ION IRRADLATION STUDIES OC CARGON FILMS PREPARED BY PLASMA ASSISTED CVD METHOD

Bhattacharyya, Bhattacharyya, Somnath-,Sayeed, Ahmed,Kanjilal, Kanjilal, D.,Subramanyam, S.V 한국재료학회 1995 Fabrication and Characterization of Advanced Mater Vol.1 No.3

Amorphous hydrogeneted carbon films were prepared by plasma assisted cvd metnod and their dc conductivity as studied as a function of temperature in the range of 300K to 10K. Films were then subjected to high energy(170MeV)$I^{+13}$ ion irradiation. After irradiation an marked change was observed in the conductivity and its temperature dependenc. The conductivity decreased by 2 to 3 orders of magnitude, room temperature activation energy increased and a gap appeared in the electronic structure. Photo-emission spectropic study on the material show a decrease in the $\pi$ states of the electronic density of states spectrum from UPS and a noticible change in the Cls peak shape in XPS.

Insecticidal Efficacy of Porteresia coarctata (Roxb.) on Bio-chemical Alteration of Spodoptera litura (Fab.)

Bhattacharyya Atanu,Goswami Arunava,Dihidar Shankar,Adhikari Sujit,Banerjee Sudip Kumar,Talapatra Soumendra Nath,Barik Bikas Ranjan,Bhattacharya Subir Kumar,Chandra Asit Kumar Korean Society of Sericultural Science 2007 International Journal of Industrial Entomology Vol.14 No.1

Hexane extract of Porteresia coarctata (Roxb.) exhibits a toxic effect on the tissues of Spodoptera litura (F) while fed at the dose of 1000 and 2000 ppm thoroughly mixing with castor leaves (Ricinus communis L) after dissolving in DMSO at late fourth instar whereas only DMSO treated castor leaves were fed to control group. The larvae were put to rear at $28^{\circ}C{\pm}1^{\circ}C$, $76{\pm}4%$ R.H. under 12 L + 12 D photoperiodic regime. In test group insects substantial reduction of protein and DNA content was marked in fat body and midgut tissues compared to DMSO treated control group. The significant biochemical alterations in the midgut tissues and fat body of test group insects indicate the insecticidal property of the said plant extract that could be tested in facilitating the phenomenal stride in Integrated Pest Management.

Modulation of 3D Bioprintability in Polysaccharide Bioink by Bioglass Nanoparticles and Multiple Metal Ions for Tissue Engineering

Bhattacharyya Amitava,Khatun Mst Rita,Narmatha S.,Nagarajan R.,Noh Insup 한국조직공학과 재생의학회 2024 조직공학과 재생의학 Vol.21 No.2

Background: Bioglasses are used in applications related to bone rehabilitation and repair. The mechanical and bioactive properties of polysaccharides like alginate and agarose can be modulated or improved using bioglass nanoparticles. Further essential metal ions used as crosslinker have the potential to supplement cultured cells for better growth and proliferation. Method: In this study, the alginate bioink is modulated for fabrication of tissue engineering scaffolds by extrusion-based 3D bioprinting using agarose, bioglass nanoparticles and combination of essential trace elements such as iron, zinc, and copper. Homogeneous bioink was obtained by in situ mixing and bioprinting of its components with twin screw extruder (TSE) based 3D bioprinting, and then distribution of metal ions was induced through post-printing diffusion of metal ions in the printed scaffolds. The mechanical and 3d bioprinting properties, microscopic structure, biocompatibility of the crosslinked alginate/agarose hydrogels were analyzed for different concentrations of bioglass. The adipose derived mesenchymal stem cells (ADMSC) and osteoblast cells (MC3T3) were used to evaluate this hydrogel’s biological performances. Results: The porosity of hydrogels significantly improves with the incorporation of the bioglass. More bioglass concentration results in improved mechanical (compressive, dynamic, and cyclic) and 3D bioprinting properties. Cell growth and extracellular matrix are also enhanced with bioglass concentration. Conclusion: For bioprinting of the bioinks, the advanced TSE head was attached to 3D bioprinter and in situ fabrication of cell encapsulated scaffold was obtained with optimized composition considering minimal effects on cell damage. Fabricated bioinks demonstrate a biocompatible and noncytotoxic scaffold for culturing MC3T3 and ADMSC, while bioglass controls the cellular behaviors such as cell growth and extracellular matrix formation. Background: Bioglasses are used in applications related to bone rehabilitation and repair. The mechanical and bioactive properties of polysaccharides like alginate and agarose can be modulated or improved using bioglass nanoparticles. Further essential metal ions used as crosslinker have the potential to supplement cultured cells for better growth and proliferation. Method: In this study, the alginate bioink is modulated for fabrication of tissue engineering scaffolds by extrusion-based 3D bioprinting using agarose, bioglass nanoparticles and combination of essential trace elements such as iron, zinc, and copper. Homogeneous bioink was obtained by in situ mixing and bioprinting of its components with twin screw extruder (TSE) based 3D bioprinting, and then distribution of metal ions was induced through post-printing diffusion of metal ions in the printed scaffolds. The mechanical and 3d bioprinting properties, microscopic structure, biocompatibility of the crosslinked alginate/agarose hydrogels were analyzed for different concentrations of bioglass. The adipose derived mesenchymal stem cells (ADMSC) and osteoblast cells (MC3T3) were used to evaluate this hydrogel’s biological performances. Results: The porosity of hydrogels significantly improves with the incorporation of the bioglass. More bioglass concentration results in improved mechanical (compressive, dynamic, and cyclic) and 3D bioprinting properties. Cell growth and extracellular matrix are also enhanced with bioglass concentration. Conclusion: For bioprinting of the bioinks, the advanced TSE head was attached to 3D bioprinter and in situ fabrication of cell encapsulated scaffold was obtained with optimized composition considering minimal effects on cell damage. Fabricated bioinks demonstrate a biocompatible and noncytotoxic scaffold for culturing MC3T3 and ADMSC, while bioglass controls the cellular behaviors such as cell growth and extracellular matrix formation.

Study of rganized Assemblies and Surfaces Using Picosecond Lasers

Bhattacharyya, Kankan Korean Society of Photoscience 1999 Journal of Photosciences Vol.6 No.3

Dynamics of many ultrafast processes are markedly slowed down in various organized molecular assemblies compared to ordinary liquids. We will show that the solvation dynamics of water molecules is affected amost dramatically and is retarded by 3 ∼4 orders of magnitude in microemulsions, micells and lipids. We will also discuss how the access to fewer water molucules and the drastically altered local pH in an organized asembly affected the excited state proton transfer processes. Finally, we will show how surface second haromonic generation can be used to study the air-water surface.

Volatile compounds from Alcaligenes faecalis JBCS1294 confer salt tolerance in Arabidopsis thaliana through the auxin and gibberellin pathways and differential modulation of gene expression in root and shoot tissues

Bhattacharyya, D.,Yu, S. M.,Lee, Y. H. Springer Science + Business Media 2015 Plant growth regulation Vol.75 No.1

A cocktail of volatile compounds emitted from <i>Alcaligenes faecalis</i> JBCS1294 induces salt tolerance in <i>Arabidopsis thaliana</i> by modulating hormonal pathways and ion transporters

Bhattacharyya, Dipto,Lee, Yong Hoon G. Fischer 2017 Journal of Plant Pathology Vol. No.

<P>In our previous study we showed that volatile organic compounds (VOCs) from Alcaligenes faecalis JBCS1294 (JBCS1294) induced tolerance to salt stress in Arabidopsis thaliana by influencing the auxin and gibberellin pathways and upregulating the expression of key ion transporters. The aim of this study was to evaluate the contribution of each VOC and blends of the VOCs on the induction of salt tolerance and signaling pathways. The key VOCs emitted from JBCS1294 were dissolved in lanolin and applied to one side of bipartite I-plates that contained Arabidopsis seeds on Murashige and Skoog (MS) media supplemented with NaCl on the other side. Changes in plant growth were investigated using Arabidopsis mutant lines and hormone inhibitors, and gene expression was assessed by real-time PCR (qPCR). Among the VOCs, butyric acid conferred salt tolerance over a concentration range of 5.6 mu M (10 ng)-56 mM (100 mu g), whereas propionic and benzoic acid were effective at micromolar doses. Intriguingly, the optimized cocktail of the three VOCs increased fresh weight of Arabidopsis under salt stress compared to that achieved with each single compound. However, Arabidopsis growth was not promoted by the VOCs without salt stress. Exogenous indole-3-acetic acid (IAA) application arrested salt tolerance or growth promotion of Arabidopsis induced by volatiles from propionic acid, but not from butyric acid and an optimized volatile mixture of butyric acid, propionic acid, and benzoic acid (1PBB). High and intense auxin-responsive DR5:GUS activity was observed in the roots of Arabidopsis grown on media without salt via 1PBB, butyric acid, and benzoic acid. Growth promotion by the cocktail was inhibited in the eir1 mutant and in Col-0 plants treated with inhibitors of auxin and gibberellin. The present study clearly demonstrated the effects of individual VOCs and blends of VOCs from a rhizobacterial strain on the induction of salt stress. The results with the blend of VOCs, which mimics bacterial emissions in nature, may lead to a deeper understanding of the interaction between rhizobacteria and plants.</P>

Vertical and Horizontal Intra Industry Trade in Some Asian and Latin American Less Developed Countries

Bhattacharyya, Ranajoy 세종대학교 국제경제연구소 2002 Journal of Economic Integration Vol.17 No.2

A casual look at the intra industry trade(IIT) data of eighteen Asian and Latin American less developed countries show that for them (a) vertical IIT overwhelmingly dominates horizontal IIT and(b) manufactured goods (SITC 6) is one of the two commodity categories (the other being machine and transport equipments (SITC 7))for which IIT is relatively high. A theoretical model consistent which these observation is contructed and suggests the hypothesis that the level of economic development is a determining character for such kind of trade. Returning to the raw data set we find that such a relationship can indeed be established. Though the overall relationship clearly holds, there are major fluctuations with in the sample and the overall growth rate of IIT falls with increasing levels of economic development.

Accumulation of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn in urban soil and their mobility characteristics

Bhattacharyya, Krishna G.,Mahanta, Mayur J. Techno-Press 2014 Advances in environmental research Vol.3 No.4

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

DYNAMICS OF A PREY-PREDATOR INTERACTION WITH HASSELL-VARLEY TYPE FUNCTIONAL RESPONSE AND HARVESTING OF PREY

BHATTACHARYYA, ANINDITA,MONDAL, ASHOK,PAL, A.K.,SINGH, NIKHITA The Korean Society for Computational and Applied M 2022 Journal of applied mathematics & informatics Vol.40 No.5-6

This article aims to study the dynamical behaviours of a two species model in which non-selective harvesting of a prey-predator system by using a reasonable catch-rate function instead of usual catch-per-unit-effort hypothesis is used. A system of two ordinary differential equations(ODE's) has been proposed and analyzed with the predator functional response to prey density is considered as Hassell-Varley type functional responses to study the dynamics of the system. Positivity and boundedness of the system are studied. We have discussed the existence of different equilibrium points and stability of the system at these equilibrium points. We also analysed the system undergoes a Hopf-bifurcation around interior equilibrium point for a various parametric values which has very significant ecological impacts in this work. Computer simulation are carried out to validate our analytical findings. The biological implications of analytical and numerical findings are discussed critically.

Volatile Indole Produced by Rhizobacterium Proteus vulgaris JBLS202 Stimulates Growth of Arabidopsis thaliana Through Auxin, Cytokinin, and Brassinosteroid Pathways

Bhattacharyya, D.,Garladinne, M.,Lee, Y. H. Springer Science + Business Media 2015 Journal of plant growth regulation Vol.34 No.1