Removal characteristics of Cd(II) ions from aqueous solution on ordered mesoporous carbon

Linhang Lu,Haibo Zhao,Lu Yan,Guowei Wang,Yulin Mao,Xin Wang,Kai Liu,Xiufang Liu,Qian Zhao,Tingshun Jiang 한국화학공학회 2015 Korean Journal of Chemical Engineering Vol.32 No.10

Ordered mesoporous carbon (CMK-3) was synthesized using SBA-15 mesoporous molecular sieve as a template and sucrose as carbon source. The materials were characterized by XRD, TEM and N2 physical adsorption technique. The resulting CMK-3 was used as adsorbent to remove Cd(II) ions from aqueous solution. The effect of pH, contact time and temperature on adsorption process was investigated in batch experiments. The results showed that the removal percentage could reach ca. 90% at the conditions of initial Cd(II) ions concentration of 20 mg/L, dose of 20mg, pH 6.5, contact time of 3h and 293K. Langmuir and Freundlich models were employed to describe the adsorption equilibrium. The kinetics data were described by the pseudo-first-order and pseudo-second-order models, respectively. The adsorption isotherm was well fitted to the Langmuir model, and the adsorption process was well described by the pseudo-second-order kinetic model.

Study of Several Silica Properties Influence on Sapphire CMP

Haibo Wang,Zhongxiang Zhang,Shibin Lu 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

Colloid silica using as abrasive for polishing sapphire has been extensively studied, which mechanism has also been deeply discussed. However, by the requirement of application enlargement and cost reduction, some new problems appear such as silica service life time, particle diameter mixing, etc. In this paper, several influences of colloid silica usage on sapphire CMP are examined. Results show particle diameter and concentration, pH value, service life time, particle diameter mixing heavily influence removal rate. Further analysis discloses there are two main effect aspects which are quantity of hydroxyl group, contact area for abrasive density stacking between abrasive and sapphire. Based on the discussions, a dynamic process of sapphire polishing is proposed.

Deterministic Bipolar Compressed Sensing Matrices from Binary Sequence Family

( Cunbo Lu ),( Wengu Chen ),( Haibo Xu ) 한국인터넷정보학회 2020 KSII Transactions on Internet and Information Syst Vol.14 No.6

For compressed sensing (CS) applications, it is significant to construct deterministic measurement matrices with good practical features, including good sensing performance, low memory cost, low computational complexity and easy hardware implementation. In this paper, a deterministic construction method of bipolar measurement matrices is presented based on binary sequence family (BSF). This method is of interest to be applied for sparse signal restore and image block CS. Coherence is an important tool to describe and compare the performance of various sensing matrices. Lower coherence implies higher reconstruction accuracy. The coherence of proposed measurement matrices is analyzed and derived to be smaller than the corresponding Gaussian and Bernoulli random matrices. Simulation experiments show that the proposed matrices outperform the corresponding Gaussian, Bernoulli, binary and chaotic bipolar matrices in reconstruction accuracy. Meanwhile, the proposed matrices can reduce the reconstruction time compared with their Gaussian counterpart. Moreover, the proposed matrices are very efficient for sensing performance, memory, complexity and hardware realization, which is beneficial to practical CS.

The Correlation between Thyrotropin and Dyslipidemia in a Population-based Study

Li Lu,Beibei Wang,Zhongyan Shan,Fengwei Jiang,Xiaochun Teng,Yanyan Chen,Yaxin Lai,Jiani Wang,Haibo Xue,Sen Wang,Chenyan Li,He Liu,Ningna Li,Jiashu Yu,Liangfeng Shi,Xin Hou,Qian Xing,Xue Bai,Weiping Te 대한의학회 2011 Journal of Korean medical science Vol.26 No.2

This study investigated the relationship between serum thyrotrophin levels and dyslipidemia in subclinical hypothyroid and euthyroid subjects. A total of 110 subjects with subclinical hypothyroidism and 1,240 euthyroid subjects enrolled in this study. Patients with subclinical hypothyroidism had significantly lower high density lipoprotein cholesterol (HDL-C) levels than those who were euthyroid. The lipid profiles were each categorized and mean thyrotrophin levels were higher in subjects in the dyslipidemia subclasses than subjects in the normal subclasses. Thyrotrophin was positively associated with serum triglyceride and negatively associated with serum HDL-C in women. Thyrotrophin was also positively associated with total cholesterol (TC) in the overweight population along with TC and LDL-C in overweight women. In the euthyroid population, thyrotrophin was positively associated with TC in the overweight population. In conclusion, serum thyrotrophin was correlated with dyslipidemia in subclinical hypothyroid and euthyroid subjects; the correlation was independent of insulin sensitivity.

Study of Several Silica Properties Influence on Sapphire CMP

Wang, Haibo,Zhang, Zhongxiang,Lu, Shibin The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

Colloid silica using as abrasive for polishing sapphire has been extensively studied, which mechanism has also been deeply discussed. However, by the requirement of application enlargement and cost reduction, some new problems appear such as silica service life time, particle diameter mixing, etc. In this paper, several influences of colloid silica usage on sapphire CMP are examined. Results show particle diameter and concentration, pH value, service life time, particle diameter mixing heavily influence removal rate. Further analysis discloses there are two main effect aspects which are quantity of hydroxyl group, contact area for abrasive density stacking between abrasive and sapphire. Based on the discussions, a dynamic process of sapphire polishing is proposed.

Binary Sequence Family for Chaotic Compressed Sensing

( Cunbo Lu ),( Wengu Chen ),( Haibo Xu ) 한국인터넷정보학회 2019 KSII Transactions on Internet and Information Syst Vol.13 No.9

It is significant to construct deterministic measurement matrices with easy hardware implementation, good sensing performance and good cryptographic property for practical compressed sensing (CS) applications. In this paper, a deterministic construction method of bipolar chaotic measurement matrices is presented based on binary sequence family (BSF) and Chebyshev chaotic sequence. The column vectors of these matrices are the sequences of BSF, where 1 is substituted with -1 and 0 is with 1. The proposed matrices, which exploit the pseudo-randomness of Chebyshev sequence, are sensitive to the initial state. The performance of proposed matrices is analyzed from the perspective of coherence. Theoretical analysis and simulation experiments show that the proposed matrices have limited influence on the recovery accuracy in different initial states and they outperform their Gaussian and Bernoulli counterparts in recovery accuracy. The proposed matrices can make the hardware implement easy by means of linear feedback shift register (LFSR) structures and numeric converter, which is conducive to practical CS.

Silica Nano-particle Anneal Treatment and Its Effect on Chemical Mechanical Polishing

Junning Chen,Shibin Lu,Haibo Wang,Ying Meng,Feifei Wang,Min Fan 대한전기학회 2019 Journal of Electrical Engineering & Technology Vol.14 No.1

Introduction: Chemical mechanical polishing is the only one technology to obtain global planarization, which is widely applied to polish silicon, copper dual damascene structure, high/low K dielectric materials, tungsten plugs, poly-silicon gates and shallow trench isolation structure. SiO2 is widely used as abrasive for its superior properties like stability, suspension property and low viscosity There are lots of studies on silica properties. However, the detailed silica surface, inner characteristic and its effect on polishing performance are still unclear. we must also explore the silica nano-particle tiny structure difference, so we designed an experiment that we anneal the colloid silica and re-dispersed it to analyze the variety of particles properties and its influences on CMP performance. Materials: The water glass was purchased from the market. KOH (90%) and H2SO4 (98%) were purchased commercially from Shanghai Aladdin Bio-Chem technology Co., Ltd. All reagents were of analytical grade and used without further purification. Method: Diluted KOH or H2SO4 were added to 1 wt% annealed silica slurry to adjust pH value to 11.0. The slurry was milled in the polishing process. Arsenic doped 4 inch (100) silicon wafer was used to polish. The structural and morphological evolution of silica nano-particles induced by heat treatment are studied by scanning electron microscopy (SEM), X-Ray diffraction (XRD), Fourier transform infrared spectrum (FTIR), differential thermal (DTA) and thermal gravimetric analysis (TGA), which disclose the external and internal structure.

PROGRAM LOAD SPECTRUM COMPILATION FOR ACCELERATED LIFE TEST OF PARABOLIC LEAF SPRING

Jie Zhang,Jian-Wei Lu,Weiduo Han,Haibo Li 한국자동차공학회 2019 International journal of automotive technology Vol.20 No.2

A method of program load spectrum compilation suitable for ALT (accelerated life test) of parabolic leaf spring was presented. In order to shorten the design and test period, road test is conducted on proving ground roads. The displacement spectrum of shock absorber connecting the point of the parabolic leaf spring seat on a commercial vehicle exposed to roads was obtained. The FEA (finite element analysis) method was used to obtain stress spectrum of hot spots on leaf spring by the displacement spectrum, and the fatigue life of the leaf spring is predicted using Palmgren-Miner's rule. Statistical characteristics of the amplitudes and means of the displacement spectrum is investigated. The amplitudes and means of displacement spectrum found in experiment obey Weibull distribution and normal distribution respectively, and the distributions of amplitudes and means are independent. Based on the Conover principle, the two-dimensional spectrum with eight levels is established by applying the cycle extrapolation method, and then it is converted into one-dimensional spectrum with the variable mean method. Follow the theory of equal damage, the program load spectrum is compiled suitable for bench test of fatigue life of leaf spring. The method of program load spectrum compilation can provide reference for fatigue life test and life prediction of parabolic leaf spring assembly.

Incomplete Cholesky Decomposition based Kernel Cross Modal Factor Analysis for Audiovisual Continuous Dimensional Emotion Recognition

( Xia Li ),( Guanming Lu ),( Jingjie Yan ),( Haibo Li ),( Zhengyan Zhang ),( Ning Sun ),( Shipeng Xie ) 한국인터넷정보학회 2019 KSII Transactions on Internet and Information Syst Vol.13 No.2

Recently, continuous dimensional emotion recognition from audiovisual clues has attracted increasing attention in both theory and in practice. The large amount of data involved in the recognition processing decreases the efficiency of most bimodal information fusion algorithms. A novel algorithm, namely the incomplete Cholesky decomposition based kernel cross factor analysis (ICDKCFA), is presented and employed for continuous dimensional audiovisual emotion recognition, in this paper. After the ICDKCFA feature transformation, two basic fusion strategies, namely feature-level fusion and decision-level fusion, are explored to combine the transformed visual and audio features for emotion recognition. Finally, extensive experiments are conducted to evaluate the ICDKCFA approach on the AVEC 2016 Multimodal Affect Recognition Sub-Challenge dataset. The experimental results show that the ICDKCFA method has a higher speed than the original kernel cross factor analysis with the comparable performance. Moreover, the ICDKCFA method achieves a better performance than other common information fusion methods, such as the Canonical correlation analysis, kernel canonical correlation analysis and cross-modal factor analysis based fusion methods.

Multiscale Adaptive Local Directional Texture Pattern for Facial Expression Recognition

( Zhengyan Zhang ),( Jingjie Yan ),( Guanming Lu ),( Haibo Li ),( Ning Sun ),( Qi Ge ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.9

This work presents a novel facial descriptor, which is named as multiscale adaptive local directional texture pattern (MALDTP) and employed for expression recognition. We apply an adaptive threshold value to encode facial image in different scales, and concatenate a series of histograms based on the MALDTP to generate facial descriptor in term of Gabor filters. In addition, some dedicated experiments were conducted to evaluate the performance of the MALDTP method in a person-independent way. The experimental results demonstrate that our proposed method achieves higher recognition rate than local directional texture pattern (LDTP). Moreover, the MALDTP method has lower computational complexity, fewer storage space and higher classification accuracy than local Gabor binary pattern histogram sequence (LGBPHS) method. In a nutshell, the proposed MALDTP method can not only avoid choosing the threshold by experience but also contain much more structural and contrast information of facial image than LDTP.