http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Estimation of the medical need for carbon-ion radiotherapy in Korea
Cho, Ilsung,Seo, Young Seok,Jung, WonGyun,Kim, Mi-sook JAPAN RADIATION RESEACH SOCIETY 2018 JOURNAL OF RADIATION RESEARCH Vol.59 No.5
<P><B>Abstract</B></P><P>The Korea Heavy Ion Medical Accelerator project focuses on the development of medical accelerator facilities for delivering carbon-ion beams to cancer patients. The purpose of the present study was to estimate the clinical need for carbon-ion therapy in Korea. Seven tumor sites, namely head and neck, liver, lung, colon and rectum, prostate, bone and soft tissue, and pancreas were selected as eligible sites for receiving carbon-ion radiotherapy (RT) by radiation oncologists of the Korea Institute of Radiological and Medical Sciences. Cancer incidence data for the selected tumor sites were obtained from the Korea National Cancer Incidence Database in order to estimate the potential medical need for carbon-ion RT. The carbon-ion RT adaption rate was assessed based on the clinical experience of other carbon-ion therapy facilities. An estimation model was constructed for estimating the medical need for carbon-ion RT, and from this, 25 606 patients were deemed to be potential candidates for carbon-ion RT. This estimated potential need corresponded to 10% of newly diagnosed cancer patients in Korea. The realistic estimation was calculated as ranging between 4000 and 6300 patients, depending on the carbon-ion RT adaptation rate. This estimated medical need corresponded to 2–3% of newly diagnosed cancer patients in Korea. Taken together, our findings suggest that there is a clear medical need for carbon-ion RT in Korea, with at least 4000 potential patients per year.</P>
김용준(Yongjune Kim),서일성(Ilsung Seo),고일석(Il-Suek Koh),이용식(Yongshik Lee) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.6
본 논문에서는 준등각 맵핑 기반 전자기파 투명화 구조의 산란 단면적(Scattering Cross Section: SCS)을 최소화 시키는 설계 방법을 제시한다. 준등각 맵핑에 기반하여 설계한 전자기파 투명화 구조를 사각형 형태로 잘라낸 뒤 경계면 밖의 굴절률과 내부의 1미만인 굴절률을 자유 공간으로 근사하는 방법을 사용함으로써 구현하기 어려운 굴절률 문제를 해결하였다. 사각형 형태의 크기는 시뮬레이션을 통해 전자기파 투명화 구조를 적용한 마름모형 금속 물체의 산란 단면적이 최소가 되도록 최적화하였다. 설계된 자유 공간형 전자기파 투명화 구조를 3D 프린터를 이용하여 제작, 산란파 저감특성을 전자기장 스캐너를 이용하여 실험적으로 검증하였다. A design method is proposed to minimize the scattering cross section(SCS) of the electromagnetic cloak based on the quasi-conformal mapping. Often times in such cloaking structures, parts that require refractive index below one are approximated with free space because of the difficulty involved with realization. In this process, preformance degradation is inevitable. In this work, the size of the cloak is optimized to compensate for the deterioration, and thus to minimize the scattering cross section of a diamond shaped conductor. Proposed cloak is fabricated using a 3D printer, and verified by measuring the cloaking performance of a diamond shaped aluminum target.
Hydrogen production from steam reforming using an indirect heating method
Ji, Hyunjin,Lee, Junghun,Choi, Eunyeong,Seo, Ilsung Elsevier 2018 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY - Vol.43 No.7
<P><B>Abstract</B></P> <P>In this work, a methanol steam reforming (MSR) reactor was operated using an indirect heating method. A thermal circuit was constructed between the MSR reactor and the electrical heater to supply the heat required for the endothermic reaction, and deionized water was used as the heat transfer medium (HTM). The MSR reactors featured a shell-and-tube type design to operate at high pressures. A Cu/Zn catalyst was installed on the tube side, and HTM was supplied to the shell side. To improve the heat transfer performance, the heat transfer area between the shell and tube was increased from 598 to 1117 cm<SUP>2</SUP>. Because the MSR reactor had a sufficient heat exchange area corresponding to the catalytic reaction rate, the heat exchange area had little effect on methanol conversion. However, the heat exchange area had a greater effect on the performance because the operating temperature of reactor was lower. Under the same operating temperature conditions, the MSR reactor operated under the indirect heating method showed relatively higher methanol conversion than the MSR reactor operated in an electric furnace because of the effective heat transfer by the latent heat of saturated steam. The MSR reactor based on the indirect heating method was continuously operated at 250 °C for 72 h to verify characteristic start-up and operation. The results showed that the MSR reactor could be operated at a constant temperature; however, low methanol conversion at low operating temperatures led to slow catalyst degradation. In addition, the MSR reactor required more than 2 h for initial start-up and for restart after emergency shutdown because the HTM needed to be evaporated and pressurized to the target pressure.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The methanol steam reforming (MSR) reactor featured a shell-and-tube type design. </LI> <LI> The MSR reactor was operated between 250 and 280 °C by indirect heating method. </LI> <LI> The saturated steam used as the heat transfer medium supplied heat to MSR reactor. </LI> <LI> The MSR reactor operated under the indirect heating method showed relatively higher methanol conversion. </LI> <LI> The MSR reactor based on the indirect heating method was continuously operated at 250 °C for 72 h. </LI> </UL> </P>
표면 전류를 기반으로 한 유한 배열 I-모양 메타물질의 TM 편파 전자기 산란 모델
장지웅(Ji-woong Jang),이해승(Haeseung Lee),고일석(Il-suek Koh),서일성(Ilsung Seo),이용식(Yongshik Lee) 한국전자파학회 2014 한국전자파학회논문지 Vol.25 No.6
일반적으로 메타물질의 성질은 무한히 배열된 단위 셀 구조로 해석한다. 그러나 실제 응용 구조의 설계/구현 과정에서 메타물질은 유한하게 배열할 수밖에 없고, 유한 배열의 효과를 해석하는 방법이 필요하다. 본 논문에서는 유한한 대형 배열 메타물질 구조의 산란 특성을 full-wave 해석 없이 계산하기 위한 방법을 제안하였다. 제안한 모델은 다음과 같다. TM 편파에 대해 유한히 배열한 메타물질 구조의 표면 전류와 무한 배열 표면 전류 비를 4차 다항식으로 근사하였다. 다항식의 계수를 금속 패치의 물리적 길이에 대한 함수로 계산하여, 임의의 I-모양 메타물질이 균일하게 배열된 유한배열 구조의 전류 분포를 쉽게 계산할 수 있다. 그리고 제안된 전류 분포 모델을 기반으로 예측한 표면 전류를 통해 유한한 메타물질 배열 구조의 산란파를 계산하였다. 또, 제안한 모델을 이용하여 계산한 레이더 반사 단면적(Radar Cross Section: RCS)을 측정 결과와 비교함으로써 제안한 모델의 정확도를 실험적으로 확인하였다. Generally, the properties of metamaterials are analyzed based on the infinite array of the unit cells. In real application of the metamaterial, however, the array has to be finite. Hence, it is important that a method can analyze the effect of the finite array of the metamaterial. In this paper, a model is proposed which can calculate the scattering by a large-size finite array of an I-shaped metamaterial without a full-wave simulation. The proposed model is based on the surface current estimation of each unit cells. The ratio of the current distribution on a finite array of the metamaterial to that of the infinite array of the same metamaterial for a TM polarized incident wave is approximated as a quartic polynomial. The coefficients of the polynomial are a function of the physical dimension of the metallic patch. Hence, the current distribution of the finite metamaterial can be estimated based on the proposed polynomial and the current of the infinite array. The scattered field is calculated by using the surface current model. The proposed model is numerically and experimentally verified by comparing calculated and measured RCS(Radar Cross Section) data.