A 5.6 kW 11.7 kW per kg Four-Phase Interleaved Buck Converter for the Unmanned Aerial Vehicle

Cheng Xu-Feng,Peng Zhenzhen,Yang Yulong,Liang Zhimin,Wu Chaofeng,Shao Zhiwei,Wang Dianlong 대한전기학회 2022 Journal of Electrical Engineering & Technology Vol.17 No.2

This paper proposed a 5.6 kW 11.7 kW/kg four-phase interleaved buck converter (FPIBC) for the unmanned aerial vehicle (UAV) low-voltage power system. The UAV mainly concerns the lightweight strategy and the power density of the DC-DC converter. We proposed a comprehensive lightweight strategy with the characteristics of reduced inductor current ripples, small size of fi lter inductors and capacitors, and high output power. The output current ripples are reduced by using interleaved modulation strategy and integrated CLC fi lters cascaded to the input side and output side respectively. In addition, the aluminum based printed circuit board (PCB) is used with SMD power transistors to obtain better heat dissipation capability without fans. With abovementioned methods, the designed DC-DC converter has a power of 5.6 kW @ 0.48 kg, the powerto-weight ratio is improved to be 11.7 kW/kg, and the power density is 3 W/cm 3 . The effi ciency of this DC-DC converter is up to 95.8%.

Enhancing the Anaerobic Digestion of Corn Stalks Using Composite Microbial Pretreatment

( Xu Feng Yuan ),( Pei Pei Li ),( Hui Wang ),( Xiao Fen Wang ),( Xu Cheng ),( Zong Jun Cui ) 한국미생물 · 생명공학회 2011 Journal of microbiology and biotechnology Vol.21 No.7

A composite microbial system (XDC-2) was used to pretreat and hydrolyze corn stalk to enhance anaerobic digestion. The results of pretreatment indicated that sCOD concentrations of hydrolysate were highest (8,233 mg/l) at the fifth day. XDC-2 efficiently degraded the corn stalk by nearly 45%, decreasing the cellulose content by 22.7% and the hemicellulose content by 74.1%. Total levels of volatile products peaked on the fifth day. The six major compounds present were ethanol (0.29 g/l), acetic acid (0.55 g/l), 1,2-ethanediol (0.49 g/l), propionic acid (0.15 g/l), butyric acid (0.22 g/l), and glycerine (2.48 g/l). The results of anaerobic digestion showed that corn stalks treated by XDC-2 produced 68.3% more total biogas and 87.9% more total methane than untreated controls. The technical digestion time for the treated corn stalks was 35.7% shorter than without treatment. The composite microbial system pretreatment could be a cost-effective and environmentally friendly microbial method for efficient biological conversion of corn stalk into bioenergy.

Influence of FeSe doping on superconducting properties of MgB2 by hybrid microwave method

Cheng Cheng,Zhenjie Feng,Qing Li,Xu Wang,Chuan Yu,Hao Chu,Ya Yang,Changqin Liu,Yiming Cao,Zhe Li,Jingzhe Chen,Chao Jing,Shixun Cao,Jincang Zhang 한국물리학회 2017 Current Applied Physics Vol.17 No.11

The effect of FeSe doping on the physical properties of MgB2 is studied. Bulk samples of the FeSe doped MgB2 with weight ratio x ðFeSe : MgB2Þ ¼ 0%; 3%; 7% and 10% were prepared by hybrid microwave method. It is proved that FeSe is not stable together with MgB2. Fe2þ enters into MgB2 lattice, some Mg2þ and Se2『 are combined into the new impurity compound MgSe. The superconducting transition temperature (Tc) slightly decreased with increasing doping content of FeSe from R-T and M-T curves, which results from the substitution of Mg2þ by Fe2þ in the MgB2 lattice. The Jc increase slightly with the FeSe doping content increasing from 3 wt % to 10 wt %, which results from the increasing MgSe impurity pinning centers.

Molecular Cloning and Function Analysis of an Anthocyanidin Synthase Gene from Ginkgo biloba, and Its Expression in Abiotic Stress Responses

Feng Xu,Hua Cheng,Rong Cai,Lin Ling Li,Jie Chang,Jun Zhu,Feng Xia Zhang,Liu Ji Chen,Yan Wang,Shu Han Cheng,Shui Yuan Cheng 한국분자세포생물학회 2008 Molecules and cells Vol.26 No.6

Anthocyanidin synthase (ANS, leucoanthocyanidin oxygenase), a 2-oxoglutarate iron-dependent oxygenase, catalyzed the penultimate step in the biosynthesis of the anthocyanin class of flavonoids, from the colorless leucoanthocyanidins to the colored anthocyanidins. The full-length cDNA and genomic DNA sequences of ANS gene (designated as GbANS) were isolated from Ginkgo biloba for the first time. The full-length cDNA of GbANS contained a 1062-bp open reading frame (ORF) encoding a 354-amino-acid protein. The genomic DNA analysis showed that GbANS gene had three exons and two introns. The deduced GbANS protein showed high identities to other plant ANSs. The conserved amino acids (H-X-D) ligating ferrous iron and residues (R-X-S) participating in 2-oxoglutarate binding were found in GbANS at the similar positions like other ANSs. Southern blot analysis indicated that GbANS belonged to a multi-gene family. The expression analysis by real-time PCR showed that GbANS expressed in a tissue-specific manner in G. biloba. GbANS was also found to be up-regulated by all of the six tested abiotic stresses, UV-B, abscisic acid, sucrose, salicylic acid, cold and ethylene, consistent with the promoter region analysis of GbANS. The recombinant protein was successfully expressed in E. coli strain with pET-28a vector. The in vitro enzyme activity assay by HPLC indicated that recombinant GbANS protein could catalyze the formation the cyanidin from leucocyanidin and conversion of dihydroquercetin to quercetin, suggesting GbANS is a bifunctional enzyme within the anthocyanidin and flavonol biosynthetic pathway.

Differential microRNA Expression by Solexa Sequencing in the Sera of Ovarian Cancer Patients

Ji, Ting,Zheng, Zhi-Guo,Wang, Feng-Mei,Xu, Li-Jian,Li, Lu-Feng,Cheng, Qi-Hui,Guo, Jiang-Feng,Ding, Xian-Feng Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.4

MicroRNAs are a class of small noncoding RNA which play important regulatory roles in a variety of cancers. MiRNA-specific expression profiles have been reported for several pathological conditions. In this study, we combined large scale parallel Solexa sequencing to identify 11 up-regulated miRNAs and 19 down-regulated miRNAs with computational techniques in the sera of ovarian cancer patients while using healthy serum as the control. Among the above, four miRNAs (miR-22, miR-93, miR-106b, miR-451) were validated by quantitative RT-PCR and found to be significantly aberrantly expressed in the serum of ovarian cancer patients (P<0.05). There were no significant differences between samples from cancer stage I/II and III/IV. However, the levels of miR-106b (p=0.003) and miR-451 (p=0.007) were significantly different in those patients under and over 51 yearsof age. MiR-451 and miR-93 were also specific when analyzed with reference to different levels of CA125. This study shows that Solexa sequencing provides a promising method for cancer-related miRNA profiling, and selectively expressed miRNAs could be used as potential serum-based biomarkers for ovarian cancer diagnosis.

Dephasing Effect on the Carrier-light Interaction in Terahertz Quantum Cascade Lasers

Feng Wang,Xu Guang Guo,Jun Cheng Cao 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.58 No.41

We study the dephasing effect on the carrier-light interaction in terahertz quantum cascade lasers by using a rate-equation method including the optical field. The time evolution of the gain coefficient and the stimulated radiation rate are shown. We theoretically provide an ultrafast microscopic process for the conversion of a working terahertz quantum cascade laser from an unsaturated to a saturated state.

Identification of mountain-cultivated ginseng and cultivated ginseng using UPLC/oa-TOF MSE with a multivariate statistical sample-profiling strategy

Xu, Xin-fang,Cheng, Xian-long,Lin, Qing-hua,Li, Sha-sha,Jia, Zhe,Han, Ting,Lin, Rui-chao,Wang, Dan,Wei, Feng,Li, Xiang-ri The Korean Society of Ginseng 2016 Journal of Ginseng Research Vol.40 No.4

Background: Mountain-cultivated ginseng (MCG) and cultivated ginseng (CG) both belong to Panax ginseng and have similar ingredients. However, their pharmacological activities are different due to their significantly different growth environments. Methods: An ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS/MS)-based approach was developed to distinguish MCG and CG. Multivariate statistical methods, such as principal component analysis and supervised orthogonal partial-least-squares discrimination analysis were used to select the influential components. Results: Under optimized UPLC-QTOF-MS/MS conditions, 40 ginsenosides in both MCG and CG were unambiguously identified and tentatively assigned. The results showed that the characteristic components of CG and MCG included ginsenoside Ra3/isomer, gypenoside XVII, quinquenoside R1, ginsenoside Ra7, notoginsenoside Fe, ginsenoside Ra2, ginsenoside Rs6/Rs7, malonyl ginsenoside Rc, malonyl ginsenoside Rb1, malonyl ginsenoside Rb2, palmitoleic acid, and ethyl linoleate. The malony ginsenosides are abundant in CG, but higher levels of the minor ginsenosides were detected in MCG. Conclusion: This is the first time that the differences between CG and MCG have been observed systematically at the chemical level. Our results suggested that using the identified characteristic components as chemical markers to identify different ginseng products is effective and viable.

Improvement on the Laminated Busbar of NPC Three-Level Inverters based on a Supersymmetric Mirror Circulation 3D Cubical Thermal Model

Feng-You He,Shi-Zhou Xu,Cheng-Fei Geng 전력전자학회 2016 JOURNAL OF POWER ELECTRONICS Vol.16 No.6

Laminated busbars with a low stray inductance are widely used in NPC three-level inverters, even though some of them have poor performances in heat equilibrium and overvoltage suppression. Therefore, a theoretical method is in need to establish an accurate mathematical model of laminated busbars and to calculate the impedance and stray inductance of each commutation loop to improve the heat equilibrium and overvoltage suppression performance. Firstly, an equivalent circuit of a NPC three-level inverter laminated busbar was built with an analysis of the commutation processes. Secondly, on the basis of a 3D (three dimensional) cubical thermal model and mirror circulation theory, a supersymmetric mirror circulation 3D cubical thermal model was built. Based on this, the laminated busbar was decomposed in 3D space to calculate the equivalent resistance and stray inductance in each commutation loop. Finally, the model and analysis results were put into a busbar design, simulation and experiments, whose results demonstrate the accuracy and feasibility of the proposed method.

Topology Optimization Method of Lattice Structures Based on a Genetic Algorithm

Feng Ruo-qiang,Liu Feng-cheng,Xu Wei-jia,Liu Yang 한국강구조학회 2016 International Journal of Steel Structures Vol.16 No.3

A two-stage topology optimization method of lattice structures based on a genetic algorithm is proposed. The first stage is the form-finding analysis of lattice structures, and the optimal initial shape was achieved with the numerical inverse hanging method. The second stage is the topology optimization of single-layer lattice structures, which can be realized by changing the mesh size and the tube configurations to minimize the total weight of steel tubes subject to the design requirements. The mesh configuration optimization is realized through the adjustment of the nodal horizontal co-ordinates and the removal of tubes with lower stress. The maximum displacement of the structure, the maximum stress of the circular steel tubes, and the nonlinear buckling load are the state variables, and a genetic algorithm (GA) is the optimization algorithm. Different stress-limiting values used to delete the tubes were discussed. The numerical examples show that the two-stage topology optimization method for lattice structures proposed in this paper is correct and efficient. Furthermore, the forms of the optimized structure are rich, and the structure is lightweight and efficient.

Autonomous Defense of Unmanned Aerial Vehicles Against Missile Attacks Using a GRU-Based PPO Algorithm

Cheng Zhang,Chengyang Tao,Yuelei Xu,Weijia Feng,Jarhinbek Rasol,Tian Hui,Liheng Dong 한국항공우주학회 2024 International Journal of Aeronautical and Space Sc Vol.25 No.3

This paper introduces a method enabling unmanned aerial vehicles (UAVs) to autonomously defend themselves against incoming missiles during military missions. A simulation environment for UAV defense against incoming missiles was created by constructing motion models for a UAV, a missile, and infrared decoys in three-dimensional space. A UAV defense strategy generation algorithm based on gated recurrent unit (GRU) and proximal policy optimization (PPO) is proposed, which effectively addresses the problem of low survival rates when under attack from enemy missiles. Specifically, the algorithm estimates the current true state based on current and historical observations and makes decisions based on the state estimate, effectively solving the non-Markov problem caused by the lack of infrared decoy information in the observations. The experimental results indicate that this method provides an effective defense strategy, combining evasion maneuvers with infrared decoys to effectively evade incoming missiles.