One new species and one new record species of Cerapteroceroides Ashmead (Hymenoptera: Encyrtidae) from China

Guo‐Hao Zu,Cheng-De LI 한국곤충학회 2017 Entomological Research Vol.47 No.5

Cerapteroceroides acutiscapus sp. nov. is described as new and Cerapteroceroides manaliensis Hayat and Khan, 2015 is first recorded from China.

Two new species and one new record species of Rhopus (Hymenoptera: Encyrtidae) from China, with a key to Chinese species

Guo‐Hao Zu,Cheng-De LI 한국곤충학회 2015 Entomological Research Vol.45 No.5

Rhopus antennalis sp. nov. and R. qingdaoensis sp. nov. are described as new to science and R. nigroclavatus (Ashmead, 1902) is first recorded from China. A key to all the known Chinese species of the genus also presented.

Effects of Quenching Methods and Aging Processes on the Crushing Properties and Microstructure of Al–Zn–Mg Alloy Thin-Walled Square Extrusions

Hui Guo,Jin Zhang,Cheng Wang,Yun‑lai Deng 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8

In this study, the effects of different (online quenching and offline quenching) quenching methods and aging processes (T6and T73) on the crashworthiness and microstructural evolution of three Al–Zn–Mg alloys (G1–G3) were studied by conductingtensile test and axial compression tests at room temperature, combined with optical metallography, electron back scattereddiffraction, and transmission electron microscopy microstructural observations. The obtained results revealed that thecrushing properties of three different Al–Zn–Mg alloys subjected to different quenching methods and aging processes weresignificantly different. Their crushing energy absorption of are ranked as follows: G1 > G3 > G2. The highest total energyabsorption gap (between T6 and T73) is the G1 alloy, and the lowest one is the G3 alloy. The largest total energy absorptiongap between the two quenching methods is the G3 alloy, and the smallest one is the G1 alloy. The G2 alloy with the largesttotal amount of Zn + Mg has the highest number density of matrix precipitates, the largest precipitate gap (between T6 andT73) and the smallest precipitate gap between the two quenching methods. The G3 alloy with the largest Zn/Mg ratio hasthe smallest number density of matrix precipitates, the minimum precipitation gap (between T6 and T73) and the maximumprecipitation gap between the two quenching methods. The G1 alloy with the lowest Zn/Mg ratio has the smallest size ofgrain boundary precipitates and PFZ width, while their largest values are obtained for the G3 alloy with the maximum Zn/Mg ratio. As a crushing resistant structural material, the crushing properties is improved without reducing the strength. Theratio of Zn/Mg should be controlled within the range of 4.57–6.15, while the total amount of Zn + Mg should be controlledwithin the range of 6.18–7.01.

In Vitro Screening for Compounds Derived from Traditional Chinese Medicines with Antiviral Activities Against Porcine Reproductive and Respiratory Syndrome Virus

( Jia Cheng ),( Na Sun ),( Xin Zhao ),( Li Niu ),( Mei Qin Song ),( Yao Gui Sun ),( Jun Bing Jiang ),( Jian Hua Guo2 ),( Yuan Sheng Bai ),( Jun Ping He ),( Hong Quan Li ) 한국미생물 · 생명공학회 2013 Journal of microbiology and biotechnology Vol.23 No.8

Seventeen compounds derived from traditional Chinese medicines (TCMs) were tested for their antiviral activity against porcine reproductive and respiratory syndrome virus (PRRSV) in vitro. Visualization with the cytopathologic effect (CPE) assay and the 3-(4, 5-dimethyithiazol- 2-yl)-2,5-diphenyltetrazolium bromide test were used to determine the 50% cytotoxic concentration (CC50) and 50% effective concentration (EC50) in cultured Marc-145 cells. Among the tested compounds, chlorogenic acid and scutellarin showed potential anti-PRRSV activity. The EC50 values were 270.8 ± 14.6 μg/ml and 28.21 ± 26.0 μg/ml and the selectivity indexes were >5.54 and 35.5, respectively. The time-of-addition and virucidal assay indicated that the anti-PRRSV activity of the two compounds could be due to their inhibiting the early stage of virus replication and/or inactivating the virus directly. The inhibition of the virus attachment was not observed in the adsorption inhibition assay. The inhibition ratios of chlorogenic acid and scutellarin were, respectively, 90.8% and 61.1% at the maximum non-cytotoxic concentrations. The results have provided a basis for further exploration of their antiviral properties and mechanisms in vivo. We believe that the chlorogenic acid and scutellarin have a great potential to be developed as new anti-PRRSV drugs for clinical application.

DNA Repair Gene Polymorphisms Do Not Predict Response to Radiotherapy-Based Multimodality Treatment of Patients with Rectal Cancer: a Meta-analysis

Guo, Cheng-Xian,Yang, Guo-Ping,Pei, Qi,Yin, Ji-Ye,Tan, Hong-Yi,Yuan, Hong Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.2

Background: A number of association studies have been carried out to investigate the relationship between genetic polymorphisms in DNA repair genes and response to radiotherapy-based multimodality treatment of patients with rectal cancer. However, their conclusions were inconsistent. The objective of the present study was to assess the role of DNA repair gene genetic polymorphisms in predicting genetic biomarkers of the response in rectal cancer patients treated with neoadjuvant chemoradiation. Materials and Methods: Studies were retrieved by searching the PubMed database, Cochrane Library, Embase, and ISI Web of Knowledge. We conducted a meta-analysis to evaluate the association between genetic polymorphisms and the response in rectal cancer treated with neoadjuvant chemoradiation by checking odds ratios (ORs) and 95% confidence intervals (CIs). Results: Data were extracted from 5 clinical studies for this meta-analysis. The results showed that XRCC1 RS25487, XRCC1 RS179978, XRCC3 RS861539, ERCC1 RS11615 and ERCC2 RS13181 were not associated with the response in the radiotherapy-based multimodality treatment of patients with rectal cancer (p>0.05). Conclusions: This study shows that DNA repair gene common genetic polymorphisms are not significantly correlated with the radiotherapy-based multimodality treatment in rectal cancer patients.

Microstructure control of Fe catalyst films for the growth of multiwalled carbon nanotube arrays

Guo-an Cheng,Hua-ping Liu,Rui-ting Zheng,Yong Zhao,Chang-lin Liang 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.52 No.-

Fe catalyst films were deposited on silicon substrates by using a metal vapor vacuum arc (MEVVA) ion deposition system for the growth of aligned multiwalled carbon nanotubes. The effects of deposition angle and film thickness on the morphologies of catalyst films before and after thermal treatment were investigated. The results show that the uniformities of both 5-nm and 10-nm films are enhanced as the deposition angle decreases. With increase from 5 nm to 10 nm, the surface uniformities of pristine films prepared at higher deposition angles (60˚ and 90˚) are increased, while that of the films produced at 30˚ deposition angle is slightly decreased. The uniformity of Fe catalyst particle sizes after thermal treatment on the whole, clearly decreases as the thickness is increased from 5 nm to 10 nm in the case of the same deposition angle. 5-nm films deposited at 30˚ deposition angle show the most uniform features before and after thermal treatment and can be used for the synthesis of high-quality carbon nanotube arrays. Fe catalyst films were deposited on silicon substrates by using a metal vapor vacuum arc (MEVVA) ion deposition system for the growth of aligned multiwalled carbon nanotubes. The effects of deposition angle and film thickness on the morphologies of catalyst films before and after thermal treatment were investigated. The results show that the uniformities of both 5-nm and 10-nm films are enhanced as the deposition angle decreases. With increase from 5 nm to 10 nm, the surface uniformities of pristine films prepared at higher deposition angles (60˚ and 90˚) are increased, while that of the films produced at 30˚ deposition angle is slightly decreased. The uniformity of Fe catalyst particle sizes after thermal treatment on the whole, clearly decreases as the thickness is increased from 5 nm to 10 nm in the case of the same deposition angle. 5-nm films deposited at 30˚ deposition angle show the most uniform features before and after thermal treatment and can be used for the synthesis of high-quality carbon nanotube arrays.

Bicluster and Pathway Enrichment Analysis of HCV-induced Cirrhosis and Hepatocellular Carcinoma

Cheng, Peng,Cheng, You,Su, Mei X.,Li, Dong,Zhao, Guo Z.,Gao, Hui,Li, Yan,Zhu, Jie Y.,Li, Hua,Zhang, Tao Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.8

Background: Hepatocellular carcinoma (HCC) is the sixth most common cancer worldwide and the most common form of liver cancer. However, while it is associated frequently with hepatitis C virus (HCV) there is only an elementary understanding of its molecular pathogenesis. Methods: To gain insight into the molecular mechanisms of HCV-induced hepatocarcinogenesis, we performed microarray analysis on 75 surgical liver samples from 48 HCV-infected patients. Results: There were 395 differentially expressed geness between cirrhotic samples and HCC samples. Of these, 125 genes were up-regulated and 270 genes were down-regulated. We performed pathway enrichment analysis and screened as described previously. Conclusions: The differentially expressed genes might be involved in hepatocarcinogenesis through upregulating the pathways of ECM-receptor interaction, focal adhesion, cell adhesion molecules and other cancer-related pathways, and downregulating the pathways of "complement and coagulation cascades". We hope our results could aid in seeking of therapeutic targets for HCV-induced hepatocellular carcinoma.

Construction of Z-scheme W18O49/NiAl-LDH heterojunction with photothermal effect for photocatalytic reduction of CO2

Cheng Xia,Rui-Tang Guo,Zhen-rui Zhang,Chen-yuan Fan,Yu-zhe Liu,Yu-cheng Lin,Chu-fan Li,Wei-Guo Pan 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.128 No.-

Recently, the photocatalytic CO2 reduction technology is an effective solution to remit the energy crisis. Inorder to improve the photocatalytic performance, Z-scheme W18O49/NiAl-LDH composite catalysts wereprepared by hydrothermal method. Fortunately, the prepared catalysts revealed excellent photocatalyticperformance under the simulated sunlight, and CO and CH4 could be detected in the reduction products. WO/LDH-0.5 catalyst possessed the optimal activity, with CO and CH4 yield of 37.09 and 8.01 lmol g-1h1separately, which were 7.9 and 3.6 times that of NiAl-LDH monomer. In addition, W18O49 endowedW18O49/NiAl-LDH catalysts with photothermal effect, which raised the surface temperature andfacilitated the catalytic reaction. Meanwhile, the Z-scheme heterojunction composed of flower-likeNiAl-LDH and urchin-like W18O49 accelerated the separation of photoexcited carriers and enhanced theredox ability. Through a series of characterizations and investigations, this work is promising to breaknew ground for the design of photocatalysts with photothermal effect.

EXPERIMENTAL STUDY ON A NOVEL DEFROST CYCLE FOR AIR SOURCE HEAT PUMP

Guo, Xian-Min,Wang, Ya-Jing,Fu, Wen-Cheng,Tao, Xiang-Cheng The Society of Air-Conditioning and Refrigerating 2010 International Journal Of Air-Conditioning and Refr Vol.18 No.1

On the basis of the hot-gas bypass defrost cycle, a new defrost method for air source heat pump is proposed. In the new defrost cycle, the outdoor heat exchanger is divided into two parts which are connected by a capillary tube. The front and rear parts of the heat exchanger are used as the evaporator and condenser respectively during defrosting, and can be defrosted orderly by using the four-way valve. The defrosting performance of the new cycle is investigated experimentally and the results are compared with that of the reverse-cycle defrost system. The experimental results indicate that the energy is used more efficiently in the new defrost cycle, therefore, the defrosting duration and losses are less than those of the reverse-cycle defrost system. Moreover, it does not extract heat from the indoor space during defrosting in terms of the new defrost cycle. Compared with the reverse-cycle defrost system, it is found that the switching times of the four-way valve in the new defrost system are the same, and the fluctuation of the discharge and suction pressures during the defrosting is much less than that in the reverse-cycle defrosting, hence, the mechanical impact on the system is much less.

A novel method for identifying rotor-stator rubbing positions using the cepstrum analysis technique

Guo Chen,Yong-Quan Liu,Guang-Yi Jiang,Cheng-Gang Li,Guo-Quan Feng,De-You Wang 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.9

A novel method of aero-engine rubbing positions identification based on cepstrum analysis is proposed, and the transfer path characteristicswhich reflect the transfer characteristics information from rubbing points to casing measuring points are separated from the vibrationacceleration signals of casing by means of cepstrum analysis. Therefore, there is different transfer characteristics information atdifferent rubbing positions, and in view of this, twenty rubbing positions identification features from the cepstrum are extracted. A largenumber of rubbing experiments of different positions are simulated with the rotor experiment rig of aero-engine, and the characteristicanalysis of experimental samples at different rubbing positions is carried out, and the results indicate the consistency of features to thesame rubbing position and the difference of the features to the different rubbing positions. Finally, the aero-engine rubbing positionsidentification is carried out using the nearest neighbor classification method, the recognition rate reaches 100%, and the effectiveness ofthe method is full verified.