Analysis of Genotype-by-Environment Interaction for Grain Yield of Rainfed Durum Wheat Genotypes in Warm Winter Areas of Iran

Mohammadi, Reza,Mohammadi, Mohtasham,Karimizadeh, Rahmatollah,Amri, Ahmed 한국작물학회 2010 Journal of crop science and biotechnology Vol.13 No.4

This study was performed for pattern analysis of genotype-by-environment (GE) interaction on 20 durum wheat genotypes grown in 15 testing environments during 2004 - 06 in Iran. Combined analysis of variance showed significant genotypes (G), environments (E), and GE interactions (P < 0.01), with environmental main effects being the predominant source of variation, followed by GE interaction. The results showed various patterns of genotype responses to different environment groups and assisted in structuring the durum wheat testing locations with identification of two major-environment groups with high genotype discrimination ability. The locations (Gachsaran and Ilam) corresponding to warm and semi-arid aresa were similar in genotype discrimination and showed no association with the other testing locations (Gonbad, Moghan, and Khoramabad) representing the Mediterranean area, indicating they differ in rankings of genotypes. The top-yielding genotypes, G13, Gl4 and G9, were highly adapted to warm and semi-arid environments, but those corresponding to the Mediterranean area had a high ability to discriminate the genotypes G16, G11, and Saimareh. The stability and adaptability of specific genotypes were assessed by plotting their nominal grain yields at specific environments in an ordination biplot, which aided in the identification of environment groups. Appropriate check genotypes for all environments or for specific environments were also identified. Pattern analysis allowed a sensible and useful summarization of GE interaction data set and helped to facilitate selecting superior genotypes for target-growing sites.

Information Technology Audit by Internal Auditors

Shaban Mohammadi,Ali Mohammadi 한국유통과학회 2016 KODISA ICBE (International Conference on Business Vol.2016 No.-

In this paper, the objective pursued, the first objective is to provide the estimated time that the internal auditors on audit organization's IT(Information Technology) spend. the second objective of this paper is to identify the key variables associated IT audits by internal auditors. because this study is to investigate the use of sophisticated information technologies in order to maintain a competitive advantage and to realize the economic benefits is essential. The staff at various levels of the business units to perform daily activities of their IT systems. In fact, electronic documents are replacing paper documents. In fact, it can be difficult to find companies that at least one of the areas of financial reporting, operational and compliance purposes, they should not use the information. computer information systems and information technology have become an essential component of most organizations. consequently, in cases such as for ensuring that systems are controlled enough, safe enough, and as i mentioned, the act is required for IT audits.

Analysis of Genotype-by-Environment Interaction for Grain Yield of Rainfed Durum Wheat Genotypes in Warm Winter Areas of Iran

Reza Mohammadi,Mohtasham Mohammadi,Rahmatollah Karimizadeh,Ahmed Amri 한국작물학회 2010 Journal of crop science and biotechnology Vol.13 No.4

This study was performed for pattern analysis of genotype-by-environment (GE) interaction on 20 durum wheat genotypes grown in 15 testing environments during 2004 - 06 in Iran. Combined analysis of variance showed significant genotypes (G), environments (E), and GE interactions (P < 0.01), with environmental main effects being the predominant source of variation, followed by GE interaction. The results showed various patterns of genotype responses to different environment groups and assisted in structuring the durum wheat testing locations with identification of two major-environment groups with high genotype discrimination ability. The locations (Gachsaran and Ilam) corresponding to warm and semi-arid aresa were similar in genotype discrimination and showed no association with the other testing locations (Gonbad, Moghan, and Khoramabad) representing the Mediterranean area, indicating they differ in rankings of genotypes. The top-yielding genotypes, G13, G14 and G9, were highly adapted to warm and semi-arid environments,but those corresponding to the Mediterranean area had a high ability to discriminate the genotypes G16, G11, and Saimareh. The stability and adaptability of specific genotypes were assessed by plotting their nominal grain yields at specific environments in an ordination biplot, which aided in the identification of environment groups. Appropriate check genotypes for all environments or for specific environments were also identified. Pattern analysis allowed a sensible and useful summarization of GE interaction data set and helped to facilitate selecting superior genotypes for target-growing sites.

Extraction of caffeine and catechins using microwave-assisted and ultrasonic extraction from green tea leaves: an optimization study by the IV-optimal design

Vahid Ghasemzadeh-mohammadi,Bahman Zamani,Maryam Afsharpour,Abdorreza Mohammadi 한국식품과학회 2017 Food Science and Biotechnology Vol.26 No.5

In this research, optimal conditions for extraction of caffeine and polyphenols were established from Iranian green tea leaves. In the first step, caffeine was extracted with efficacy about 86% versed to 4.5% of EGC ? EGCG. The EGCG ? EGC was extracted from partially decaffeinated green tea leaves through microwave- assisted extraction (MAE) and ultrasound-assisted extraction (USE) with efficiency levels of 95 and 85%, respectively. The best results for the MAE process were obtained with 7.8 min and three number of extraction cycles and for the USE process were as followed: time 57 min, temperature 65 C, and the number of extraction cycles 3. The total phenol content values at the best conditions of MAE and the USE processes were 125 ± 5 and 96 ± 6 mg gallic acid/g DW. The 50% inhibition (IC50) on 1,1-diphenyl-2-picrylhydrazyl (DPPH) were 56 and 66 mg/ g of phenol for the MAE and USE processes.

Shear strength behavior of crude oil contaminated sand-concrete interface

Mohammadi, Amirhossein,Ebadi, Taghi,Eslami, Abolfazl Techno-Press 2017 Geomechanics & engineering Vol.12 No.2

A laboratory investigation into crude oil contaminated sand-concrete interface behavior is performed. The interface tests were carried out through a direct shear apparatus. Pure sand and sand-bentonite mixture with different crude oil contents and three concrete surfaces of different textures (smooth, semi-rough, and rough) were examined. The experimental results showed that the concrete surface texture is an effective factor in soil-concrete interface shear strength. The interface shear strength of the rough concrete surface was found higher than smooth and semi-rough concrete surfaces. In addition to the texture, the normal stress and the crude oil content also play important roles in interface shear strength. Moreover, the friction angle decreases with increasing crude oil content due to increase of oil concentration in soil and it increases with increasing interface roughness.

Comparing the generalized Hoek-Brown and Mohr-Coulomb failure criteria for stress analysis on the rocks failure plane

Mohammadi, M.,Tavakoli, H. Techno-Press 2015 Geomechanics & engineering Vol.9 No.1

Determination of mobilized shear strength parameters (that identify stresses on the failure plane) is required for analyzing the stability by limit equilibrium method. Generalized Hoek-Brown (GHB) and Mohr-Coulomb (MC) failure criteria are usually used for obtaining stresses on the plane of failure. In the present paper, the applicability of these criteria for determining the stresses on failure plane is investigated. The comparison is based on stresses on the real failure plane which are obtained from the Mohr stress circle. To do so, 18 sets of data (consist of principal stresses and angle of failure plane) presented in the literature are used. In addition, the values account for (VAF) and the root mean square error (RMSE) indices were calculated to check the determination performance of the obtained results. Values of VAF and RMSE for the normal stresses on the failure plane evaluated from MC are 49% and 31.5 where for GHB are 55% and 30.5, respectively. Also, for the shear stresses on failure plane, they are 74% and 36 for MC, 76% and 34.5 for GHB. Results show that the obtained stresses and angles of failure plane for each criterion differ from real ones, but GHB results are closer to the empirical results. Also, it is inferred that results are affected by the failure envelope not real failure plane. Therefore, obtained shear strength parameters are not mobilized. Finally, a multivariable regressed relation is presented for determining the stresses on the failure plane.

A NOTE ON MINIMAL PRIME IDEALS

Mohammadi, Rasul,Moussavi, Ahmad,Zahiri, Masoome Korean Mathematical Society 2017 대한수학회보 Vol.54 No.4

Let R be a strongly 2-primal ring and I a proper ideal of R. Then there are only finitely many prime ideals minimal over I if and only if for every prime ideal P minimal over I, the ideal $P/{\sqrt{I}}$ of $R/{\sqrt{I}}$ is finitely generated if and only if the ring $R/{\sqrt{I}}$ satisfies the ACC on right annihilators. This result extends "D. D. Anderson, A note on minimal prime ideals, Proc. Amer. Math. Soc. 122 (1994), no. 1, 13-14." to large classes of noncommutative rings. It is also shown that, a 2-primal ring R only has finitely many minimal prime ideals if each minimal prime ideal of R is finitely generated. Examples are provided to illustrate our results.

Impact of Healthy Eating Practices and Physical Activity on Quality of Life among Breast Cancer survivors

Mohammadi, Shooka,Sulaiman, Suhaina,Koon, Poh Bee,Amani, Reza,Hosseini, Seyed Mohammad Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.1

Following breast cancer diagnosis, women often attempt to modify their lifestyles to improve their health and prevent recurrence. These behavioral changes typically involve diet and physical activity modification. The aim of this study was to determine association between healthy eating habits and physical activity with quality of life among Iranian breast cancer survivors. A total of 100 Iranian women, aged between 32 to 61 years were recruited to participate in this cross-sectional study. Eating practices were evaluated by a validated questionnaire modified from the Women's Healthy Eating and Living (WHEL) study. Physical activity was assessed using the International Physical Activity Questionnaire (IPAQ). A standardized questionnaire by the European Organization of Research and Treatment of Cancer Quality of Life and its breast cancer module (EORTC QLQ-C30/+BR-23) were applied to determine quality of life. Approximately 29% of the cancer survivors were categorized as having healthy eating practices, 34% had moderate eating practices and 37% had poor eating practices based on nutrition guidelines. The study found positive changes in the decreased intake of fast foods (90%), red meat (70%) and increased intake of fruits (85%) and vegetables (78%). Generally, breast cancer survivors with healthy eating practices had better global quality of life, social, emotional, cognitive and role functions. Results showed that only 12 women (12%) met the criteria for regular vigorous exercise, 22% had regular moderate-intensity exercise while the majority (65%) had low-intensity physical activity. Breast cancer survivors with higher level of physical activity had better emotional and cognitive functions. Healthy eating practices and physical activity can improve quality of life of cancer survivors. Health care professionals should promote good dietary habits and physical activity to improve survivor's health and quality of life.

Out of plane behavior of walls, using rigid block concepts

Mohammadi Gh.M.,Yasrebi F. 국제구조공학회 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.34 No.3

Out of plane behaviors of walls and infills are investigated in this paper, using rigid block concepts. Walls and infills are sometimes separated from top beams because of in plane movement of the walls and crumbling mortar layers under the top beams. Therefore, sufficient strength should be supplied to hold them against out of plane forces. Such walls are studied here under some real and scaled earthquakes, regarding their out of plane behavior. Influences of some reinforcements, connecting the walls to frames or perpendicular walls, are also studied. It is shown that unreinforced walls of regular sizes (3 m high and 4.5 m long) are normally unstable in the earthquakes. However, performing some reinforced bars that connect them to adjacent elements- frames or perpendicular walls - stabilizes them. Eventually, it is concluded that supplying 3 reinforced bars at 1/4, 2/4 and 3/4 of the panel’s height stabilizes the walls in the assumed earthquakes. In this regard, for 20 cm and 35 cm thick walls Φ18mm and Φ20mm bars are to be used, respectively. For walls with other configurations, the forces and required areas of the reinforcements can be determined by the developed method of this paper.

Weed control in irrigated corn by hairy vetch interseeded at different rates and times

Mohammadi, Gholam Reza The Korean Society of Weed Science and The Turfgra 2010 Weed Biology and Management Vol.10 No.1

In order to study the potential of interseeded hairy vetch as a living mulch to control weeds in corn, a field study was conducted at the Agricultural Research Farm, Razi University, Kermanshah, Iran. The experiment was carried out in a split-split plot arrangement with four replications. The main plots were two weed treatments (weedy and weed-free for all of the growing season), the subplots were two hairy vetch planting dates (simultaneous with corn planting and 10 days after corn emergence), and the sub-subplots were three hairy vetch planting rates (0, 25, and 50 $kg\;ha^{-1}$).The results indicated that the weedy condition for all of the growing season reduced corn plant traits, including the seed yield, number of ears per plant, number of seeds per ear, 100-seed weight, height, Leaf Area Index, and leaf chlorophyll content, as compared to the weed-free condition for the entire growing season. The hairy vetch dry weight also was reduced by the full-season weedy condition. The traits under study were not significantly influenced by the hairy vetch planting times, but increasing the hairy vetch planting rate from 0 to 50 $kg\;ha^{-1}$ improved the corn yield, number of seeds per ear, 100-seed weight, height, Leaf Area Index, and leaf chlorophyll content. However, the number of ears per plant was not significantly influenced and the weed dry weight was reduced by half. Overall, from the standpoint of corn seed production, an interseeding amount of 25 $kg\;ha^{-1}$ of hairy vetch is recommended; taking into consideration the legume forage yield, an interseeding amount of 50 $kg\;ha^{-1}$ of hairy vetch is more beneficial.