평준화도입이 학교브랜드 이미지, 교육품질과 학교성과에 미치는 영향: 포항시 인문계 고교에 대한 종단적 분석

이진춘 한국경영교육학회 2012 경영교육연구 Vol.27 No.1

본 연구는 고교 평준화제도 도입이 학교브랜드 이미지와 교육품질과 성과에 미치는 영향을 분석하는데 초점을 두고 있다. 이진춘(2009)과 이진춘과 최황(2008)의 연구에서 교육품질이 학교브랜드 이미지와 학교성과에 미치는 영향에 대해 분석을 실시하여, 교육품질이 학교브랜드 이미지를 결정하는 주요 요인이 아님을 밝혔다. 실제로 상위권 고등학교와 명문 고등학교의 브랜드 이미지가 고착되어 있으므로 입시 평준화제도의 도입이 학교브랜드 이미지에 영향을 주는가를 분석할 필요가 있다. 본 연구는 이를 검정하기 위한 일환으로, 포항시 인문계 고등학교를 평준화 도입 전과 후로 나누어 실증분석을 실시하였다. 그 결과 평준화제도가 도입이 상위권고등학교의 브랜드 이미지에 부정적인 영향을 주지 않았으며 오히려 강화시키고 있음을 밝혀내었다. In this study, we approach, in the perspective of management, one of the issues that had been most seriously debated time after time in Korea for the last decades or so. Is there any propensity for the scholastic achievement of high school students to decline, because they attend a high school without an entrance examination. This study focused on the issues that the change of admission policy in high school could have significant impact on the school brand image, education quality and scholastic performance. Some of previous researches, such as Lee(2009), Lee and Choi(2008), analyzed the relationship and influence of educational quality on the school brand image and scholastic performance, by empirical studies. They did not find any significant relationship between educational quality and school brand image. They found that the schools with high academic reputations had the established school brand image compared with schools with low academic reputations. However, the previous researches did not include the factor of admission policy whether the entrance exam was prohibited or not. So this study performed a longitudinal survey in the high schools of Pohang city, where the new admission policy had been introduced several years ago. We could guess that introduction of new admission policy would change the school brand image. This study found that the new admission policy of without-exam did not make significant changes in the school brand image and dit not influence the education quality and scholastic performance.

공구매거진 용량 제약하에서 뱃치 수의 최소화

이진춘 한국생산관리학회 1990 韓國生産管理學會誌 Vol.1 No.2

성대돌기 육아종(Vocal Process Granuloma)의 치료

이진춘,왕수건 대한이비인후과학회 2005 대한이비인후과학회지 두경부외과학 Vol.48 No.1

Background and Objectives:Vocal process grnauloma is a relatively rare disease caused by laryngopharyngeal reflux, vocally abusive behavior and endotracheal intubation etc. However, management of these diseases is not clearly identified except for and investigated treatment modality. Subjects and Method:Fifty-eight cases were analyzed in this study. All cases were classified as remarked above. These patients were treated by medical treatment such as PPI (proton-pump inhibitor), H2-blocker, prokinetics, steroid inhalant, Botox injection and voice therapy. Results:Contact granuloma was healed in 62.5% mainly pokinetics and PI or H2 blocker. Botox injection was applied in 2 refractory cases of contact granuloma. Al of 2 cases were healed after Botox injection. Conclusion:These results sugest that voice therapy and Botox injection are efective aditional treatment modalities in refractory cases.

FMS 評價를 위한 槪念模型의 設計

李鎭春 慶一大學校 1988 論文集 Vol.4 No.1

Modern industrial corporations have been moving increasingly towards computer-based automation equipment in efforts to retain or restore their worldwide competitive edge. The tremendous intrest of corporations to adopt this technology has expectedly drawn focus and research on evaluation of flexible manufacturing systen(FMS) investment. A survey of existing literature on evauation of FMS investments indicates the widespread realization that traditional discounted cash flow approaches are inadequate for the purpose. Beyond this realization howevwe, the literature does not suggest any explicit analytical framework to overcome this deficiency. The purpose of this paper is to provide a conceptual framwork to integrate three aspects of the system, i.e. strategic, opreational and financial impacts. The framework is based on the system value concept that is consisted of the strategic value, operational value and financial value. This paper needs an additional study for the sake of describing the real situation to be applicated in practices.

교육품질이 학교 브랜드 이미지에 미치는 영향

이진춘,최황 한국경영교육학회 2008 경영교육연구 Vol.49 No.-

This study tried to survey empirically to identify the major factors which had influenced to the school brand image, in the context that the school brand image is a dual scale of the education quality. In this study, the quality of education is divided into two sub-factors, in view of the dimension of software and hardware, such as quality of education service and quality of education environment. Then indicators of school brand image had been extracted to test the relationship with the education quality. Also, in this study, in order to test the relationship among latent variables such as the factors suggested above. structural equation modelling is adapted. It is very rational and valid to analyze the relationship among latent variables in order to maintain the analysis level of constructed concepts. For empirical survey, 413 responds of 17 schools in Pohang region, were collected and then analyzed by using AMOS, which had a good reputation of usefulness and convenience. Concludingly, the quality of education service was more important and effective factor to the school brand image in the upper group, so called distinguished schools. In the other hands, the quality of education environment was more important than that of education service in the lower group, so called undistinguished schools. From these results, a plan for the high school in Pohang region to establish the school brand image could be formulated. 본 연구는 학교브랜드 이미지가 학교교육품질의 쌍대척도라는 관점에서, 학교브랜드 이미지를 결정하는 요소를 파악하는데 초점을 두었다. 즉, 교육부문에서 무한경쟁이 시작되는 시점에서 학교브랜드 이미지에 교육품질이 미치는 영향을 평가하는 실증연구를 시도하였다. 우선, 본 연구에서는 교육품질을 소프트웨어부문인 교육서비스품질과 하드웨어인 교육환경품질로 나누고 이들의 구성요소를 도출하고 학교브랜드이미지를 구성하는 요소들을 규정하였다. 이들 3가지 잠재변인들 간의 영향관계를 분석하기 위해 구조방정식모형을 이용하였다. 실증분석을 위해 포항지역 17개 학교의 학생들을 대상으로 설문조사를 실시하여 413부의 응답을 수집한 다음 AMOS를 이용하여 분석하였다. 분석결과, 소위 명문고인 상위집단에서는 교육서비스 품질이 학교브랜드 이미지를 결정하는 중요한 요소인 반면에, 하위집단인 비명문고에서는 교육환경품질이 더 큰 영향을 미치는 것으로 나타났다. 이는 학교에서 브랜드 이미지를 높이는 방안을 제시하고 있는 것으로 평가된다.

『獨占規制 및 公正去來法에 관한 一考』 : 韓國에서의 그 限界와 문제점을 中心으로

李鎭春 경북대학교 경상대학 1981 經商論叢 Vol.5 No.-

유연흐름시스템에서 fuzzy목표 개념을 이용한 다목표 뱃칭모형

李鎭春 경일대학교 산업기술연구소 1991 産業技術硏究所 論文集 Vol.1 No.-

In this study, a batching model for Flexible Flow Systems(FFS) was proposed. For batching part orders, the multiple-goal model was designed using fuzzy goal concepts and its usefulnesses was analyzed. The multiple goals included minimizing the number of batches, balancing workloads between machine groups, and meeting the due dates of part orders. The proposed model was compared with other models with respect to minimizing the number of batches. Because the supreme goal of maximizing the production rate in FMS production planning can be converted into the surrogate goal of minimizing the make-span, and beacause minimizing the number of batches means minimizing the set-up times, minimizing the set-up times makes the make-span shorter if all other conditions are held constant.

자동차 부품제조업의 POP시스템 구축

李鎭春 慶一大學校 1999 論文集 Vol.16 No.3

The purpose of this paper is developing POP(Point-of-Production) System, in an automobile parts manufacturing firm, which is csapable to provide real-time information to managers as well as to the front engineers. The characteristics of developed system are as follows; First, the system is developed under client/server environment to be possible of sharing the database between users including managers and the front operators. Second, the system is constructed by adapting Window NT and Oracle as server, and is desinged to be able to gather the real-time information of the operation front. Third, the system is designed to minimize the error of operations by making the operators input the required information through the touch screen and/or through simple operations. Fourth, the system desing technology can be extended to other process of factories so easily that the investment cost must be minimized.

불균형 생산시스템에서 Pull 방식과 Push 방식의 성과의 차이 비교

李鎭春 慶一大學校 1989 論文集 Vol.5 No.1

Production system with a multistage production process can be classified into two species, namely Push or Pull systems. The former is a conventional approach in which inventoried parts at each stage are forecast, considering the total flow time to the completion of the process at the final stage. Production and inventory control is based on the forecast value. The latter usess so called just-in-time method which decides a certain amounts of inventory and the production oredr at each stage by the volume replenished at the succeeding stage. Japanese firm’s sucess has been regarded as the results of employing just-in-time with kanban. While U.S. firms that employ the conventional approach have shown the inferior managerial performances relative to Japanese’. So this paper studies the factors of differences in the performances of the shop floor between the above-mentioned two systems.

알코올이 Dynamic Posturography에 미치는 영향

이진춘,고의경,장민호,이병주,백무진,노환중,왕수건,전경명 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.2