http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
콘크리트 재료의 동적 물성 변화를 모사하기 위한 유변학적(Rheological)모델 개발 및 평가
황영광,임윤묵,Hwang, Young Kwang,Lim, Yun Mook 대한토목학회 2015 대한토목학회논문집 Vol.35 No.4
본 연구에서는 속도 의존성을 나타내는 콘크리트의 인장거동을 모사하기 위하여 유변학적(rheological) 모델을 개발하였고 이를 평가하였다. 일반적으로 외부에서 가해지는 하중 속도가 증가할수록 콘크리트의 물성(강도, 탄성계수, 파괴에너지 등)은 그 크기가 증가한다. 콘크리트의 강도는 다른 물성에 비하여 큰 속도의존성을 나타내고, 압축 하중인 경우보다 인장 하중을 받는 경우 그 속도의존성이 크게 나타난다. 이러한 콘크리트의 속도 의존성을 모사하기 위하여, 기존 RBSN(Rigid-Body-Spring-Network) 모델의 거동을 나타내는 스프링 세트에 대쉬포트(Dashpot)와 같은 점성 요소와 Coulomb 마찰 요소를 조합하였다. 요소의 조합에 따라 세 가지 모델( 1)점탄성, 2)점소성, 3)점탄소성 손상(Damage 모델)을 고려하였고, 이에 대한 구성관계식을 유도하였다. 개발된 해석모델은 직접인장 실험의 응력-변형률 관계곡선과 비교 검증되었고, 이중 점탄소성 손상 모델은 실험결과를 잘 모사할 수 있음을 확인하였다. In this study, the rheological models were introduced and developed to reflect rate dependent tensile behaviour of concrete. In general, mechanical properties(e.g. strength, elasticity, and fracture energy) of concrete are increased under high loading rates. The strength of concrete shows high rate dependency among its mechanical properties, and the tensile strength has higher rate dependency than the compressional strength. To simulate the rate dependency of concrete, original spring set of RBSN(Rigid-Body- Spring-Network) model was adjusted with viscous and friction units(e.g. dashpot and Coulomb friction component). Three types of models( 1) visco-elastic, 2) visco-plastic, and 3) visco-elasto- plastic damage models) are considered, and the constitutive relationships for the models are derived. For validation purpose, direct tensile test were simulated, and characteristics of the three different rheological models were compared with experimental stress-strain responses. Simulation result of the developed visco-elasto-plastic damage(VEPD) model demonstrated well describing and fitting with experimental results.
이무강,황정욱,최영광 한국환경과학회 1996 한국환경과학회지 Vol.5 No.1
During the last two decades, many industrial complexes for heavy and chemical industries have been established along the Korean coastline, thereby increasing the pollution materials burden on the coastal environment of seawater. Masan Bay is one of the most polluted coastal areas in Korea and the main soures of pollutants are domestic and industrial wastewater from Masan, Changwon. This study was aimed to evaluate relationships among the physicochemical parameters in the bottom water of Masan bay and to examine environmental factors affecting to pollutions of seawater by factor analysis. The factor loading, 1 is showed higher increasing inclination after 1989 year in station 1. The variance of pollutant materials is showed 43.7% in which the coastal inflow water is indicated external loadings(factor 1 : NO_3^- -N, TN, factor 4 : SiO_2-Si) corresponded to domestic sewage, industrial wastewater, and earth-sands in the bottom water of Masan bay. And the internal loadings(factor 2 : SS, salinity, factor 3 : W.T., DO) are explained 33.8% corresponded the phenomena of sedimentary layer and oxygen concentration. Therefore, The external loadings are explained by the higher factor pollutantal variance in Masan bay.