20 and 30%) of dredged sediments, after calcination at 750℃ to make them active. Tests were carried out on concrete that was vibrated in the fresh state (setting time) and hardened state (compressive strengths and durability of concrete exposed to sulfuric acid attack) in order to determine their characteristics. The results obtained confirmed the possibility to develop concretes containing calcined silt, with proportions up to 30%, and which can meet the economic, ecological and technological objectives.
-
( Omar Ibrahim Saadah ),( Kholoud Bakur Fallatah ),( Cedric Baumann ),( Abdulrahman Ahmed Elbaradie ),( Fatimah Talat Howladar ),( Motaz Tariq Daiwali ),( Omar Hamad Alshuaibi ),( Majid Abdulaziz Alsa 대한장연구학회 2020 Intestinal Research Vol.18 No.2
Background/Aims: Crohn’s disease (CD) may involve the upper parts of the gastrointestinal (GI) tract including the esopha gus, stomach, and duodenum. Clinical features of upper GI CD (UGICD) are not well characterized in the Gulf region. We therefore aimed to assess the prevalence and clinical characteristics of patients diagnosed with UGICD. Methods: We per formed a retrospective analysis of all patients diagnosed with CD who underwent upper GI endoscopy between 2012 and 2017 at King Abdulaziz University Hospital, irrespective of age. Patients who had endoscopy of the upper GI tract at baseline and had histologically confirmed UGICD were included. Data on patients’ demographics, clinical characteristics, extraintestinal mani festations and complications were reviewed. Results: We identified 78 CD patients who underwent upper GI endoscopy from our medical records. The mean age was 17.2±8.7 years and 55.1% were males. Of the total, 19 out of 78 patients (24.4%) had histologically confirmed UGICD (3 esophageal, 16 gastric, and 9 duodenal), of which 52.6% were symptomatic. Disease dis tribution was ileal in 57.8%, colonic in 21.1% and ileo-colonic in 21.1%. A non-stricturing and non-penetrating phenotype was reported in 89.4%, stricturing in 5.3%, and penetrating in 5.3%. Perianal disease was found in 10.5%. UGICD was complicated by stricture formation in 2 patients (esophageal and gastric). Conclusions: The prevalence of UGICD is considered high among CD Saudi patients who undergo upper GI endoscopy at baseline, and is asymptomatic in 47.4% of patients. This reported prev alence is not dissimilar from reports originating from Western countries. (Intest Res 2020;18:210-218)
-
Omar Alageel,Omar Alsadon,Haitham Almansour,Abdullah Alshehri,Fares Alhabbad,Majed Alsarani 대한치과보철학회 2022 The Journal of Advanced Prosthodontics Vol.14 No.6
PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimensizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher’s multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.
-
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
