http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yuan Lu,Ji-Qiang Gao,Jian-feng Yang 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.6
In this paper, porous Si3N4 ceramics were fabricated by carbothermal reduction between silicon dioxide and carbon [1]. The influences of α-Si3N4 seeds and sintering additives on the microstructure and mechanical properties of porous Si3N4 ceremics were investigated. XRD analysis proved the complete formation of a single-phase β-Si3N4. SEM analysis showed that the resultant porous Si3N4 ceramics had a fine microstructure and a uniform pore structure. The sintered sample with Lu2O3 as sintering additive showed finer, higher aspect ratio β-Si3N4 grains. The addition of Eu2O3 accelerated the densification of porous Si3N4 ceramics, decreased the porosity and increased the flexural strength. The addition of α-Si3N4 seeds accelerated the formation of the α-Si3N4 phase at a low temperature and the α-β phase transformation process at a high temperature. With an increase in the α-Si3N4 seeds content, the porosity decreased, and the flexural strength increased accordingly. In this paper, porous Si3N4 ceramics were fabricated by carbothermal reduction between silicon dioxide and carbon [1]. The influences of α-Si3N4 seeds and sintering additives on the microstructure and mechanical properties of porous Si3N4 ceremics were investigated. XRD analysis proved the complete formation of a single-phase β-Si3N4. SEM analysis showed that the resultant porous Si3N4 ceramics had a fine microstructure and a uniform pore structure. The sintered sample with Lu2O3 as sintering additive showed finer, higher aspect ratio β-Si3N4 grains. The addition of Eu2O3 accelerated the densification of porous Si3N4 ceramics, decreased the porosity and increased the flexural strength. The addition of α-Si3N4 seeds accelerated the formation of the α-Si3N4 phase at a low temperature and the α-β phase transformation process at a high temperature. With an increase in the α-Si3N4 seeds content, the porosity decreased, and the flexural strength increased accordingly.
Jian, Fang-Fang,Zhao, Pu-Su,Wang, Huan-Xiang,Lu, Lu-De Korean Chemical Society 2004 Bulletin of the Korean Chemical Society Vol.25 No.5
The tetranuclear copper(II) cluster compound $[Cu_4OCl_6(C_{14}H_{12}N_2)_4]$ has been synthesized by hydrothermal reaction and studied by X-ray diffraction. The four copper(II) atoms locate four capsheaves of a tetrahedral skeletal structure and a oxygen atom as interstitial atom occupies the center position of the same tetrahedron, and each edge of the Cu-Cu tetrahedron is bridged by one ${\mu}_2$-Cl anion. The copper atom possesses slightly distorted trigonal bipyramidal geometry with three ${\mu}_2$-Cl atoms in equatorial position and the interstitial O atom and one N atom from 3-benzyl-benzimidazole ligand occupying axial position. The Cu-Cu distances are in the range of 3.0986-3.1162 ${\AA}$. The EPR spectrum suggested that the copper(II) ground state $d_{x2-y2}$ and the coordination geometry was trigonal bipyramidal.
Object Recognition System of Sonar Image Based on Multiple Invariant Moments and BP Neural Network
Jianning Han,Peng Yang,Lu Zhang 보안공학연구지원센터 2014 International Journal of Signal Processing, Image Vol.7 No.5
Object Recognition System of Sonar Image plays an important role in the field of underwater defense According to pattern recognition theory, principle processes of a typical object recognition system is introduced . To achieve robust performance, image de-noising, sharpening, binary transformation, edge detection and other image processing techniques are discussed . The paper presents a novel object recognition system using multiple invariant moments as the main feature of the object, and the detected feature is trained by BP neural network so that the classification error can be minizied. Finally, we implemented the proposed approach by visual air plane recognition, the experimental results demonstrates the robustness and efficiency of the presented approach.
Effect of Heat Treatment on the Lipophillic Pigments of Fresh Green Tea Liquor
Jian-Liang Lu,Zhan-Bo Dong,Shun-Shun Pan,Chen Lin,Xin-Qiang Zheng,Borthakur Devajit,Yue-Rong Liang 한국식품과학회 2009 Food Science and Biotechnology Vol.18 No.3
Changes in lipophillic pigments concentration and its relation to color of fresh green tea liquor during heat treatment were studied. The results showed liquor greenness decreased markedly with extension of incubation time at 55℃, while the brightness and yellowness changed a little. Significant increase in ‘a’ and ‘b’ values of tea liquor was observed at 95℃. Color change of liquor at 55℃ was accompanied by a decrease in the level of chlorophylls, lutein and neoxanthin, and an increase in the pheophytins and β-carotene levels. However, all pigments except β-carotene decreased with time extension at 95℃. Significant correlation was found between pigments and color difference index. The browning of fresh green tea liquor was attributed to vicissitudes of lipophillic pigments during heat treatment, especially to the change of chlorophylls/pheophytins ratio. Result also showed addition of Zn²? at 1.6 μ㏖/ℓ could partially alleviate the decrease in greenness during heat treatment.
Dynamic analysis of cross shaft type universal joint with clearance
Jian-Wei Lu,Gong-Cheng Wang,Hao Chen,Alexander F. Vakakis,Lawrence A. Bergman 대한기계학회 2013 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.27 No.11
Cross shaft type universal joint is widely used in ground vehicles to transfer torque between two intersecting axes, and its transmission feature can make a great contribution to NVH performance of the vehicle. We looked at the assembling clearance at cross shaft neck, and presented a dynamic model of cross shaft type universal joint with clearance at cross shaft neck. Two-state model is applied to describe the contact force between the cross shaft and driving joint fork based on Hertz theorem, and lumped mass method is applied to build up the dynamic model of the universal joint. Based on this model, numerical analysis is carried out to discuss the transmission feature of the universal joint with clearance at cross shaft neck, and the influence of clearance on the dynamic behavior of the system is evaluated with numerical results based on time history, power spectrum, and phase portrait. The method and conclusions presented are helpful to improvement of the transmission feature of cross shaft type universal joint.
Lu, Zhi-Hao,Yang, Li,Yu, Jing-Wei,Lu, Ming,Li, Jian,Zhou, Jun,Wang, Xi-Cheng,Gong, Ji-Fang,Gao, Jing,Zhang, Xiao-Tian,Li, Jie,Li, Yan,Shen, Lin Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.15
Background: Weight loss during chemotherapy has not been exclusively investigated. Macrophage inhibitory cytokine-1 (MIC-1) might play a role in its etiology. Here, we investigated the prognostic value of weight loss before chemotherapy and its relationship with MIC-1 concentration and its occurrence during chemotherapy in patients with advanced esophageal squamous cell carcinoma (ESCC). Materials and Methods: We analyzed 157 inoperable locally advanced or metastatic ESCC patients receiving first-line chemotherapy. Serum MIC-1 concentrations were assessed before chemotherapy. Patients were assigned into two groups according to their weight loss before or during chemotherapy:>5% weight loss group and ${\leq}5%$ weight loss group. Results: Patients with weight loss>5% before chemotherapy had shorter progression-free survival period (5.8 months vs. 8.7 months; p=0.027) and overall survival (10.8 months vs. 20.0 months; p=0.010). Patients with weight loss >5% during chemotherapy tended to have shorter progression-free survival (6.0 months vs. 8.1 months; p=0.062) and overall survival (8.6 months vs. 18.0 months; p=0.022), and if weight loss was reversed during chemotherapy, survival rates improved. Furthermore, serum MIC-1 concentration was closely related to weight loss before chemotherapy (p=0.001) Conclusions: Weight loss both before and during chemotherapy predicted poor outcome in advanced ESCC patients, and MIC-1 might be involved in the development of weight loss in such patients.
Jian Lu,Suduo Xue,Xiongyan Li 한국강구조학회 2022 International Journal of Steel Structures Vol.22 No.5
Annular crossed cable-truss structure (ACCTS) is a novel fl exible cable-strut tensile structure. Its stiff ness is generated from the prestresses of cables, and the prestresses of cables is mostly controlled by the deformation of cables. So, it is necessary to study the infl uence of cable length errors on ACCTS and the method of solving control criteria of cable length errors. According to sensitive analysis of cable length errors, the sensitive indexes of all kinds of cables are gained, and the infl uences of ear-plate and cable on ACCTS are larger and the infl uences of struts on ACCTS are smaller. Then defi ne ear-plate and cable as sensitivity components, and defi ne strut as non-sensitivity component. Based on sensitive analysis, reliability theory and nonlinear programming theory, the method solving control criteria of cable length errors for ACCTS is proposed. By the method, the control criteria of cable length errors under 4 conditions are studied. The model trial of sensitive analysis of ACCTS with a diameter of 6 m was carried out. The results show that the infl uences of cable length manufacturing errors on ACCTS are solved by sensitive analysis and the proposed method. The distribution of control criteria of cable length errors is uniform, and can meet the requirements of China and US Codes. The trial values are consistent with the simulation values. The results provide the acceptance criteria for ACCTS, which promotes the application of ACCTS in practical engineering.
Jian Son,Hong-Li Wang,Ke-Han Song,Zhi-Wen Ding,Hai-Lian Wang,Xiao-Sheng Ma,Fei-Zhou Lu,Xin-Lei Xia,Ying-Wei Wang,Fei-Zou,Jian-Yuan Jiang 생화학분자생물학회 2018 Experimental and molecular medicine Vol.50 No.-
This study was carried out to explore the roles of circular RNAs (circRNAs) in nucleus pulposus (NP) tissues in intervertebral disc degeneration (IDD). Differentially expressed circRNAs in IDD and normal NP tissues were identified based on the results of microarray analysis. Bioinformatics techniques were employed to predict the direct interactions of selected circRNAs, microRNAs (miR), and mRNAs. CircRNA_104670 was selected as the target circRNA due to its large multiplier expression in IDD tissues. After luciferase reporter and EGFP/RFP reporter assays, we confirmed that circRNA_104670 directly bound to miR-17-3p, while MMP-2 was the direct target of miR-17-3p. The receiver-operating characteristic (ROC) curve showed that circRNA_104670 and miR-17-3p had good diagnostic significance for IDD (AUC circRNA_104670 = 0.96; AUC miRNA-17-3p = 0.91). A significant correlation was detected between the Pfirrmann grade and expression of circRNA_104670 (r = 0.63; p = 0.00) and miR-17-3p (r = −0.62; p = 0.00). Flow-cytometric analysis and the MTT assay showed that interfering with circRNA_104670 using small interfering RNA (siRNA) inhibited NP cell apoptosis (p < 0.01), and this inhibition was reduced by interfering with miR-17-3p. Interfering with circRNA_104670 suppressed MMP-2 expression and increased extracellular matrix (ECM) formation, which were also reduced by interfering with miR-17-3p. Finally, an MRI evaluation showed that circRNA_104670 inhibition mice had a lower IDD grade compared with control mice (p < 0.01), whereas circRNA_104670 and miRNA-17-3p inhibition mice had a higher IDD grade compared with circRNA_104670 inhibition mice (p < 0.05). CircRNA_104670 is highly expressed in the NP tissues of IDD and acts as a ceRNA during NP degradation.