http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서희원,안재홍,최동호,Seo. Hee Won,An. Jae Hong,Choi. Dong Ho 한국방재학회 2013 한국방재학회논문집 Vol.13 No.5
화재시 건물내의 화재확산방지를 위해서 개구부에는 방화문이 설치된다. 외국에서는 방화문이 설치되는 부위의 내화성능 등을 고려하여 20분~180분의 방화문을 구분하여 적용하고 있으나, 국내에서는 일률적으로 1시간의 차염 성능만을 적용토록 하고 있어 화재시 충분한 화재확산방지를 기대하기 어렵다. 이에 국내에서도 방화문이 적용되는 위치에 따라 요구되는 내화성능을 강화하고, 차열성능을 확보토록 제도를 개선하여야 할 필요성이 있으며, 이를 위해서는 기존 방화문의 성능 검증이 선행되어야 한다. 이에 본 연구에서는 제도 개선을 위한 기초자료로 활용하기 위하여 방화문으로 널리 사용되는 철제 방화문의 코어재 종류에 따른 내화성능을 평가하였으며 대부분의 시험체가 차염 성능을 확보하고, 코어재에 따라 10분 안팎의 차열 성능을 확보하고 있음을 확인하였다. Fire doors are installed on the openings in buildings to protect fire spreading in the event of fire. In foreign countries, fire doors whose fire resistance performance is from 20 minutes to 180 minutes are installed depending on required fire resistance performance of where fire doors are installed. But, in Korea, it is difficult to protect fire spreading in the event of fire because fire doors only having integrity of 1 hour are installed regardless of the position of fire doors. Therefore, it is needed to improve the system related to fire doors by strengthening the required fire resistance performance depending on where fire doors are installed and introducing insulation performance. To do so, the performance verification of the existing fire doors must be done first. In this study, fire resistance performance of the steel fire doors which are used widely depending on core material was evaluated. As a result, most specimens had the integrity performance and secured insulation performance of around 10 minutes depending on core material.
서희원(Hee Won Seo),한창수(Chang-Soo Han),이종홍(Jong-Hong Lee),송진원(Jin-Won Song),이응숙(Eung-Sug Lee) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
We fabricated a sensor device for nanomaterials by dielectrophoresis. We used applied voltage and frequency to align of individual nanomaterial. And then, it was deposited to Pt metal at contact point of electrode and nanomaterial by focused-ion beam for decreased contact resistance. Among nanodevices, we used SWNT device for NO₂ gas sensing. All of experiments are occurred in several seconds at a room temperature. The morphology of nanosensor was observed by scanning electron microscope. The performance of the sensor was obtained by current-voltage measurement.
ANSYS와 MS Excel을 이용한 볼트 체결부의 VDI 2230 기반 구조 해석 및 평가 자동화 도구
서희원(Hee Won Seo),김민근(Min-Geun Kim),이한민(Hanmin Lee),한정삼(Jeong Sam Han) 대한기계학회 2020 大韓機械學會論文集A Vol.44 No.2
기계 구조물 간 결합에는 볼트 체결이 주로 사용되며, 기계 구조물의 파손 가능성 및 소음 등의 문제를 최소화하고 성능을 유지하도록 설계 시, 볼트의 형상 및 위치, 재질, 체결력, 외부 하중 등의 다양한 영향 인자를 고려한다. 볼트 체결부의 설계 시 이러한 영향 인자 변화에 따른 반복적인 평가가 필요하므로 유한요소 해석 기법을 적용하는 것이 효과적이다. 본 논문은 다양한 영향 인자 변화에 따른 볼트 체결부의 반복적인 구조 해석 및 평가에 활용하도록 ANSYS MAPDL을 기반으로 Microsoft Excel 및 Visual Basic을 이용한 UI 환경과 연계한 자동화 도구를 설명한다. 이 자동화 도구는 입력 변수에 따라서 볼트 체결부의 유한요소 모델링 및 구조 해석을 자동적으로 수행하고, 그 결과는 VDI 2230 규격을 기준으로 평가된다. 끝으로 적용 예제를 통하여 본 자동화 도구를 검증하였다. Bolted joints are mainly used for the fastening of mechanical structures. They should be designed to minimize failure and noise and to maintain a high level of performance by considering various design parameters such as bolt dimensions, positions, materials, bolt pre-tensions, external loads, etc. For this purpose, it is effective to use finite element analysis because repeated performance evaluations while varying the design parameters is necessary to complete the design of the bolt fastener. This paper describes an automation tool developed for use in the repeated structural analysis and evaluation of bolted joints under the influence of various factors. The automation tool is based on ANSYS APDL (ANSYS parametric design language) and is developed in conjunction with a UI environment using Microsoft Excel and Visual Basic. It automatically performs the finite element modeling and structural analysis of the bolted joints according to the input variables, and the results are evaluated based on the VDI 2230 standard. Finally, the performance of the automation tool was verified through the application examples.
서희원(Seo, Hee-Won),성시창(Sung, Si-Chang),최동호(Choi, Dong-Ho),김대회(Kim, Dae-Hoi),박수영(Park, Soo-Young) 한국화재소방학회 2010 한국화재소방학회 학술대회 논문집 Vol.2010 No.춘계
방화댐퍼는 방화구획을 관통하는 덕트에 설치되어 화염의 전파 및 연소확대를 방지하도록 하는 방화설비로서 '건축물의 피난 방화구조 등의 기준에 관한 규칙'에서 구조 및 시험기준에 대해서 규정하고 있으나, 정해진 성능기준이 없으며 방화설비에 있어 가장 중요한 내화성능에 대해서 언급이 없는 등 개정이 필요하다. 본 연구에서는 방화댐퍼의 'KS F2840(방화댐퍼의 내화시험방법)'시험에 대해서 소개하고, 방화댐퍼의 내화시험 사례를 통해 성능 평가방법으로서의 적용 타당성을 검토하였다.