http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yiding Wang,Jianhui Su,Jidong Lai,Bao Xie,Yong Shi,Hongru Yu 전력전자학회 2022 JOURNAL OF POWER ELECTRONICS Vol.22 No.1
Brushless doubly fed generator (BDFG) generally adopts double closed-loop vector control strategies. Owing to the influence of BDFG coupling parameters, the accuracy of feedforward decoupling parameters is very important; however, the complexity of the BDFG model makes its winding parameters difficult to identify. On the basis of the characteristics of the BDFG system control model and the decoupling control conditions, this study proposes a method for identifying the integrated coupling parameter. This method first uses particle swarm optimization to identify the coefficients of the current closed-loop transfer function. Then, the values of the integrated coupling parameters are calculated on the basis of the relationship between the coefficients of the current closed-loop transfer function and the integrated coupling parameters of the BDFG. This method bypasses the challenge of directly identifying BDFG winding parameters and can be used directly to design the controller. Experiments are performed using a 30 kW BDFG platform to prove the feasibility and effectiveness of the proposed method.
Fei Zhai,Yong Shi,Bao Xie,Jianhui Su,Xun Jiang 전력전자학회 2023 ICPE(ISPE)논문집 Vol.2023 No.-
In view of the defects of traditional droop control with differential regulation and the problems of uneven power sharing, slow regulation speed and complex controller design in some distributed secondary control methods, this paper proposes a secondary control strategy of microgrid based on distributed consensus algorithm. It uses the control quantity information of the distributed generations on the adjacent nodes collected by the communication network to obtain the secondary regulation quantity and send it to the droop control to shift the droop curve. After the load fluctuation occurs, the system can not only realize the rapid and stable frequency and voltage regulation, but also ensure the reasonable sharing of the output power of the distributed generations involved in the regulation. Finally, a model was built on MATLAB/Simulink platform to verify the effectiveness of the proposed control strategy.
Zhou Ying,Tao Ke,Liu Aimin,Rui Jia,Bao Jianhui,Sun Yufeng,Yang Sanchuan,Wang Qinqin,Zhang Qiang,Yang Songbo,Cao Yujia,Qu Hui 한국물리학회 2020 Current Applied Physics Vol.20 No.7
In this paper, Tunnel Oxide Passivated Contact (TOPCon) silicon solar cells with the industrial area (244.32 cm2) are fabricated on N-type silicon substrates. Both the ultra-thin tunnel oxide layer and phosphorus doped polycrystalline silicon (polysilicon) thin film are prepared by the LPCVD system. The wrap-around of polysilicon is observed on the surface of borosilicate glass (BSG). The polysilicon wrap-around can form a leakage current path, thus degrades the shunt resistance of solar cells, and leads to the degradation of solar cell efficiency. Different methods are adopted to treat the polysilicon wrap-around and improve shunt resistance of solar cells. The experimental results indicate that a chemical etching method can effectively solve the problem of polysilicon wrap-around and improve the performance of solar cells. Finally, a conversion efficiency of 22.81% has been achieved by our bifacial TOPCon solar cells, with Voc of 702.6 mV, Jsc of 39.78 mA/cm2 and FF of 81.62%.