A Miniaturized Catadioptric Laser-Irradiation-Precision Test System

Huan Liu,Hao Sun,Chunyan Wang 한국광학회 2021 Current Optics and Photonics Vol.5 No.2

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system’s design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distor-tion is better than 0.18%, and the energy concentration in the 10-μm-radius surrounding circle reachesabout 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

Abdominal-Deformation Measurement for a Shape-Flexible Mannequin Using the 3D Digital Image Correlation

Huan Liu,Kuangrong Hao,Yongsheng Ding 한국정보과학회 2017 Journal of Computing Science and Engineering Vol.11 No.3

In this paper, the abdominal-deformation measurement scheme is conducted on a shape-flexible mannequin using the DIC technique in a stereo-vision system. Firstly, during the integer-pixel displacement search, a novel fractal dimension based on an adaptive-ellipse subset area is developed to track an integer pixel between the reference and deformed images. Secondly, at the subpixel registration, a new mutual-learning adaptive particle swarm optimization (MLADPSO) algorithm is employed to locate the subpixel precisely. Dynamic adjustments of the particle flight velocities that are according to the deformation extent of each interest point are utilized for enhancing the accuracy of the subpixel registration. A test is performed on the abdominal-deformation measurement of the shape-flexible mannequin. The experiment results indicate that under the guarantee of its measurement accuracy without the cause of any loss, the time-consumption of the proposed scheme is significantly more efficient than that of the conventional method, particularly in the case of a large number of interest points.

Rhamnocitrin (Rha) attenuates ovarian fibrosis in rats with letrozole-induced experimental polycystic ovary syndrome (PCOS)

Huan Lan,Zhewen Dong,Yaqi Wu,Chaojie Chong,Zhiqiang Liu,Wanying Li,Zixian Wang,Junyang Liu,Qi Qi Pang,Jia-Le Song,Yanyuan Zhou 한국식품영양과학회 2021 한국식품영양과학회 학술대회발표집 Vol.2021 No.10

In this study, we investigated the antifibrotic effects of Rha on letrozole-induced PCOS in rats. Rha treatment restored letrozole-induced alterations in the body weight (BW), relative weights of the ovaries, and relative weights of uterine and visceral adipose tissues. Histological observation showed that Rha reduced the number of atretic follicles, cystic follicles, and fibrosis of the ovaries in the PCOS rats. Administration of Rha reduced letrozole-induced metabolic dysfunction by decreasing the serum levels of TG and TC and increasing the levels of HDL-C in the PCOS rats. Rha treatment also modulated the serum levels of sex hormones, which decreased the LH, E2 and T and increased the FSH in PCOS rats. Finally, Rha treatment appeared to increase the activity of PPAR-γ, reduce the activation of the TGF-β1/Smad pathway, and reduce the collagen I, α-SMA and CTGF levels in the ovaries of the PCOS rats. Our results demonstrated that Rha significantly ameliorated metabolic disturbances and ovarian fibrosis in the letrozole-induced PCOS rats. Rha may be an effective compound in preventing ovarian fibrosis in the future.

Abdominal-Deformation Measurement for a Shape-Flexible Mannequin Using the 3D Digital Image Correlation

Liu, Huan,Hao, Kuangrong,Ding, Yongsheng Korean Institute of Information Scientists and Eng 2017 Journal of Computing Science and Engineering Vol.11 No.3

In this paper, the abdominal-deformation measurement scheme is conducted on a shape-flexible mannequin using the DIC technique in a stereo-vision system. Firstly, during the integer-pixel displacement search, a novel fractal dimension based on an adaptive-ellipse subset area is developed to track an integer pixel between the reference and deformed images. Secondly, at the subpixel registration, a new mutual-learning adaptive particle swarm optimization (MLADPSO) algorithm is employed to locate the subpixel precisely. Dynamic adjustments of the particle flight velocities that are according to the deformation extent of each interest point are utilized for enhancing the accuracy of the subpixel registration. A test is performed on the abdominal-deformation measurement of the shape-flexible mannequin. The experiment results indicate that under the guarantee of its measurement accuracy without the cause of any loss, the time-consumption of the proposed scheme is significantly more efficient than that of the conventional method, particularly in the case of a large number of interest points.

Study on High Resistance Distance Relay in Directly Earth System

Liu, Huan-Zhang,Li, Ying-Hong The Korean Institute of Electrical Engineers 2011 The Journal of International Council on Electrical Vol.1 No.4

The coverage of transition resistance and the avoidance of load impedance is in essence a contradiction for distance protection. It's evident from the impedance plane that the requirement to avoid the load impedance results in that the action space of the distance relay is greatly limited, which accordingly reduces the ability of the relays to cover the transition resistance. In fact, there are some limitations to analyze the distance relays in the impedance plane. It would be better in the voltage plane. The three elements of distance relay in the voltage plane are the polarization voltage, operation voltage and operation characteristic, of which the polarization voltage is most important. The relay could ideally select pre-fault voltage as polarization voltage, while it practically employs the positive voltage. The difference between the two kinds of polarization voltage is negligible in the state of low impedance ground fault, while significant in the state of high impedance ground fault. Thus, this paper uses the memory and the non-fault phase parameters to gain the pre-fault voltage, that is, the new polarization voltage, and puts forward a new self-adaptive high impedance ground distance relay.

Hybrid mean value of generalized Bernoulli numbers, general Kloosterman sums and Gauss sums

Huaning Liu,Wenpeng Zhang 대한수학회 2007 대한수학회지 Vol.44 No.1

The main purpose of this paper is to use the properties ofprimitive characters, Gaus ums and Ramanujan’s um to stu dy thehybrid mean value of generalized Bernouli numbers, general Klostermansums and Gaus ums, and give two asymptotic formulae.

Accuracy of the Different Calculation Methods of Specific Edge Load

LIU Huan,DONG Jixian,LUO Chong,DUAN Chuanwu,GUO Xiya,QI Kai,QIAO Lijie,ZHAO Zhiming 한국펄프·종이공학회 2020 펄프.종이기술 Vol.52 No.5

Impact of selected fungi from an artificial diet on the growth and development of Drosophila suzukii (Diptera: Drosophilidae)

Huan-Huan Gao,Nan Xu,Hao Chen,Qian Liu,Qian-Yun Pu,Dong-Yun Qin,Yi-Fan Zhai,Yi Yu 한국응용곤충학회 2017 Journal of Asia-Pacific Entomology Vol.20 No.1

Drosophila suzukii (Diptera: Drosophilidae) is one of the very few Drosophila species which are able to lay eggs and feed on healthy ripening fruit. Adults and larvae are all able to obtain the nutrition in the decaying food, which will generate many microorganisms. However, the relationship between D. suzukii and microorganism is poorly understood. In this study, 13 species of fungi were identified in an artificial diet fed by D. suzukii. Short-term and continuously life table experiments were conducted to determine the impact of three of these fungus species including Geotrichum candidum, Talaromyces minioluteus and Actinomucor elegans on the growth and development of Drosophila suzukii. Results revealed that, compared to the control, G. candidum, T.minioluteus and A. elegans increased the mortality of D. suzukii adults in the short time, while extended the developmental time of pupal D. suzukii by 18.00%, 16.22% and 26.44%, respectively in the life table experiment. T. minioluteus reduced the total longevity of D. suzukii by 15.52%, while A. elegans enhanced the total longevity by 25.96%. G. candidum and A. elegans increased the fecundity bymore than two folds. T. minioluteus elongated the mean generation time (T) by 31.34%, whereas G. candidum shortened it by 15.26% but increased the net reproductive rate (R0) by 217.76%, intrinsic rate of increase (r) by 88.89% and finite rate of increase (λ) by 9.17%. It was concluded that G. candidumand A. elegans significantly had the beneficial effect on the growth and reproduction of D. suzukii, however, T. minioluteus had the negative effect on D. suzukii. Our results could provide a new integrated pest management strategy for D. suzukii which would be discussed in this study.

Characterization of the Parameters for the Refining Intensity in Terms of Performance

Huan Liu,Jixian Dong,Hui Jing,Xiya Guo,Lijie Qiao 한국펄프·종이공학회 2019 펄프.종이기술 Vol.51 No.2

Refining intensity is typically used to measure the efficiency of refining in the pulp and paper industry, and the refining intensity is difficult to analyze due to the various parameters influencing it. In this paper, the previously published refining intensities of a disc refiner were analyzed, and the characterization parameters were proposed. Based on the bar interactions, the refining intensity was established using theoretical derivation. The cut edge length (CEL), the CEL-based characterization parameters and bar interactions (BI) characterization parameters were used to show that the CEL directly reflected the number of bar interaction points, but it had no direct relationship with the bar interaction area (BIA) and bar interaction length (BIL). By analyzing the relationship between the different refining intensities and the properties of the fibers or pulp, it could be concluded that the specific refining energy (SRE) better reflected the variations in the beating degree of the pulp during the refining process compared with the specific surface load (SSL) and BI-based refining intensities. Also, the intensity based on the bar interaction length (BIL) can better characterize the changes in the average fiber length. However, all the intensities analyzed in this paper do not comprehensively describe the refining process and cannot predict all the parameters of the pulp and fibers but only partly characterize their properties. Therefore, further studies are required to establish a more comprehensive and precise measure of refining intensity.

No-Load Power of Disc Refiner in Low Consistency Refining

Huan LIU,Jixian DONG,Xiya GUO,Bo Wang,Qiao Lijie,Chuanwu DUAN,Kai QI,Lingbo Kong 한국펄프·종이공학회 2020 펄프.종이기술 Vol.52 No.2

Disc refiner is the key equipment in pulping and papermaking process, and the no-load power of disc refiner will directly affect the refining efficiency. So the refining efficiency and energy saving of the refining process will be promoted through theoretical and experimental study on it. In this paper, the measurement and the theoretical calculation method of the no-load power of disc refiner in low consistency refining were summarized. And the effects of pulp properties, control parameters and bar parameters of refining plate on no-load power were analyzed. The main research direction of the no-load power of disc refiner was proposed which has a positive significance on energy saving and pulp quality improvements of refining process.