http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권세원(S. W. Kwon),박용범(Y. B. Park),권신원(S. W. Kwon),권용무(Y. M. Kwon),김점식(J. S. Kim),송현석(H. S. Song),문성원(M. S. Mun),신운용(W. Y. Shin) 한국조명·전기설비학회 2006 한국조명·전기설비학회 학술대회논문집 Vol.2006 No.11월
기존의 인력굴착을 통한 지선근가 매설시공방법을 오거크레인에 의한 기계화시공을 하기 위하여 오거크레인 굴착공에 적합한 원형 지선근가를 개발을 하고 개발된 원형근가를 오거크레인을 이용한 기계화시공에 적용함으로써 공사시간 및 비용 절감과 시공품질의 향상을 이루려 한다.
포스터 전시 : 담도,췌장 ; 급성 비결석성 담낭염에 동반된 간문맥과 상장간막정맥 혈전증 1예
류성태 ( S. T. Ryu ),이진우 ( J. W. Lee ),이경오 ( K. O. Lee ),김화숙 ( W. S. Kim ),정석 ( S. Jung ),이돈행 ( D. H. Lee ),권계숙 ( G. S. Kwon ),김범수 ( P. S. Kim ),조현근 ( H. G. Cho ),김형길 ( H. G. Kim ),신용운 ( Y. W. Sin ),김영수 대한소화기학회 2002 대한소화기학회 춘계학술대회 Vol.2002 No.-
간문맥 또는 장간막정맥 혈전증의 원인은 원발성과 이차적 원인으로 Protein C, Protein S, Antithrombin Ⅲ 결핍 등의 과응고 상태, 복부외상, 문맥압 항진증, 복강내 악성종양, 골수증식성질환, 염증성 장질환, 그리고 췌장염, 복막염, 맹장염 등의 복강내 감염이 있다. 급성 담낭염에 의한 간문맥과 장간막정맥 혈전증은 극히 드물어 아직까지 국내에서 보고된바 없다. 저자들은 급성 비결석성 담낭염의 합병증으로 발생하여 항응고요법으로 호전
Characteristic of Lettuce (Lactuca sativa L.) Grown with Effective Microorganism and Bio-fertilizer
H.S.Kim,S.M. Choi,D. Supeno,Okka A.,S.W. Chung,H.S.Kim,J.S. Kim,J.M. Park,S.H. Kwon,S.K. Kwon,W.S. Choi 한국산업융합학회 2014 한국산업융합학회 논문집 Vol.17 No.3
The purpose of this study was to evaluate the growth of lettuce last for 36 days. Lettuce planted on the same medium with different treatment. The first treatment watering using bio-fertilizer (farmer) and second watering using effective microorganism. Lettuce grown in greenhouse with temperature 18-32℃.Characteristic observed that growth in height and weight of the plants. From the observations that can be generated at high observation, treatment 1 had a higher than treatment 2. On the last day treatment plant with treatment 1 had a 99.8 mm high while treatment 2 has height of 90.7 mm. Observation on severe treatment 1 has a heavier weight than treatment 2. Plants with treatment 1 have a weight on the last day of 0.15665 grams while in plants with treatment 2 weights are 0.11365 grams.
송전선로에서 스페이서지그(Spacer Jig)를 이용한 스페이서댐퍼 유지보수공법
김점식(J.S Kim),권세원(S.W Kwon),박용범(Y.B Park),권신원(S.W Kwon),문성원(S.W Mun),조성문(S.M Cho),김도영(D.Y Kim) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.4
다도체 송전선로에서 전선 간격 유지 및 진동을 완화시켜주는 역할을 하는 스페이서댐퍼가 손상 받게 되면 즉시 유지보수 및 교체 작업을 하여야 한다. 그러나 이러한 작업은 송전선로 위에서 이루어지므로 전선의 장력과 작업자의 하중으로 인해 유지보수 및 교체작업이 매우 어렵고, 작업시간이 많이 소요되며, 전선표면 손상, 스페이서댐퍼의 위치 변동 및 무리한 작업으로 인한 작업안전성 저하 등의 문제점이 있다. 따라서, 상기한 문제점을 해소하고 작업 효율의 상승을 위하여 작업시 각 전선의 간격을 쉽게 벌리고 좁힐 수 있는 작업용 공구인 스페이서지그(Spacer Jig)와 이를 이용한 송전선로의 스페이서댐퍼 유지보수 및 교체공법을 개발하여 교체작업시간 단축 및 작업안전성을 향상시킨 우수한 기술을 개발하였다.
DBM을 활용한 EMR 기반의 스트로크환자의 재활프로토콜 추천 시스템
이선우(S. W. Lee),박경남(K. N. Park),김세진(S. J. Kim),원인수(I. S. Won),권장우(J. W. Kwon) 한국재활복지공학회 2017 한국재활복지공학회 학술대회논문집 Vol.2017 No.4
Most existing stroke rehabilitation training systems were determined by empirical treatment methods of doctors. Standard treatment guidelines for stroke rehabilitation have been introduced to address these problems. However, these guidelines are determined by the doctor"s objective judgment, and sometimes the doctor suggests different treatments for the same patient. In addition, there are cases where only the patient"s exercise function is presented and the individual"s risk management factor is missing during rehabilitation treatment. To solve these problems, this paper proposes a training method suitable for the patient using DBN (Deep Belief Network). In this method, a part of the patient"s EMR(Electronic Medical Records) data and a risk management factor are inputted and a method of presenting a suitable exercise to the patient is derived.
Tribology Characteristics in 200 μm of Hexagonal Array Dimple Pattern
W. S. Choi,Angga S. H.,S. H. Kwon,S. G. Kwon,J. M. Park,J. S. Kim,S. W. Chung,Y. H. Chae 한국트라이볼로지학회 2015 한국트라이볼로지학회지 (Tribol. Lubr.) Vol.31 No.2
This study investigates the effects of a pattern of 200 μm dimples in a hexagonal array on tribological characteristics. A textured surface might reduce the friction coefficient and wear caused by third-body abrasion and thus improve the tribological performance. There are three friction conditions based on the Stribeck curve: boundary friction, mixed friction, and fluid friction conditions. In this experiment, we investigate the friction characteristics by carrying out the friction tests at sliding speeds ranging from 0.06 to 0.34 m/s and normal load ranging from 10 to 100 N. We create dimple surfaces for texturing by using the photolithography method. There are three kinds of specimens with different dimple densities ranging from 10% to 30%. The dimple density on the surface area is the one of the important factors affecting friction characteristics. Friction coefficient generally decreases with an increase in the velocity and load, indicating that the lubrication regime changes depending on the load and velocity. The fluid friction regime is fully developed, as indicated by the duty number graph. Fluid friction occurs at a velocity of 0.14-0.26 m/s. The best performance is seen at 10% dimple density and 200 μm dimple circle in the hexagonal array.